Journal of Engineering, Design and Technology - Volume 23

Li, H; Liang, M; Han, H and Zhang, W (2025) Building mechanism of the initial trust motivation of owners toward contractors. Journal of Engineering, Design and Technology, 23(1), pp. 51-68. ISSN 1726-0531

Hamida, M B; Remøy, H; Gruis, V and Jylhä, T (2025) Circular building adaptability in adaptive reuse: Multiple case studies in the Netherlands. Journal of Engineering, Design and Technology, 23(1), pp. 161-183. ISSN 1726-0531

Edouard, M B; Camille, J; Vincent, B and Améziane, A (2025) Design for mixed model final assembly line (dfmmfal): A new tool for assembly interface identification based on assembly process planning. Journal of Engineering, Design and Technology, 23(1), pp. 143-160. ISSN 1726-0531

Bhat, V S; Indiran, T; Selvanathan, S P and Bhat, S (2025) Designing multivariable pi controller with multi-response optimization for a pilot plant binary distillation column: A robust design approach. Journal of Engineering, Design and Technology, 23(1), pp. 207-227. ISSN 1726-0531

Joubert, G D and Raji, A K (2025) Development and validation of a real-time testbed for renewable energy integration studies: South African grid code case study. Journal of Engineering, Design and Technology, 23(1), pp. 1-20. ISSN 1726-0531

Al-Zubaidi, H and Allouzi, R (2025) Flexural behavior of slabs made of lightweight foamed concrete with basalt powder. Journal of Engineering, Design and Technology, 23(1), pp. 249-263. ISSN 1726-0531

Farouk, A M and Rahman, R A (2025) Integrated applications of building information modeling in project cost management: A systematic review. Journal of Engineering, Design and Technology, 23(1), pp. 287-305. ISSN 1726-0531

Swallow, M and Zulu, S L (2025) Investigating the implementation of immersive technologies within on-site construction safety processes. Journal of Engineering, Design and Technology, 23(1), pp. 323-343. ISSN 1726-0531

AlMemari, M; Khalid, K and Osman, A (2025) Job crafting-job embeddedness linkage of construction professionals: Moderating effect of career stages. Journal of Engineering, Design and Technology, 23(1), pp. 108-125. ISSN 1726-0531

Osuizugbo, I C; Onokwai, A O and Faleti, O O (2025) Principal factor analysis of project designers' roles in improving construction projects buildability in Nigeria. Journal of Engineering, Design and Technology, 23(1), pp. 88-107. ISSN 1726-0531

Ojo, L D; Ogunsemi, D R; Elyamany, A and Oke, A E (2025) Profound barriers to value management adoption on construction projects in a developing nation. Journal of Engineering, Design and Technology, 23(1), pp. 264-286. ISSN 1726-0531

Aboneh, A and Mahesh, G (2025) Understanding the key factors of operating environment for small and medium contractors in the developing economies: The case of Ethiopia. Journal of Engineering, Design and Technology, 23(1), pp. 69-87. ISSN 1726-0531

Liu, J; Xu, X and Liu, J (2025) An analysis of BIM-related job requirements based on text mining in China. Journal of Engineering, Design and Technology, 23(1), pp. 126-142. ISSN 1726-0531

Sospeter, N G (2025) A categorization of factors affecting quality of design documentation in Tanzanian construction projects. Journal of Engineering, Design and Technology, 23(1), pp. 228-248. ISSN 1726-0531

Deepa, G; Niranjana, A J and Balu, A S (2025) A hybrid machine learning approach for early cost estimation of pile foundations. Journal of Engineering, Design and Technology, 23(1), pp. 306-322. ISSN 1726-0531

Ayat, M; Qureshi, S M and Kang, C (2025) The moderating role of emerging technologies on the impact of coronavirus disease 2019 and the performance of construction projects: The case of Pakistan. Journal of Engineering, Design and Technology, 23(1), pp. 21-50. ISSN 1726-0531

Keusters, G; Batelaan, F; SleeswijkVisser, F; Houwing, E J and Bakker, H (2025) The potential of the empathic ability for the performance of civil engineering projects. Journal of Engineering, Design and Technology, 23(1), pp. 184-206. ISSN 1726-0531

