Items with Index Term: low cost

Abdollahzadeh, N; Farahani, A V; Soleimani, K and Zomorodian, Z S (2023) Indoor environmental quality improvement of student dormitories in Tehran, Iran. International Journal of Building Pathology and Adaptation, 41(1), pp. 258-278. ISSN 23984708

Aboshia, A M A; Rahmat, R A; Zain, M F M and Ismail, A (2017) Enhancing mortar strengths by ternary geopolymer binder of metakaolin, slag, and palm ash. International Journal of Building Pathology and Adaptation, 35(5), pp. 438-455.

Abouel-Enin, M A (1994) An empirical study of factors influencing the success of Egypt-United States of America joint ventures engaging in businesses in Egypt. PhD thesis, United States International University, USA.

Abreu, M M and Lordsleem, A C (2019) Aluminum formwork system: Loss and productivity. Built Environment Project and Asset Management, 9(5), pp. 616-627. ISSN 2044-124X

Adham, A (2018) The political economy of work in Saudi Arabia: a comparative labour process analysis in two firms. PhD thesis, De Montfort University, UK.

Adjei, E A (2015) Multi-objective optimisation of building design variables and its impact on office building performance: a case for Ghana. PhD thesis, University of Nottingham, UK.

Anisuddin, S and Khaleeq, S (2005) Deterioration and rehabilitation of concrete structures in hot and arid regions. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Azcarate-Aguerre, J F; Conci, M; Zils, M; Hopkinson, P and Klein, T (2022) Building energy retrofit-as-a-service: A total value of ownership assessment methodology to support whole life-cycle building circularity and decarbonisation. Construction Management and Economics, 40(9), pp. 676-689. ISSN 01446193

Baharudin, M R; Nasruddin, H N; Rahman, A A; Mahadi, M R and Noor, S B M (2018) Numerical model for individual time calculation for evacuation among secondary students. International Journal of Building Pathology and Adaptation, 36(5), pp. 450-470. ISSN 23984708

Bai, L (2013) RFID sensor-driven structural condition monitoring in integrated building information modeling environment. PhD thesis, University of Maryland, College Park, USA.

Birgonul, M T and Ozdogan, I D (2000) Competitiveness of Turkish contractors in international markets. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Bjork, B C (2012) A comparison of subscription and open access journals in construction management and related fields. Construction Economics and Building, 12(2), pp. 27-42. ISSN 2204-9029

Boes H, D A (2013) Public procurement at local level in the Netherlands: Towards a better client-contractor cooperation in a competitive environment. In: Smith, S D and Ahiaga-Dagbui, D D (eds.) Proceedings of 29th Annual ARCOM Conference, 2-4 September 2013, Reading, UK.

Boyd, D; Xiao, H and Chinyio, E (2005) Can knowledge-event approach work in construction SMEs? In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Catalina, A J (2016) Development of a statistical theory-based capital cost estimating methodology for light rail transit corridor evaluation under varying alignment characteristics. PhD thesis, University of Kentucky, USA.

Changwang, S; Shaowei, H; Haifen, Z; Fuqu, P; Changxi, S and Hao, Q (2024) Automatic detection of water supply pipe defects based on underwater image enhancement and improved yolox. Journal of Construction Engineering and Management, 150(10): 04024134, ISSN 0733-9364

Christensen, A N (2019) Identifying private construction project owner inefficiencies that affect project goals. PhD thesis, Iowa State University, USA.

Crawley, J; Domoney, L; O'Donovan, A; Wingfield, J; Dinu, C; Kinnane, O and O'Sullivan, P (2026) Towards a universal framework for heat pump monitoring at scale. Buildings & Cities, 7(1), pp. 75-91. ISSN 2632-6655

Cusack, M M (1984) The use and limitations of mathematical models in the planning and control of construction projects. Construction Management and Economics, 2(3), pp. 219-224. ISSN 01446193

Darlow, M J (1968) Investigations into line of balance scheduling house building. PhD thesis, Loughborough University, UK.

