Tsai, W-S (1995) Evaluation of geotextiles as separators in roadways. PhD thesis, University of Washington, USA.
Abstract
This study was performed to experimentally assess for separation geotextiles (1) their survivability, (2) their ability to retard fines migration, (3) their influence on subgrade pore pressure dissipation, and (4) their performance overlying stiff subgrades. This experimental study consisted of a full scale road test and laboratory model tests. A new design method was also developed. The results of the full scale road test indicated that the presence of a geotextile resulted in more uniform rut depths. The geotextiles did not, however, appear to reduce rut depths in test sections where the subgrades had a modest shear strength. Observations indicated that subgrade drainage during construction was enhanced by the thicker needlepunched nonwoven geotextiles. Based on the results from the laboratory model tests, Task Force 25 survivability recommendations can be applied to most geotextiles, but it is conservative for the two lightweight geotextiles tested. The presence of a geotextile increases the bearing capacity of the subgrade, if the geotextile can survive the construction process. Rut depth was significantly affected by the presence of a geotextile, but not geotextile type and weight. In terms of their filtration function, geotextiles performed as well as a granular filter. However, the use of a granular filter could result in large stress increases on the subgrade surface and deeper ruts. Under dynamic loading, peak pore pressures within the subgrades were not significantly influenced by geotextile type and weight. A test with an impervious separator had the highest long-persisting pore pressure. All separators performed well in retarding fines migration, if they survived the dynamic loading. Clogging in geotextiles was observed but it did not cause any significant increase in pore pressure. The results also showed that geotextiles may not be needed for good subgrades (CBR $>$ 7) and thick aggregate bases ($>$300 mm). A rut prediction formula was developed and verified by the results from the full scale road test. Based on the results from the laboratory model tests and Task Force 25 recommendations, a new design method for pavements with geotextiles as separators is proposed. Two examples are selected to illustrate the use of the new design method.
| Item Type: | Thesis (Doctoral) |
|---|---|
| Thesis advisor: | Holtz, R D |
| Uncontrolled Keywords: | drainage; geotextiles; migration |
| Index terms: | presence, migration, drainage, construction process, aggregate, shear strength, geotextile, laboratory, experiment, design method, loading |
| Subjects: | infrastructure and transport systems, data collection methods, environmental science, materials science, design methods, demography, building construction, construction operations, research management, material properties and characteristics |
| Topics: | Sustainability, Site Management, Design Practice, Urban Studies, Research Practice, Engineering Principles |
| Descriptive scope: | 3 PCE |
N.B. Descriptive scope is a count of how many of the five facets of empirical research are indicated by the words used in title, abstract and keywords. It is not intended as a judgement on the research; merely a count of the kind of word we would expect to indicate Phenomenon, Concepts, Theoretical framing, Empirical techniques, Analytical techniques. If all five are present, then a code of “5 PCTEA” will indicate this. If you feel the coding for this record is questionable, we welcome discussion around the terms we matched or the way we categorized them. The facet you would expect may not be coded, or a facet may be coded inappropriately. This can also bear on a larger question, of which facets should be treated as defining in construction management research. Please get in touch, and we will look at it. More details here