Nguyen, M V (2025) Assessment of corporate social responsibility performance for Vietnamese construction organizations. Journal of Engineering, Design and Technology, 23(2), pp. 477-500. ISSN 1726-0531

Tambwe, O T; Aigbavboa, C O and Akinradewo, O (2025) Benefits of construction data risks management in the construction industry. Journal of Engineering, Design and Technology, 23(2), pp. 458-476. ISSN 1726-0531

Agbaxode, P D K; Saghatforoush, E and Dlamini, S (2025) Capabilities required of the conventional project delivery (CPD) approach in producing quality design documentation: The Ghanaian construction industry perspective. Journal of Engineering, Design and Technology, 23(2), pp. 682-701. ISSN 1726-0531

Zulu, E; Mutwale, J; Zulu, S L; Musonda, I; Kavishe, N and Moobela, C (2025) Challenges, drivers and incentives to private sector participation in public-private partnership projects in developing countries: Evidence from Zambia. Journal of Engineering, Design and Technology, 23(2), pp. 386-405. ISSN 1726-0531

Adebowale, O J and Agumba, J N (2025) Construction SMEs labour productivity: Causal layered analysis. Journal of Engineering, Design and Technology, 23(2), pp. 501-524. ISSN 1726-0531

Voordijk, H; Vahdatikhaki, F and Hesselink, L (2025) Digital twin–based asset inspection and user–technology interactions. Journal of Engineering, Design and Technology, 23(2), pp. 406-422. ISSN 1726-0531

Edike, U E; Adenuga, O A; Idusuyi, D U and Oke, A A (2025) Effect of curing media on the performance of clay bricks partially stabilised with pulverised cow bone ash. Journal of Engineering, Design and Technology, 23(2), pp. 442-457. ISSN 1726-0531

Egwim, C N; Alaka, H; Pan, Y; Balogun, H; Ajayi, S; Hye, A and Egunjobi, O O (2025) Ensemble of ensembles for fine particulate matter pollution prediction using big data analytics and IoT emission sensors. Journal of Engineering, Design and Technology, 23(2), pp. 640-665. ISSN 1726-0531

Ali, A H; Kineber, A F; Elyamany, A; Hussein Ibrahim, A and Daoud, A O (2025) Exploring stationary and major modular construction challenges in developing countries: A case study of Egypt. Journal of Engineering, Design and Technology, 23(2), pp. 569-598. ISSN 1726-0531

Kulasekara, L B; Perera, B A K S and Perera, H A H P (2025) Impact of smart city system on the construction industry in Sri Lanka. Journal of Engineering, Design and Technology, 23(2), pp. 546-568. ISSN 1726-0531

Zaky, N; Ahmed, M Z; Alarjani, A and Attia, E A (2025) Lean manufacturing implementation in iron and steel industries: Effect of wastes management on the production costs. Journal of Engineering, Design and Technology, 23(2), pp. 525-545. ISSN 1726-0531

Tan, C Y M; Rahman, R A and Lee, Y S (2025) Modelling the well building concepts for office environments: PLS-SEM approach. Journal of Engineering, Design and Technology, 23(2), pp. 618-639. ISSN 1726-0531

Noor, K; Siddiqui, M A and Syed, A I (2025) Optimization of specific energy consumption in cnc turning of a hardened alloy steel roll at low cutting speeds. Journal of Engineering, Design and Technology, 23(2), pp. 368-385. ISSN 1726-0531

Khatib, J; ElKhatib, L; Assaad, J and El Kordi, A (2025) Properties of mortar containing phragmites australis ash. Journal of Engineering, Design and Technology, 23(2), pp. 666-681. ISSN 1726-0531

Park, T; Mahamadu, A M; Agyekum, K; Adade-Boateng, A O; Manu, P; Adinyira, E and Adukpo, S (2025) An inquiry into the health and safety management practices of construction firms in South Korea. Journal of Engineering, Design and Technology, 23(2), pp. 345-367. ISSN 1726-0531

Hussein, K; Akbari, H; Noorossana, R and Yadegari, R (2025) A multi-response optimization approach to mechanical properties improvement of dissimilar resistance spot welding joints. Journal of Engineering, Design and Technology, 23(2), pp. 423-441. ISSN 1726-0531

