de Bem, D H; Trentin, P O and Medeiros-Junior, R A (2022) Effect of hydrated lime on efflorescence formation. International Journal of Building Pathology and Adaptation, 40(5), pp. 775-790. ISSN 23984708
Abstract
Purpose: Efflorescence formation is very common in cement-based materials. In the case of mortar, efflorescence is more studied when only Portland cement is used as a binder. However, the repair of historical heritage, as well as the construction system of some countries, usually uses mortars composed of hydrated lime and Portland cement. This study aims to determine the influence of the hydrated lime content on the incidence of efflorescence in mortars. Design/methodology/approach: Mortars with 0%, 50%, and 100% lime/cement ratio were studied, using three different methods to accelerate efflorescence formation. The surface area of mortars affected by efflorescence was quantified by analysis using image software. Also, analysis of mercury intrusion porosity test, flexural tensile, compressive strength, absorption of water by capillarity, porosity, XRD and TGA was performed. Findings: More efflorescence in mortars with a higher amount of lime in their composition was observed. The results show that the increase in the lime content reduces the flexural tensile and the compressive strength and increased the absorption of water by capillarity and the porosity of the mortars. The material formed by the efflorescence was calcium carbonate, proven by microstructural tests. Originality/value: The results of greater efflorescence formation in mortars with lime are important to alert users who apply this type of material. Some type of protection must be done more rigorously for lime-cement mortars, especially concerning contact with water, since efflorescence tends to be faster for this type of material.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | compressive strength; efflorescence; lime; mortars |
| Index terms: | compressive strength, lime, methodology, construction system, repair, mortars (material) |
| Subjects: | maintenance engineering, research methods, material analysis and testing, building construction, building materials |
| Topics: | Business Strategy, Research Practice, Construction Materials, Engineering Principles |
| Descriptive scope: | 3 PCT |
N.B. Descriptive scope is a count of how many of the five facets of empirical research are indicated by the words used in title, abstract and keywords. It is not intended as a judgement on the research; merely a count of the kind of word we would expect to indicate Phenomenon, Concepts, Theoretical framing, Empirical techniques, Analytical techniques. If all five are present, then a code of “5 PCTEA” will indicate this. If you feel the coding for this record is questionable, we welcome discussion around the terms we matched or the way we categorized them. The facet you would expect may not be coded, or a facet may be coded inappropriately. This can also bear on a larger question, of which facets should be treated as defining in construction management research. Please get in touch, and we will look at it. More details here