Items with Index Term: thickness

Abdalazeem, M E; Hassan, H; Asawa, T and Mahmoud, H (2024) Green roofs and thermal comfort: A comparative study of soil layers' seasonal thermal performance integrated with ventilation in hot climate. Architectural Engineering and Design Management, 20(2), pp. 358-389. ISSN 1745-2007

Abeysekera, W V K M (1997) A strategy for managing brickwork in Sri Lanka. PhD thesis, Loughborough University, UK.

Abuhishmeh, K S K (2023) Risk assessment of reinforced concrete sewer pipes under external loading and adverse environmental conditions using an adaptive neuro-fuzzy system. PhD thesis, University of Texas at Arlington, USA.

Al-Zubaidi, H and Allouzi, R (2025) Flexural behavior of slabs made of lightweight foamed concrete with basalt powder. Journal of Engineering, Design and Technology, 23(1), pp. 249-263. ISSN 1726-0531

Albayyaa, H; Hagare, D and Saha, S (2021) Energy conservation assessment of traditional and modern houses in sydney. Building Research & Information, 49(6), pp. 613-623. ISSN 0961-3218

Ali, G M; Kosa, J; Bouferguene, A and Al-Hussein, M (2021) Competitive assessment of ice and frozen silt mat for crane ground support using finite-element analysis. Journal of Construction Engineering and Management, 147(6): 04021038, ISSN 0733-9364

Alidadi Shamsabadi, A; Jahangiri, M; Rezaei, T; Yadollahi Farsani, R; Seryani, A and Hakim, S (2022) The design of a seasonal heat storage system with a geothermal heat pump for a residential building in Tehran. Journal of Engineering, Design and Technology, 20(6), pp. 1606-1626. ISSN 1726-0531

Almasabha, G; Shehadeh, A; Alshboul, O and Al Hattamleh, O (2024) Structural performance of buried reinforced concrete pipelines under deep embankment soil. Construction Innovation, 24(5), pp. 1280-1296. ISSN 1471-4175

Anjaneyappa, V; Amarnath, M S and Srinivasamurthy, B R (2014) Compacting characteristics of light compacting equipment. Journal of Construction Engineering and Management, 140(5): 04014003, ISSN 0733-9364

Bai, Y (1996) Planning and control model for robotic bridge painting. PhD thesis, North Carolina State University, USA.

Bai, Y (2007) Intelligent painting process planner for robotic bridge painting. Journal of Construction Engineering and Management, 133(4), pp. 335-342. ISSN 0733-9364

Bai, Y and Bernold, L E (2001) Quality control parameters for robotic bridge painting. Journal of Construction Engineering and Management, 127(2), pp. 142-148. ISSN 0733-9364

Butt, A A (2014) Life cycle assessment of asphalt roads: Decision support at the project level. PhD thesis, KTH Royal Institute of Technology, Sweden.

Chen, J (2021) Study on the joint mechanical properties of steel structure buildings. International Journal of Building Pathology and Adaptation, 39(4), pp. 655-665. ISSN 23984708

Chen, S and Jiang, Y (2008) Pavement reflective cracking control with coarse-aggregate asphalt mix interlayer. International Journal of Construction Education and Research, 4(3), pp. 200-209. ISSN 1557-8771

Choi, J; Hong, D H; Lee, S H; Lee, H Y; Hong, T; Lee, D E and Park, H S (2023) Multi-objective green design model for prestressed concrete slabs in long-span buildings. Architectural Engineering and Design Management, 19(5), pp. 531-549. ISSN 1745-2007

Commuri, S; Mai, A T and Zaman, M (2011) Neural network-based intelligent compaction analyzer for estimating compaction quality of hot asphalt mixes. Journal of Construction Engineering and Management, 137(9), pp. 634-644. ISSN 0733-9364

Contarini, A and Meijer, A (2015) LCA comparison of roofing materials for flat roofs. Smart and Sustainable Built Environment, 4(1), pp. 97-109. ISSN 2046-6099

Cote, B; Robinson, B; Gabr, M A and Borden, R H (2013) Performance-cost analysis of stabilized undercut subgrades. Journal of Construction Engineering and Management, 139(2), pp. 121-127. ISSN 0733-9364

Dadzie, John (2018) A model for predicting the energy performance of existing buildings upgraded with sustainable technologies. PhD thesis, University of Technology Sydney, Australia.