Ferreira, F; Briga, P; Ramos Teixeira, S and Almeida, F (2025) A platform sandbox for the assessment of municipal sustainable development goals. Journal of Engineering, Design and Technology, 23(2), pp. 599-617. ISSN 1726-0531

Pim-Wusu, M; Simpeh, E K and Simberi, J N N (2025) Ascertaining adequacy of fire suppression systems: The perspective of Accra central of Ghana. Journal of Engineering, Design and Technology, 23(3), pp. 917-934. ISSN 1726-0531

Nguyen, H D; Nguyen, T A; Doan, V V and Dang, C N (2025) Assessing critical barriers and success factors of PPP projects in emerging economies: A case of Vietnam. Journal of Engineering, Design and Technology, 23(3), pp. 792-811. ISSN 1726-0531

Bhangale, K; Joshi, K; Gupta, R and Gardas, B (2025) Assessing project complexity factors for railway megaprojects: A Delphi-BWM approach. Journal of Engineering, Design and Technology, 23(3), pp. 973-997. ISSN 1726-0531

Tantasavasdi, C; Arttamart, S and Inprom, N (2025) Combined wind catchers and side windows for cross ventilation in row houses. Journal of Engineering, Design and Technology, 23(3), pp. 1039-1056. ISSN 1726-0531

Kineber, A F; Oke, A E; Ali, A H; Dosumu, O; Fakunle, K and Olanrewaju, O I (2025) Critical application areas of radio frequency identification (RFID) technology for sustainable construction in developing countries: The case of Nigeria. Journal of Engineering, Design and Technology, 23(3), pp. 895-916. ISSN 1726-0531

Bello, A O; Isa, R B; Afolabi, O P; Arogundade, S and Khan, A A (2025) Drivers for the implementation of circular economy in the Nigerian aeco industry: A structural equation modelling approach. Journal of Engineering, Design and Technology, 23(3), pp. 953-972. ISSN 1726-0531

Bhandiwad, M S; Dodamani, B M and M.D, D (2025) Effect of the drag coefficient on the performance of vertical porous baffles in a sloshing tank. Journal of Engineering, Design and Technology, 23(3), pp. 744-765. ISSN 1726-0531

Elkbuli, M; Azmy, N and Lee, C K (2025) Enhancing project manager communication soft skills and risk management practices in Libyan oil and gas construction projects: The role of experience. Journal of Engineering, Design and Technology, 23(3), pp. 1017-1038. ISSN 1726-0531

Weerasooriya, D; Ranadewa, K A T O and Perera, B A K S (2025) Facilitating the role of quantity surveyors through integration of cyber-physical systems. Journal of Engineering, Design and Technology, 23(3), pp. 871-894. ISSN 1726-0531

Arijeloye, B T (2025) Impact of project risk allocation on PPP housing project delivery in Nigeria: Partial least square structural equation modeling approach. Journal of Engineering, Design and Technology, 23(3), pp. 812-829. ISSN 1726-0531

Osuizugbo, I C; Oshodi, O S; Kukoyi, P O; Yohanna, H S and Edike, U E (2025) Implementation of work-life balance strategies among construction companies in Lagos, Nigeria: Construction workers' perspectives. Journal of Engineering, Design and Technology, 23(3), pp. 998-1016. ISSN 1726-0531

Babalola, I H; Aigbavboa, C O; Aliu, J and Oke, A E (2025) Influence of emotional intelligence attributes on human resource management practices implementation in the Nigerian construction industry. Journal of Engineering, Design and Technology, 23(3), pp. 935-952. ISSN 1726-0531

Bansal, S; Choudhary, L; Kalra, M; Dave, N and Sharma, A K (2025) Mechanical and microstructural characteristics of structural concrete containing rca treated with sodium metasilicate. Journal of Engineering, Design and Technology, 23(3), pp. 854-870. ISSN 1726-0531

Shi, J and Antwi-Afari, M F (2025) Organizational leadership and employee well-being in the construction industry: A bibliometric and scientometric review. Journal of Engineering, Design and Technology, 23(3), pp. 705-724. ISSN 1726-0531