Dey, A; Islam, S T; Paul, B; Bandyopadhyay, S; Sengupta, P; Sanyal, N; Mondal, K P; Jubaer, A and Mitra, R (2022) Waterlogging mitigation and safe water supply: Lessons learnt from low-lying areas of basirhat municipality, India. International Journal of Disaster Resilience in the Built Environment, 13(3), pp. 386-403. ISSN 1759-5916

Domdouzis, K (2007) Applications of wireless sensor technologies in construction. PhD thesis, Loughborough University, UK.

El-Medany, W M (2014) A cost-effective programmable soc for network security using xilinx spartan 3an fpga. Journal of Engineering, Design and Technology, 12(2), pp. 280-291. ISSN 1726-0531

El-Medany, W M; Al-Omary, A; Al-Hakim, R and Nusaif, M (2014) Low cost real-time tracking system prototype using gm862 cellular quad band module. Journal of Engineering, Design and Technology, 12(3), pp. 389-407.

Ellabbar, K and Havard, T (2005) The accounting disclosure in developing countries: A comparative study of Libyan & Egyptian construction companies. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Fore, S and Mbohwa, C T (2010) Cleaner production for environmental conscious manufacturing in the foundry industry. Journal of Engineering, Design and Technology, 8(3), pp. 314-333. ISSN 1726-0531

Franco, Luiz Sergio (1992) Application of constructive rationalization guidelines for the technological development of constructive processes in unreinforced structural masonry. PhD thesis, Universidade de São Paulo, Brazil.

Frei, M (2021) Data-driven building retrofit using a wireless sensor network. DSc thesis, ETH Zürich, Switzerland.

Gee, S (2019) The development of an innovative, lean, mobile factory system to manufacture timber frame closed panels in temporary locations for use in the Assembly of Houses in the Affordable Rented Sector. PhD thesis, University of Liverpool, UK.

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Grant, E (2013) "Pack 'em, rack 'em and stack 'em": The appropriateness of the use and reuse of shipping containers for prison accommodation. Construction Economics and Building, 13(2), pp. 35-44. ISSN 2204-9029

Hamida, M B; Remøy, H; Gruis, V and Jylhä, T (2025) Circular building adaptability in adaptive reuse: Multiple case studies in the Netherlands. Journal of Engineering, Design and Technology, 23(1), pp. 161-183. ISSN 1726-0531

Hassandokht Mashhadi, A; Handy, R; Farhadmanesh, M; Rashidi, A; Honda, T; Sleeth, D K and Henry, T (2022) Feasibility study of using nebulizer-retrofitted uavs at construction projects: The case study of residential jobsites in Utah. Journal of Construction Engineering and Management, 148(10): 05022009, ISSN 0733-9364

Henrique, V B and Uberti, M S (2024) Characterization of parcels by remote sensing techniques. International Journal of Building Pathology and Adaptation, 42(2), pp. 278-293. ISSN 23984708

Herbsman, Z and Mitrani, J D (1984) INES: An interactive estimating system. Journal of Construction Engineering and Management, 110(1), pp. 19-33. ISSN 0733-9364

Horne, M; Hill, R and Giddings, R (1999) Visualization of photovoltaic clad buildings. Building Research & Information, 27(2), pp. 96-108. ISSN 0961-3218

Huang, C; Wang, Z K; Li, B; Wang, C; Xu, L S; Jiang, K; Liu, M; Guo, C X; Zhao, X F and Yang, H (2023) Discretized cell modeling for optimal layout of multiple tower cranes. Journal of Construction Engineering and Management, 149(8): 04023068, ISSN 0733-9364

Ibbotson, K (2020) Prioritising carbon reduction in UK public sector flood and coastal risk management. PhD thesis, University of Bolton, UK.