De Toldi, T; Craig, S and Sushama, L (2022) Internal thermal mass for passive cooling and ventilation: Adaptive comfort limits, ideal quantities, embodied carbon. Buildings & Cities, 3(1), pp. 42-67. ISSN 2632-6655

De Toldi, T and Pestre, T (2023) The relevance of cut-stone to strategies for low-carbon buildings. Buildings & Cities, 4(1), pp. 229-257. ISSN 2632-6655

Devine, R D; Barbachyn, S M; Thrall, A P and Kurama, Y C (2018) Effect of tripping prefabricated rebar assemblies on bar spacing. Journal of Construction Engineering and Management, 144(11): 04018099, ISSN 0733-9364

Dick, B M (2019) Diagnostic testing in the natural and built environment. PhD thesis, North Carolina State University, USA.

Eken, T Y; Sarioglu, C and Kucuk, I (2021) Corrosion behaviour of twin-roll cast 8006 aluminium alloy foil with different thicknesses for the food packaging industry. Journal of Engineering, Design and Technology, 19(6), pp. 1421-1432. ISSN 1726-0531

Eldin, N N and Senouci, A B (1992) Use of scrap tires in road construction. Journal of Construction Engineering and Management, 118(3), pp. 561-576. ISSN 0733-9364

Faircloth, Adam D (2022) Development of a non-destructive evaluation system for mass timber panels. MPhil thesis, Griffith University, Australia.

Farmer, I W (1996) Performance of chain trenchers in mixed ground. Journal of Construction Engineering and Management, 122(2), pp. 115-124. ISSN 0733-9364

Goto, Y (2012) Sustainable wooden building concept for central Japan. DSc thesis, ETH Zürich, Switzerland.

Ha, S K; Jang, J G; Park, S H and Lee, H K (2015) Advanced spray multiple layup process for quality control of sprayed FRP composites used to retrofit concrete structures. Journal of Construction Engineering and Management, 141(1): 04014060, ISSN 0733-9364

Hamilton-MacLaren, F (2013) Alternative, more sustainable, wall construction techniques than brick and block, for new housing in England and Wales. PhD thesis, Loughborough University, UK.

Han, S (2024) Understanding of AI-aided reality capture data for the development of BIM modeling for building façade inspections. PhD thesis, Marquette University, USA.

Hariri-Ardebili, M A (2015) Performance based earthquake engineering of concrete dams. PhD thesis, University of Colorado at Boulder, USA.

Hasheminasab, S and Kashi, E (2021) Finite element analysis of ports pavement under container loading. Journal of Engineering, Design and Technology, 19(2), pp. 497-508. ISSN 1726-0531

Hema, C; Nshimiyimana, P; Messan, A; Lawane, A and Van Moeseke, G (2024) Reducing overheating risk in naturally ventilated houses through the design of compressed earth blocks walls in hot dry climate. International Journal of Building Pathology and Adaptation, 42(6), pp. 1203-1222. ISSN 2398-4708

Ikaheimonen, J (1998) Construction loads on shores and stability of horizontal formwork. TaknDr thesis, Kungliga Tekniska Hogskolan, Sweden.

Imran, S A; Commuri, S; Barman, M; Zaman, M and Beainy, F (2017) Modeling the dynamics of asphalt-roller interaction during compaction. Journal of Construction Engineering and Management, 143(7): 04017015, ISSN 0733-9364

Johnston, D W; Kahn, K P and Phillips, J B (1989) Formwork pressures in tall and thick concrete walls. Journal of Construction Engineering and Management, 115(3), pp. 444-461. ISSN 0733-9364

Jones, W; Gibb, A; Goodier, C and Bust, P (2015) Managing the unknown: The health risks of nanomaterials in the built environment. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 31st Annual ARCOM Conference, 7-9 September 2015, Lincoln, UK.

Kang, Y-J (2000) Minimum life-cycle cost structural design against natural hazards. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Kibwami, N; Rukidi, D; Wesonga, R and Manga, M (2024) Achieving net zero for clamp kiln fired brick production: A case of Uganda. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Kim, S and Hammad, A (2024) Decision support system (DSS) for selecting sustainable insulation material using Pareto search and novel fuzzy-modified technique for order of preference by similarity to ideal solution (TOPSIS) approach. International Journal of Construction Management, 24(7), pp. 734-747. ISSN 1562-3599

