Neya, I; Yamegueu, D; Messan, A; Coulibaly, Y; Ouedraogo, A L S N and Ayite, Y M X D (2025) Effect of cement and geopolymer stabilization on the thermal comfort: Case study of an earthen building in Burkina Faso. International Journal of Building Pathology and Adaptation, 43(3), pp. 283-301. ISSN 2398-4708
Abstract
Purpose: The stabilization of earthen blocks improves their mechanical strength and avoids adobe construction erosion due to rainwater. However, the stabilization affects the thermal properties of the earthen blocks, and thus their capacity to provide adequate thermal comfort to occupants. This article examines the influence of cement and geopolymer binders on thermal comfort in compressed earthen buildings in hot and arid climates. Design/methodology/approach: The test cell is on the building platform in Burkina Faso. The building is made of compressed earth blocks (CEB) consisting of laterite, water and binder. The thermal models of the building were implemented in EnergyPlus v9.0.1 software. Empirical validation is used to check whether the model used for the thermal dynamic simulation can reproduce with accuracy the thermal behavior in a real situation. The adaptive thermal comfort model of ASHRAE 55–2010 was used to assess thermal comfort in long-term hot and dry tropical conditions. Findings: The results show that the CEB buildings remain hot despite the use of cement or geopolymer binder. Indeed, with both cement and geopolymer binders, on a daily basis, 19 h and 15 h are uncomfortable during, respectively, the hot and cold seasons. An increase of 1% in cement content raises the comfort hours by 9.2 h during the hot season and 11.7 h during the cold season. Hence, the comfort time varies linearly with the cement content in the building material. Moreover, there is no linear relationship between comfort time and geopolymer rate. Research limitations/implications: Complementary work should also assess the influence of stabilization on building humidity levels. In fact, earthen materials are very sensitive to outdoor humidity and indoor humidity affects thermal comfort even if it is not taken into account in the ASHRAE adaptive thermal comfort model. Practical implications: The present study will certainly contribute to a better valorization of clay potential in countries with similar climatic conditions. Social implications: The use of geopolymer binder is a suitable ecological option to replace the cement binder. It is important to mention that nighttime comfort can be increased through passive strategies such as natural ventilation. Originality/value: Most CEB material stabilization analyses including cement and geopolymer ones were mostly investigated at the laboratory scale and less at the building scale. Also, the influence of the binder rate on the thermal performance of buildings made of cement and geopolymer has not yet been assessed. This paper fills this gap of knowledge by assessing the impact of cement and geopolymer binder rates on the thermal comfort of CEB dwellings.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | adaptative thermal comfort; Burkina Faso; cement; earthen architecture; empirical validation; geopolymer; hot semi-arid climate |
| Index terms: | mechanical strength, platform, case study, climatic condition, laterite, energyplus, comfort, thermal comfort, building material, stabilization, humidity, option, Burkina Faso, laboratory, strategy, accuracy, methodology, earthen material, natural ventilation, validation, thermal performance, thermal property, rainwater |
| Subjects: | research management, Geography, digital design, research methods, environmental science, economic analysis, materials science, climate science, environmental engineering, occupational health and safety management, decision analysis, material properties and characteristics, professional development, management, energy systems, building materials, sustainability and energy, data collection methods |
| Topics: | Design Practice, Digital Applications, Business Strategy, Research Practice, Construction Materials, Information Management, Health and Safety, Geographical Context, Engineering Principles, Risk Management, Sustainability |
| Descriptive scope: | 5 PCTEA |
N.B. Descriptive scope is a count of how many of the five facets of empirical research are indicated by the words used in title, abstract and keywords. It is not intended as a judgement on the research; merely a count of the kind of word we would expect to indicate Phenomenon, Concepts, Theoretical framing, Empirical techniques, Analytical techniques. If all five are present, then a code of “5 PCTEA” will indicate this. If you feel the coding for this record is questionable, we welcome discussion around the terms we matched or the way we categorized them. The facet you would expect may not be coded, or a facet may be coded inappropriately. This can also bear on a larger question, of which facets should be treated as defining in construction management research. Please get in touch, and we will look at it. More details here