Dahalan, N H; Rahman, R A; Ahmad, S W and Che Ibrahim, C K I (2025) Public monitoring of environmental management plan implementation in road construction projects: Key performance indicators. Journal of Engineering, Design and Technology, 23(3), pp. 766-791. ISSN 1726-0531

David, L O; Nwulu, N I; Aigbavboa, C O and Adepoju, O O (2025) Resource sustainability in the water, energy and food nexus: Role of technological innovation. Journal of Engineering, Design and Technology, 23(3), pp. 725-743. ISSN 1726-0531

Fobiri, G; Musonda, I and Muleya, F (2025) Unlocking the full potential of reality capture for construction project cost monitoring: A mixed review. Journal of Engineering, Design and Technology, 23(3), pp. 830-853. ISSN 1726-0531

Omer, M M; Moyo, T; Alias, A R and Rahman, R A (2025) Development of workplace well-being indexes at construction sites. Journal of Engineering, Design and Technology, 23(4), pp. 1111-1136. ISSN 1726-0531

Shafei, H; Rahman, R A and Lee, Y S (2025) Evaluating Construction 4.0 technologies in enhancing safety and health: case study of a national strategic plan. Journal of Engineering, Design and Technology, 23(4), pp. 1211-1242. ISSN 1726-0531

Lawani, K; Hare, B; Tong, M and Cameron, I (2025) Exploring mental health challenges and implications for construction safety. Journal of Engineering, Design and Technology, 23(4), pp. 1062-1086. ISSN 1726-0531

Lawani, K; Sadeghineko, F; Tong, M and Bayraktar, M (2025) Methodology for retrospectively developing a BIM model from point cloud scans using ongoing building project as case study. Journal of Engineering, Design and Technology, 23(4), pp. 1243-1261. ISSN 1726-0531

Radzi, A R; K.S, A; Alias, A R; Algahtany, M and Rahman, R A (2025) Modeling the factors affecting workplace well-being at construction sites: a cross-regional multigroup analysis. Journal of Engineering, Design and Technology, 23(4), pp. 1087-1110. ISSN 1726-0531

Tymvios, N; Smithwick, J and Behm, M (2025) Re-evaluating falls through skylights in the USA: has anything changed? Journal of Engineering, Design and Technology, 23(4), pp. 1137-1155. ISSN 1726-0531

M.G, S P; K.S, A; Rajendran, S and Sen, K N (2025) The role of psychological contract in enhancing safety climate and safety behavior in the construction industry. Journal of Engineering, Design and Technology, 23(4), pp. 1189-1210. ISSN 1726-0531

Oke, A E; Aliu, J; Ehiosun, L U; Kineber, A F and Stephen, S S (2025) Adoption of distributed ledger technology for construction projects: A study of the challenges in a developing country. Journal of Engineering, Design and Technology, 23(5), pp. 1364-1383. ISSN 1726-0531

Padala, S P S and M Skanda, P (2025) BIM-based multi-objective optimization framework for volumetric analysis of building projects. Journal of Engineering, Design and Technology, 23(5), pp. 1326-1347. ISSN 1726-0531

dos Santos, J B; Macedo Nascimento, P M and Lima, J P (2025) Commuting and its relationship with health and engagement of civil construction workers. Journal of Engineering, Design and Technology, 23(5), pp. 1348-1363. ISSN 1726-0531

Miceli, A; Bevill, G and Simsiriwong, J (2025) Effect of additively manufactured polymeric inserts on impact response of construction safety helmets. Journal of Engineering, Design and Technology, 23(5), pp. 1653-1665. ISSN 1726-0531

Yang, Y; Antwi-Afari, M F; Imran, M and Kong, L (2025) Effects of transformational leadership and organizational climate on project performance in industrial revolution 5.0: A systematic literature review. Journal of Engineering, Design and Technology, 23(5), pp. 1666-1693. ISSN 1726-0531

Caruajulca, P and Khalilzadeh, M (2025) Empowerment and project performance success: The role of leadership and power distance. Journal of Engineering, Design and Technology, 23(5), pp. 1694-1711. ISSN 1726-0531

