Wind flow on and around u-shaped buildings

Purpose: This paper presents the numerical examination of wind pressure distributions on U-plan shaped buildings having four different depth ratios (DR) as 0.5, 1, 2 and 4 over wind incidence angle (WIA) of 0°. The purpose of this study is to investigate the effect of irregular building form, DRs, distances from the reentrant corner, wind velocity values on and around wind pressure distributions of the buildings. With this aim, ANSYS Fluent 20.0 Computational Fluid Dynamics (CFD) program is used for the analysis. Design/methodology/approach: Four U-shaped buildings having the same height, width and wing length but having different DR in plan were analyzed by the application of CFD package of ANSYS 20. With this purpose, wind pressure distributions on and around U-plan shaped buildings were analyzed for the wind velocity values of 2 and 5 m/s over WIA of 0°. Comprehensive results were obtained from the analyses. Findings: While the change in the DR values did not create a significant change in positive pressure coefficients on A and E surfaces, negative pressure values increased as the DR decreased. The negative pressure coefficients observed on the A and E surfaces become higher than the positive pressure coefficients with the decrease in the DR. On contrary to that condition, with the decrease in the DR, G surfaces take higher positive pressure coefficients than the negative pressure coefficients. The reason for this is that the DR decreases and negative pressure values on G surface significantly decrease. The effect of the DR on the pressure coefficients is remarkable on B and D surfaces. The negative pressure coefficients on the B and D surfaces tend to increase as the DR decreases. Research limitations/implications: This study focused on DRs and wind velocity values effect on pressure coefficients to limit variables. Different building wing dimensions did not take into account. Originality/value: Although there are a number of studies related to wind behavior of irregular plan shaped buildings, irregular building forms have not been extensively investigated parametrically, especially in terms of the effect of DR on wind pressures. This study is therefore designed to fill this gap by analyzing impacts of various parameters like building shape with various DRs, WIA and wind velocity values on wind pressure distributions and velocity distributions on and around the building.