Kulkarni, S; Edwards, D J; Parn, E A; Chapman, C; Aigbavboa, C O and Cornish, R (2018) Evaluation of vehicle lightweighting to reduce greenhouse gas emissions with focus on magnesium substitution. Journal of Engineering, Design and Technology, 16(6), pp. 869-888. ISSN 1726-0531

Lazaro, S. A. M.; Li, X. and Baba, V. F. (2026) Evaluating expanded polystyrene insulation for enhancing energy efficiency in residential buildings: A scalable model from Mozambique. Journal of Engineering, Design and Technology, 24(4), pp. 992-1011. ISSN 1726-0531

Lee, E B (2000) Constructability and productivity analysis for long life pavement rehabilitation strategies (LLPRS). PhD thesis, University of California, Berkeley, USA.

Li, C (2023) Efficient and accurate assessment of fire spread over external claddings in high-rise buildings. PhD thesis, University of Manchester, UK.

Lin, Y and Yang, W (2022) Tri-optimization of building shape and envelope properties using taguchi and constraint limit method. Engineering, Construction and Architectural Management, 29(3), pp. 1284-1306. ISSN 0969-9988

Liu, D; Sun, J; Zhong, D and Song, L (2012) Compaction quality control of earth-rock dam construction using real-time field operation data. Journal of Construction Engineering and Management, 138(9), pp. 1085-1094. ISSN 0733-9364

Liu, L and Wan, S (2024) Flexural bearing capacity of reinforced concrete beams reinforced with carbon fiber reinforced plastics strips and ultra-high performance concrete layers. International Journal of Building Pathology and Adaptation, 42(6), pp. 1126-1146. ISSN 2398-4708

Ma, B; Cai, Y; Zhang, H; Fan, Y; Wang, F; Wang, P; Lyu, Z and Zhao, Z (2025) Evaluating construction risks of ultralarge diameter bored pile in deep water using combination weighting with two-dimensional cloud optimization. Journal of Construction Engineering and Management, 151(8): 05025007, ISSN 0733-9364

Magoda, C M; Gryzagoridis, J and Kanyarusoke, K (2021) Effective heat conductivity of Honeycomb (porous) composite panel. Journal of Engineering, Design and Technology, 19(4), pp. 876-887. ISSN 1726-0531

Malekzadeh, H; Edwards, D J and Harris, F C (2005) Simulating the ground freezing process: a decision support model. Journal of Construction Research, 6(1), pp. 107-121. ISSN 1609-9451

Martínez Fernández, P; Villalba Sanchís, I; Insa Franco, R and Yepes, V (2022) Slab track optimization using metamodels to improve rail construction sustainability. Journal of Construction Engineering and Management, 148(7): 04022053, ISSN 0733-9364

Martínez-Rocamora, A; García-Alvarado, R; Casanova-Medina, E; González-Böhme, L F and Auat-Cheein, F (2020) Parametric programming of 3D printed curved walls for cost-efficient building design. Journal of Construction Engineering and Management, 146(5): 04020039, ISSN 0733-9364

Mohammadinia, M R (1997) Development of rational and defensible pay schedules for a performance specification using performance prediction and user and agency costs. PhD thesis, Polytechnic University, USA.

Naderi, S; Shabanlou, S; Javaheri-Tafti, M R and Yaghoubi, B (2025) Optimal design of diversion dams based on Upgraded Multi-Objective Particle Swarm Optimization (UMOPSO). International Journal of Construction Management, 25(8), pp. 876-886. ISSN 1562-3599

Nicholls, R (1991) Sandwich-barrel shell construction by inflation. Journal of Construction Engineering and Management, 117(1), pp. 131-147. ISSN 0733-9364

Nicholls, R (1992) Construction of grout-impregnated fabric-reinforced pipes. Journal of Construction Engineering and Management, 118(2), pp. 283-302. ISSN 0733-9364

Nunes, M C M (1997) Enabling the use of alternative materials in road construction. PhD thesis, University of Nottingham, UK.

Nursyamsi, N; Tarigan, J; Aswin, M; Abu Bakar, B H and Hardjasaputra, H (2024) Structural behaviour of the strengthened reinforced concrete beams using ultra high-performance fibre reinforced concrete layer. Construction Innovation, 24(3), pp. 725-746. ISSN 1471-4175

Patel, A J (1996) Development of fatigue based pay adjustment factors in performance-related specifications for full-depth asphalt concrete pavements. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Pomares, J C; González, A and Saura, P (2018) Simple and resistant construction built with concrete voussoirs for developing countries. Journal of Construction Engineering and Management, 144(8): 04018076, ISSN 0733-9364

Pourghazian, H (2008) Industrial construction methods for cost-effective and sustainable multi-storey buildings. PhD thesis, KTH Royal Institute of Technology, Sweden.

