González, J; Da Costa, B B F; Tam, V W Y and Haddad, A (2024) Effects of latitude and building orientation in indoor-illuminance levels towards energy efficiency. International Journal of Construction Management, 24(7), pp. 784-798. ISSN 1562-3599
Abstract
As a matter of concern in sustainable buildings, daylight is studied to improve the balance between visual comfort for the occupants and energy consumption. This study analyzed the effects of latitude and orientation on the sunlight illuminance level within a northwest/southeast-oriented hypothetical house, with a wide-glassed façade, by integrating the BIM and BEM methodologies. The house was located in five different locations showing different latitudes: Búzios, Brazil; Capri, Italy; Punta Cana, Dominican Republic; Dubai, United Arab Emirates; and Sydney, Australia. Five different studies were carried out for each one of them by using the Autodesk REVIT energy-analysis tool named Lighting; they included sun-path analysis, calculation of daylight factor and daylight autonomy, and evaluation of daylight illuminance levels. It was found that a high amount of sunlight enters the house on its rear side, where are located the most occupied rooms, predominantly in the summer season, in the afternoon hours; however, 67% of the total house is below the 2% of daylight factor threshold. Withal, the rear-side rooms are the ones that satisfy most of the time with illumination levels above 300 lux, with maximum levels varying according to the season. This research contributes to associating BIM and BEM methodologies as an option to improve the design of energy-efficient buildings, being possible to consider further improvements to enhance the illuminance in the rooms, both for the early design stages and for future retrofit plans.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | building energy modeling; building information modeling; building orientation; energy efficiency; latitude |
| Index terms: | Brazil, Dubai, energy modelling, sunlight, United Arab Emirates, methodology, sustainable building, Italy, Dominican Republic, latitude, daylight factor, Australia, energy efficiency, building information modelling, illuminance, sun, energy-efficient building, visual comfort, path analysis, option, early design stage, energy consumption, summer |
| Subjects: | environmental engineering, statistical analysis, geographical data, information systems, decision analysis, building performance, Geography, sustainable design, sustainable construction, design process, research methods, renewable energy, energy systems, sustainability and energy, climate science |
| Topics: | Digital Applications, Design Practice, Risk Management, Sustainability, Research Practice, Geographical Context |
| Descriptive scope: | 4 PCTA |
N.B. Descriptive scope is a count of how many of the five facets of empirical research are indicated by the words used in title, abstract and keywords. It is not intended as a judgement on the research; merely a count of the kind of word we would expect to indicate Phenomenon, Concepts, Theoretical framing, Empirical techniques, Analytical techniques. If all five are present, then a code of “5 PCTEA” will indicate this. If you feel the coding for this record is questionable, we welcome discussion around the terms we matched or the way we categorized them. The facet you would expect may not be coded, or a facet may be coded inappropriately. This can also bear on a larger question, of which facets should be treated as defining in construction management research. Please get in touch, and we will look at it. More details here