Jayaram, S and Gonzalez, E (2011) Design and construction of a low-cost economical thermal vacuum chamber for spacecraft environmental testing. Journal of Engineering, Design and Technology, 9(1), pp. 47-62. ISSN 1726-0531

Johnson, K A L (2013) Managing design for the delivery of best value. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(3), pp. 111-120. ISSN 17514312

Johnson, K D and Tatum, C B (1993) Technology in marine construction firms. Journal of Construction Engineering and Management, 119(1), pp. 148-162. ISSN 0733-9364

Kadir Pakir, A H (2003) Integration: A study in the context of low cost housing projects in Malaysia with special reference to the state of penang. PhD thesis, University College London, UK.

Kaewmoracharoen, M (2009) Feasibility of visualization and simulation applications to improve work zone safety and mobility. PhD thesis, Iowa State University, USA.

Kavishe, N and An, M (2016) Challenges for implementing public private partnership in housing projects in dar es salaam city, Tanzania. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

La Fleur, L (2019) Energy renovation of multi-family buildings in Sweden an evaluation of life cycle costs, indoor environment and primary energy use, and a comparison with constructing a new building. PhD thesis, Linköping University, Sweden.

Labib, Y N; Lotfallah, W B; Hanna, A S and Boulos, N W (2021) Development and application of performance index for comparative assessment of public capital projects. Journal of Construction Engineering and Management, 147(2): 04020175, ISSN 0733-9364

Lei, T; Seo, J; Liang, K; Xu, J; Li, H; Zhou, Y; Khan, M and Heung, K H (2024) Lightweight active soft back exosuit for construction workers in lifting tasks. Journal of Construction Engineering and Management, 150(7): 04024073, ISSN 0733-9364

Liu, X; Xu, F; Zhang, Z and Sun, K (2025) Fall-portent detection for construction sites based on computer vision and machine learning. Engineering, Construction and Architectural Management, 32(3), pp. 1499-1521. ISSN 0969-9988

Luo, L Z; Mao, C; Shen, L Y and Li, Z D (2015) Risk factors affecting practitioners' attitudes toward the implementation of an industrialized building system a case study from China. Engineering, Construction and Architectural Management, 22(6), pp. 622-643. ISSN 0969-9988

Madhubhashana, H S A; Perera, B A K S and Perera, C S R (2019) Post-tensioned concreting: its suitability for and acceptability in Sri Lanka. Journal of Engineering, Design and Technology, 17(4), pp. 719-735. ISSN 1726-0531

Marciano, E J (2003) Sustainable development and the cement and concrete industries. PhD thesis, Universite de Sherbrooke, Canada.

Montali, J; Overend, M; Pelken, P M and Sauchelli, M (2018) Knowledge-based engineering in the design for manufacture of prefabricated façades: Current gaps and future trends. Architectural Engineering and Design Management, 14(1-2), pp. 78-94. ISSN 1745-2007

Motlagh, K C (1992) Algorithms for computerised surface modelling and highway alignment design. PhD thesis, University of Strathclyde, UK.

Mselle, J and Sanga, S A (2018) Constraints facing incremental housing construction in Dar es Salaam, Tanzania. Journal of Construction in Developing Countries, 23(1), pp. 1-20. ISSN 1823-6499

Naim, M and Barlow, J (2003) An innovative supply chain strategy for customized housing. Construction Management and Economics, 21(6), pp. 593-602. ISSN 01446193

Nunes, M C M (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham, UK.

Odewole, A O (2020) Development of a collaborative innovation management framework to assist in the utilisation of agricultural waste as building materials in Nigeria. PhD thesis, University of Salford, UK.

Pourghazian, H (2008) Industrial construction methods for cost-effective and sustainable multi-storey buildings. PhD thesis, KTH Royal Institute of Technology, Sweden.

Powell, R (2012) Evaluating cognitive screening as a possible solution to reducing accidents and improving workplace productivity through early preventive detection of fatigue-impairment in the construction industry. PhD thesis, University of Bath, UK.