Bello, A O; Olanrewaju, O I; Gbenga, P O; Khan, A A and Isa, R B (2025) Exploring the barriers to digital twin adoption in the Nigerian construction industry: A structural equation modelling approach. Journal of Engineering, Design and Technology, 23(5), pp. 1541-1572. ISSN 1726-0531

Acheampong, A; Adjei, E K; Adade-Boateng, A O; Kissi, E; Manu, P and Atibila, D W (2025) Exploring the multidimensional challenges in integrating design for safety (dfs) in the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(5), pp. 1483-1500. ISSN 1726-0531

Kirby, M; Rotimi, F E and Naismith, N (2025) Factors for improving productivity in the New Zealand residential construction sector. Journal of Engineering, Design and Technology, 23(5), pp. 1712-1728. ISSN 1726-0531

Balamurali, B; Anand, N; Thomas, M and Chin, C (2025) High-strength geopolymer based engineered cementitious composites (ECC) for sustainable and resilient construction. Journal of Engineering, Design and Technology, 23(5), pp. 1751-1769. ISSN 1726-0531

Saufi, M; Yusof, L M and Rahman, R A (2025) Homebuyer complaints during defect liability period: Critical analysis of individual presumptions, defect discovery and post-rectifications factors. Journal of Engineering, Design and Technology, 23(5), pp. 1619-1652. ISSN 1726-0531

Le, D A; Dang, C N; Le-Hoai, L and Hoang, V Q (2025) Influences of critical success factors on nonprofit outcomes of oda education construction projects: A case of Vietnam. Journal of Engineering, Design and Technology, 23(5), pp. 1423-1446. ISSN 1726-0531

Khalid, M A; Hassan, M U; Ullah, F and Ahmed, K (2025) Integrated building information modeling and blockchain system for decentralized progress payments in construction projects. Journal of Engineering, Design and Technology, 23(5), pp. 1770-1796. ISSN 1726-0531

Otasowie, O K; Clinton, C; Oke, A E and Adekunle, P (2025) Mapping out focus for circular economy business models (cebms) research in construction sector studies: A bibliometric approach. Journal of Engineering, Design and Technology, 23(5), pp. 1404-1422. ISSN 1726-0531

Gharaibeh, L; Eriksson, K and Lantz, B (2025) Quantifying BIM investment value: A systematic review. Journal of Engineering, Design and Technology, 23(5), pp. 1384-1403. ISSN 1726-0531

Palsodkar, M A; Pansare, R; Nagare, M R and Narwane, V (2025) Repurposing product development after COVID-19 by integrating industry 4.0 and agile new product development practices in emerging economies. Journal of Engineering, Design and Technology, 23(5), pp. 1592-1618. ISSN 1726-0531

Alnuaimi, N T; Chatha, K A and Abdallah, S (2025) Role of big data analytics and information processing capabilities in enhancing transparency and accountability in e-procurement applications. Journal of Engineering, Design and Technology, 23(5), pp. 1729-1750. ISSN 1726-0531

Mireku, E K; Kissi, E; Abu, I M A; Acheampong, A and Armah, N K P (2025) Strategies for the development of mental toughness of construction professionals: The case of Ghana. Journal of Engineering, Design and Technology, 23(5), pp. 1447-1462. ISSN 1726-0531

Kukah, A S K; Jin, X; Osei-Kyei, R and Perera, S (2025) Theoretical framework for carbon trading in the built environment. Journal of Engineering, Design and Technology, 23(5), pp. 1573-1591. ISSN 1726-0531

Li, Q; Zhang, Q; Shen, Y and Zhang, X (2025) Uncovering the dynamic decision-making behaviours of multiple stakeholders in the community public infrastructure. Journal of Engineering, Design and Technology, 23(5), pp. 1501-1518. ISSN 1726-0531

Zamani, S H; Rahman, R A; Yusof, L M and Naganathan, H (2025) Well building for developing countries: Critical design criteria for residential buildings in Malaysia. Journal of Engineering, Design and Technology, 23(5), pp. 1519-1540. ISSN 1726-0531

Emere, C E; Clinton, C; Thwala, W D and Akinradewo, O I (2025) A principal component analysis of sustainable building construction features for project delivery in South Africa. Journal of Engineering, Design and Technology, 23(5), pp. 1463-1482. ISSN 1726-0531