Prego, F J; Solla, M; Núñez-Nieto, X and Arias, P (2016) Assessing the applicability of ground-penetrating radar to quality control in tunneling construction. Journal of Construction Engineering and Management, 142(5): 06015006, ISSN 0733-9364

Qatawna, A; Allouzi, R and Qaqish, S (2024) Experimental and analytical behavior of one-way fiber foamed concrete slabs reinforced with/without glass fiber grid under 4-point flexural test. International Journal of Building Pathology and Adaptation, 42(6), pp. 1169-1184. ISSN 2398-4708

Rana, J; Hasan, R; Sobuz, H R and Tam, V W Y (2022) Impact assessment of window to wall ratio on energy consumption of an office building of subtropical monsoon climatic country Bangladesh. International Journal of Construction Management, 22(13), pp. 2528-2553. ISSN 1562-3599

Rana, M J; Hasan, M R; Sobuz, M H R and Sutan, N M (2021) Evaluation of passive design strategies to achieve nZEB in the corporate facilities: The context of bangladeshi subtropical monsoon climate. International Journal of Building Pathology and Adaptation, 39(4), pp. 619-654. ISSN 23984708

Resalati, S; Kendrick, C C and Hill, C (2020) Embodied energy data implications for optimal specification of building envelopes. Building Research & Information, 48(4), pp. 429-445. ISSN 0961-3218

Rodionova, A (2022) Robust and reliable building renovation strategies for environmental and economic performance. DSc thesis, ETH Zürich, Switzerland.

Rodrigues, C A (2017) Life-cycle environmental and cost assessment of building retrofits: Evaluating conventional and streamlined approaches. PhD thesis, Universidade de Coimbra, Portugal.

Ruiz, L; Gómez, E; Santos, A G and Vega, S (2010) Study of light-multi-layered façades. Engineering, Construction and Architectural Management, 17(1), pp. 65-77. ISSN 0969-9988

Sadooghi, P and Kherani, N P (2022) Influence of metallo-dielectric optical properties on thermal resistance and solar heat gain coefficient of multi-pane glazing systems in hot and cold climates. Architectural Engineering and Design Management, 18(6), pp. 894-910. ISSN 1745-2007

Sahebzadeh, S; Dalvand, Z; Sadeghfar, M and Heidari, A (2020) Vernacular architecture of Iran's hot regions; elements and strategies for a comfortable living environment. Smart and Sustainable Built Environment, 9(4), pp. 573-593. ISSN 2046-6099

Saxena, S K; Lourie, D E; Shah, N S and Singhal, K (1984) Equipment cost analysis for waste embankments. Journal of Construction Engineering and Management, 110(1), pp. 60-71. ISSN 0733-9364

Shafabakhsh, G A; Kashi, E and Akbari, A (2016) A comparison effect of aircraft main gear configuration on runway damages by led and fe method. Journal of Engineering, Design and Technology, 14(2), pp. 362-372.

Shan, B; Chen, B; Wen, J and Xiao, Y (2023) Thermal performance of cross-laminated timber (CLT) and cross-laminated bamboo and timber (clbt) panels. Architectural Engineering and Design Management, 19(5), pp. 511-530. ISSN 1745-2007

Shareef, S; Mushtaha, E S; Abu Dabous, S and Alsyouf, I (2024) Holistic analysis for the efficiency of the thermal mass performance of precast concrete panels in hot climate zones. Engineering, Construction and Architectural Management, 31(10), pp. 4184-4206. ISSN 0969-9988

Singh, P; Boora, A and Gupta, A K (2022) Sub-grade characteristics of clayey soil incorporating municipal solid waste incineration ash and marble dust. Journal of Engineering, Design and Technology, 20(3), pp. 712-726. ISSN 1726-0531

Solla, M; González-Jorge, H; Varela, M and Lorenzo, H (2013) Ground-penetrating radar for inspection of in-road structures and data interpretation by numerical modeling. Journal of Construction Engineering and Management, 139(6), pp. 749-753. ISSN 0733-9364

Sonawan, H; Sofia, E and Ramadhan, A (2022) Assessment of direct evaporative cooler performance with a cooling pad made from banana midrib and ramie fiber. Smart and Sustainable Built Environment, 11(3), pp. 469-482. ISSN 2046-6099

Stanic, N (2016) Assessment methods for structural and hydraulic properties of concrete sewer pipes. PhD thesis, Delft University of Technology, Netherlands.