Proctor-Parker, C and Stopforth, R (2024) Radio frequency identification (RFID) stock control and geo-location data system from a moving vehicle. Journal of Engineering, Design and Technology, 22(1), pp. 159-181. ISSN 1726-0531

Purnomo, M R A; Anugerah, A R; Aulia, S F and Azzam, A (2021) A novel optimisation model in the collaborative supply chain with production time capacity consideration. Journal of Engineering, Design and Technology, 19(3), pp. 647-658. ISSN 1726-0531

Pusceddu, C; Blumberg, G; Salvalai, G and Imperadori, M (2017) The use of building technology to support disaster resilience: The case study of air shelter house. International Journal of Disaster Resilience in the Built Environment, 8(2), pp. 139-157. ISSN 1759-5916

Raghav, N and Bhola, A K (2024) Secured platform for healthcare data: Privacy preservation based blockchain environment. Journal of Engineering, Design and Technology, 22(2), pp. 365-384. ISSN 1726-0531

Sacks, R; Navon, R; Brodetskaia, I and Shapira, A (2005) Feasibility of automated monitoring of lifting equipment in support of project control. Journal of Construction Engineering and Management, 131(5), pp. 604-614. ISSN 0733-9364

Sayed, Ahmed Yehia Abdel Aziz El (2025) Design of novel formwork system and development of numerical model for comparison between formwork systems. PhD thesis, The American University in Cairo, Egypt.

Scott, J; Deveci, G; Edge, M and Martin, P (2004) Towards zero-heating: Affordable models for environmentally friendly housing in Scotland. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Shealy III, E W (2015) Decision environments to encourage more sustainable infrastructure outcomes. PhD thesis, Clemson University, USA.

Shiratuddin, M F (2009) Framework for context-aware information processing for design review in a virtual environment. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Silva, Edson Neves da (2021) Proposal for a management system integrating the principles of lean construction with the aspects of quality, safety, environment and occupational health management, focusing on small civil construction companies. PhD thesis, Universidade Federal Fluminense, Brazil.

Simon, M and Meyer, E L (2012) Low cost I-V system employing variable power supply unit as an electronic load. Journal of Engineering, Design and Technology, 10(3), pp. 330-344. ISSN 1726-0531

Singh, A (2011) Bayesian analysis for causes of failure at a water utility. Built Environment Project and Asset Management, 1(2), pp. 195-210. ISSN 2044-124X

Song, J (2005) Tracking the location of materials on construction projects. PhD thesis, University of Texas at Austin, USA.

Stopforth, R; Proctor-Parker, C and Davrajh, S (2019) Analysis of a low-cost anthropomorphic sensory platform for the world first minibus test. Journal of Engineering, Design and Technology, 17(2), pp. 434-455. ISSN 1726-0531

Thuesen, C and Hvam, L (2011) Efficient on-site construction: Learning points from a German platform for housing. Construction Innovation, 11(3), pp. 338-355. ISSN 1471-4175

Titus, S and Bröchner, J (2005) Managing information flow in construction supply chains. Construction Innovation, 5(2), pp. 71-82. ISSN 1471-4175

Troive, S (1998) Structural LCC design of concrete bridges. DrTech thesis, Kungliga Tekniska Hogskolan, Sweden.

Uniacke, H (2001) Design of a low cost ventilated photovoltaic cladding. PhD thesis, Cardiff University, UK.

Williams, P (1999) The successful management of air conditioned environments for the construction industry. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Windapo, A O and Goulding, J (2013) Value-based perspectives of stakeholders' building requirements in low cost and government subsidised housing projects in South Africa. Construction Innovation, 13(4), pp. 424-444. ISSN 1471-4175

Zachariah, J-A L (2003) Towards sustainable homes through optimization: An approach to balancing life cycle environmental impacts and life cycle costs in residential buildings. PhD thesis, University of Toronto, Canada.

Zaryoun, M and Hosseini, M (2019) Lightweight fiber-reinforced clay as a sustainable material for disaster resilient architecture of future buildings. Architectural Engineering and Design Management, 15(6), pp. 430-444. ISSN 1745-2007

Zhang, X (2018) Sustainable retrofitting of existing residential buildings at community scale in China. PhD thesis, Cardiff University, UK.