Okunola, A; Akanmu, A and Afolabi, A O (2025) Assessment of active back-support exoskeleton for carpentry task: Muscle activity and range of motion. Journal of Engineering, Design and Technology, 23(6), pp. 1797-1814. ISSN 1726-0531

Che Ibrahim, C K I; Manu, P; Cheung, C; Guo, B H W and Agyekum, K (2025) Building a framework for dynamic organisational capabilities in design for safety (dfs) for Malaysian construction organisations. Journal of Engineering, Design and Technology, 23(6), pp. 1958-1978. ISSN 1726-0531

Nguyen, V N; Peansupap, V and Tongthong, T (2025) Complexity measurement framework for change orders in construction projects: Case study of Vietnam. Journal of Engineering, Design and Technology, 23(6), pp. 2082-2104. ISSN 1726-0531

Anugwo, I C; Appau, M W; Simpeh, F and Attakora-Amaniampong, E (2025) Critical drivers of changes in energy-saving behaviours in student housing in Northern Ghana. Journal of Engineering, Design and Technology, 23(6), pp. 2023-2041. ISSN 1726-0531

Paing, K K; Dodanwala, T C and Santoso, D S (2025) Cultural intelligence and cooperation in the construction industry: The mediating role of trust. Journal of Engineering, Design and Technology, 23(6), pp. 1940-1957. ISSN 1726-0531

Acheampong, A; Adjei, E K; Asiedu, R O; Atibila, D W and Abu, I M A (2025) Evaluating the factors influencing artificial intelligence technology uptake in health and safety management within the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(6), pp. 2060-2081. ISSN 1726-0531

Pittri, H; Oduro, S; Atibila, D W; Kwasafo, O K; Abdallah, A and Anteh, E D (2025) Examining the critical barriers to nzebs' implementation in the Ghanaian construction industry. Journal of Engineering, Design and Technology, 23(6), pp. 1898-1918. ISSN 1726-0531

Dandago, A A; Yamusa, M A; Lawal, H S; Abubakar, M; Abdullahi, M and Zailani, B M (2025) Impact of uncertainty factors on the performance of building renovation projects. Journal of Engineering, Design and Technology, 23(6), pp. 1875-1897. ISSN 1726-0531

Özkan-Özen, Y D; Akcicek, C and Ozturkoglu, Y (2025) Machine learning applications in smart logistics: Analysing barriers for future practices. Journal of Engineering, Design and Technology, 23(6), pp. 2105-2123. ISSN 1726-0531

Deshapriya, L A M; Perera, B A K S; Ilangakoon, I W M A D and Weerasooriya, D (2025) Management of adverse effects of construction digitalization on the quantity surveying key roles: A qualitative Delphi study. Journal of Engineering, Design and Technology, 23(6), pp. 1815-1837. ISSN 1726-0531

Infante-Perea, M; Román-Onsalo, M and Navarro-Astor, E (2025) Occupational alternatives in Spanish building engineering: A gender perspective. Journal of Engineering, Design and Technology, 23(6), pp. 2005-2022. ISSN 1726-0531

Appau, M W; Attakora-Amaniampong, E and Quansah, J Y D (2025) Residential student housing mobility and supportive design: A cross-sectional assessment of off-campus all-inclusive university student hostels in Ghana. Journal of Engineering, Design and Technology, 23(6), pp. 1856-1874. ISSN 1726-0531

Wang, M; Shaari, N; Abidin, S Z and He, Y (2025) Service design in the context of sustainable production and consumption: A case study of elderly fall-protection clothing. Journal of Engineering, Design and Technology, 23(6), pp. 1919-1939. ISSN 1726-0531

Wang, P; Haron, N A; Law, T H; Ales@Alias, A H and Qi, Y (2025) Unveiling the mechanisms between project manager leadership competencies and team performance: An empirical study. Journal of Engineering, Design and Technology, 23(6), pp. 1979-2004. ISSN 1726-0531

Chiponde, D B; Gledson, B and Greenwood, D (2025) The impact of project-related failures on team members and support mechanisms: A narrative analysis. Journal of Engineering, Design and Technology, 23(6), pp. 1838-1855. ISSN 1726-0531