Stino, R M (1999) Effect of spatial variables on bricklaying productivity and ergonomics. PhD thesis, University of Michigan, USA.

Susilo, A; Fitriah, F; Ayu Rachmawati, E T and Suryo, E A (2020) Analysis of landslide area of Tulung Subdistrict, Ponorogo, Indonesia in 2017 using resistivity method. Smart and Sustainable Built Environment, 9(4), pp. 341-360. ISSN 2046-6099

Tenpierik, M J and Cauberg, J J M (2010) Encapsulated vacuum insulation panels: Theoretical thermal optimization. Building Research & Information, 38(6), pp. 660-669. ISSN 0961-3218

Tenpierik, M J; Cauberg, J J M and Thorsell, T I (2007) Integrating vacuum insulation panels in building constructions: An integral perspective. Construction Innovation, 7(1), pp. 38-53. ISSN 1471-4175

Trinh, Hoang T (2021) Optimisation framework for sustainable design of concrete buildings. PhD thesis, Griffith University, Australia.

Uduwage Don, N L S; Panuwatwanich, K and Waidyasekara, K G A S (2025) Multicriteria selection practices in public tender evaluation process: The case of Sri Lanka. Built Environment Project and Asset Management, 15(3), pp. 733-751. ISSN 2044-124X

Visser, A T (1981) An evaluation of unpaved road performance and maintenance. PhD thesis, University of Texas at Austin, USA.

Walters, R; Jaselskis, E; Zhang, J; Mueller, K and Kaewmoracharoen, M (2008) Using scanning lasers to determine the thickness of concrete pavement. Journal of Construction Engineering and Management, 134(8), pp. 583-591. ISSN 0733-9364

Wang, H; Shen, J and Gao, D (2019) Seismic damage of gravity abutment in liquefied ground. Journal of Engineering, Design and Technology, 17(1), pp. 53-76. ISSN 1726-0531

Wang, J; Han, J; Chen, J; Ding, G; Feng, G; Liu, T and Guo, B (2022) Experimental and numerical study on the dynamic response of a superthick backfill subgrade under high-speed railway loading: A case study of qianjiang-zhangjiajie-changde railway. Journal of Construction Engineering and Management, 148(12): 05022014, ISSN 0733-9364

Wang, Z (2020) Building internal heat dissipation of special shaped columns composed of concrete-filled square steel tubes based on thermal bridge models. International Journal of Building Pathology and Adaptation, 38(3), pp. 441-449. ISSN 23984708

Xu, Z; Guo, X; Zhao, Y and Liu, X (2023) Performance of CFRP-bolted timber joints with slotted-in corrugated steel plates. Journal of Construction Engineering and Management, 149(12): 04023134, ISSN 0733-9364

Yang, F (2022) Ascending the pagoda: A ground-up exploration of the ancient construction methods of dayanta using virtual reality. PhD thesis, Ohio State University, USA.

Yemoh, O O; Opoku, R; Takyi, G; Adomako, E K; Uba, F and Obeng, G (2025) Green building adaptation in hot-humid climates: Assessment of coconut and corn husk fiber composite bricks as energy-efficient building envelopes. International Journal of Building Pathology and Adaptation, 43(6), pp. 1522-1540. ISSN 2398-4708

Yousefi, E; Ahmadian Fard Fini, A and Loganathan, S (2025) Production-oriented approach for optimal mass-customisation of floor panel layouts in cross-laminated timber (CLT) buildings. Engineering, Construction and Architectural Management, 32(9), pp. 5965-5988. ISSN 0969-9988

Yu, B (2013) Environmental implications of pavements: A life cycle view. PhD thesis, University of South Florida, USA.

Zhang, L; Wu, X and Liu, H (2016) Strategies to reduce ground settlement from shallow tunnel excavation: A case study in China. Journal of Construction Engineering and Management, 142(5): 04016001, ISSN 0733-9364

Zhou, J.; Zhou, Y.; Xiong, X. and Wang, F. (2026) Temperature monitoring and temperature control measures optimization of arch dam floor of flow channel during construction period. Engineering, Construction and Architectural Management, 33(7), pp. 5874-5900. ISSN 0969-9988