O'Mahony, M M (1990) Recycling of materials in civil engineering. PhD thesis, University of Oxford, UK.
Abstract
Although Britain is relatively rich in natural aggregate reserves, planning approvals to develop new quarries are running at about half the rate of aggregate extraction. The use of secondary materials, such as recycled aggregate, might not create a major course of aggregate but if secondary material were used in less demanding situations, the quantity of natural aggregate required by the construction industry would be reduced. This dissertation reports mainly on laboratory tests conducted on crushed concrete and demolition debris to examine the potential use of these materials in new construction. Standard aggregate tests were conducted on the materials to check their compliance with the Specification for Highway Works (1986), particularly for use as aggregate in road sub-base layers. A more detailed examination of the aggregates was conducted with regard to CBR, shear strength and frost susceptibility where the influences of moisture content, density and particle packing on these properties were investigated. One part of the study involved examining the use of recycled aggregate as the coarse aggregate fraction in new concrete. An analysis of the shear strength data was conducted using the dilatancy index defined by Bolton (1986). From the frost susceptibility results, it was concluded that further work would be required in this area to determine the main factors which influence the frost heave of recycled aggregates. The recycled aggregate concrete compared well with the natural aggregate concrete and appeared to be of superior quality than that produced in other research. During the study, it became evident that the recycled aggregates could perform as well as limestone in most cases and therefore could be considered for many potential uses. Some recommendations are presented at the end of this dissertation for the development of a standard on recycled materials which would help to promote the use of recycled aggregates in the construction industry in Britain.
| Item Type: | Thesis (Doctoral) |
|---|---|
| Thesis advisor: | Milligan, G W E |
| Uncontrolled Keywords: | highway; civil engineering; compliance; recycling; civil engineer |
| Index terms: | construction industry, recycled materials, dissertation, density, moisture content, recycling, shear strength, aggregate, recycled aggregate, specification, laboratory, compliance, approval, civil engineer |
| Subjects: | research management, industry analysis, contractual condition, material properties and characteristics, health safety and environment, analytical methods, research dissemination and communication, contractual role, profession, waste management, materials science |
| Topics: | Roles and Professions, Sustainability, Health and Safety, Research Practice, Construction Materials, Engineering Principles, Contract Administration, Urban Studies |
| Descriptive scope: | 3 PCT |
N.B. Descriptive scope is a count of how many of the five facets of empirical research are indicated by the words used in title, abstract and keywords. It is not intended as a judgement on the research; merely a count of the kind of word we would expect to indicate Phenomenon, Concepts, Theoretical framing, Empirical techniques, Analytical techniques. If all five are present, then a code of “5 PCTEA” will indicate this. If you feel the coding for this record is questionable, we welcome discussion around the terms we matched or the way we categorized them. The facet you would expect may not be coded, or a facet may be coded inappropriately. This can also bear on a larger question, of which facets should be treated as defining in construction management research. Please get in touch, and we will look at it. More details here