Items with Index Term: construction accident

A. Mohy, A.; Bassioni, H. A.; Elgendi, E. O. and Hassan, T. M. (2026) Modeling spatiotemporal hazard dynamics for construction safety using graph attention networks. Journal of Engineering, Design and Technology, ISSN 1726-0531

Abdelhamid, T S and Everett, J G (2000) Identifying root causes of construction accidents. Journal of Construction Engineering and Management, 126(1), pp. 52-60. ISSN 0733-9364

Al-Qalyuby, H A (2005) Inductive learning methodology using OSHA construction accident and citation data. PhD thesis, Wayne State University, USA.

Alhajeri, M (2011) Health and safety in the construction industry: challenges and solutions in the UAE. PhD thesis, Coventry University, UK.

Behm, M (2004) Establishing the link between construction fatalities and disabling injuries and the design for construction safety concept. PhD thesis, Oregon State University, USA.

Behm, M and Schneller, A (2013) Application of the Loughborough construction accident causation model: A framework for organizational learning. Construction Management and Economics, 31(6), pp. 580-595. ISSN 1466433X

Bello, M A (2012) Minimizing impediments to design for construction safety (DFCS) implementation on capital projects. PhD thesis, Carnegie Mellon University, USA.

Bentil, K K (1990) A model approach for predicting commercial construction site accidents. PhD thesis, University of Florida, USA.

Bhagwat, K and Venkata Santosh Kumar, D (2022) A systematic review of construction safety research: Quantitative and qualitative content analysis approach. Built Environment Project and Asset Management, 12(2), pp. 243-261. ISSN 2044-124X

Birgonul, M T; Dikmen, I and Demirel, T (2005) Decision support tool for the quantification of fault rates in construction fall accidents. In: Khosrowshahi, F (ed.) Proceedings of 21st Annual ARCOM Conference, 7-9 September 2005, London, UK.

Boadu, Elijah Frimpong (2022) A framework for promoting health and safety through procurement in the construction industry in developing countries: A case of Ghana. PhD thesis, University of New South Wales, Australia.

Cai, J (2020) Data-driven approach to holistic situational awareness in construction site safety management. PhD thesis, Purdue University, USA.

Cameron, I (1999) A goal setting approach to the practice of safety management in the construction industry: Three case studies. PhD thesis, University of Manchester, UK.

Carvalho, Karla Maria Paiva de (2020) Proposal of a systemic approach model in risk situations in the steel company. PhD thesis, Universidade Estadual de Campinas, Brazil.

Chan, A P C; Yang, Y and Darko, A (2018) Construction accidents in a large-scale public infrastructure project: Severity and prevention. Journal of Construction Engineering and Management, 144(10): 05018010, ISSN 0733-9364

Chan, K C G (2012) The use of virtual reality for visualizing construction safety management process. PhD thesis, Hong Kong Polytechnic University, Hong Kong.

Chen, N; Zhang, Z and Chen, A (2025) Comprehensive evaluation of classification: an empirical study on consequence prediction of construction accidents in China. Construction Innovation, 25(4), pp. 1210-1230. ISSN 1471-4175

Chi, S; Han, S and Kim, D Y (2013) Relationship between unsafe working conditions and workers' behavior and impact of working conditions on injury severity in U.S. Construction industry. Journal of Construction Engineering and Management, 139(7), pp. 826-838. ISSN 0733-9364

Chiang, Y H; Wong, F K W and Liang, S (2018) Fatal construction accidents in Hong Kong. Journal of Construction Engineering and Management, 144(3): 04017121, ISSN 0733-9364

Chinda, Thanwadee (2008) A system dynamics approach to construction safety culture. PhD thesis, Griffith University, Australia.

Cokeham, M and Tutesigensi, A (2013) An investigation of construction accidents in Rwanda: Perspectives from Kigali. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 166(4), pp. 179-187. ISSN 17514312

De Saram, D D and Tang, S L (2005) Pain and suffering costs of persons in construction accidents: Hong Kong experience. Construction Management and Economics, 23(6), pp. 645-658. ISSN 01446193

De Silva, N; Rathnayake, U and Kulasekera, K M U B (2018) Under-reporting of construction accidents in Sri Lanka. Journal of Engineering, Design and Technology, 16(6), pp. 850-868. ISSN 1726-0531

Deng, Y; Liu, Z; Song, L; Ni, G and Xu, N (2024) Exploring the metro construction accidents and causations for improving safety management based on data mining and network theory. Engineering, Construction and Architectural Management, 31(9), pp. 3508-3532. ISSN 0969-9988

Do, Q; Le, T and Le, C (2024) Uncovering critical causes of highway work zone accidents using unsupervised machine learning and social network analysis. Journal of Construction Engineering and Management, 150(3): 04023168, ISSN 0733-9364

Duan, P; Fu, X; Guo, H; Guo, P and Zhou, J (2025) Using graph attention network for causal reasoning of construction safety accidents. Journal of Construction Engineering and Management, 151(11): 04025167, ISSN 0733-9364

Dumrak, J; Mostafa, S; Kamardeen, I and Rameezdeen, R (2013) Factors associated with the severity of construction accidents: The case of South Australia. Construction Economics and Building, 13(4), pp. 32-49. ISSN 2204-9029

Edirisinghe, R and Lingard, H (2016) Exploring the potential for the use of video to communicate safety information to construction workers: Case studies of organizational use. Construction Management and Economics, 34(6), pp. 366-376. ISSN 0144-6193

Farooqui, R U-H (2011) Achieving zero accidents: a strategic framework for continuous safety improvement in the construction industry. PhD thesis, Florida International University, USA.

Fujino, T (1994) The development of a method for investigating construction site accidents using fuzzy fault tree analysis. PhD thesis, Ohio State University, USA.

Gholizadeh, P (2022) Analyzing accidents among specialty contractors: A data mining approach. PhD thesis, George Mason University, USA.

Gholizadeh, P and Esmaeili, B (2020) Cost of occupational incidents for electrical contractors: Comparison using robust-factorial analysis of variance. Journal of Construction Engineering and Management, 146(7): 0001861, ISSN 0733-9364

Gibb, A; Hide, S; Haslam, R; Gyi, D; Pavitt, T; Atkinson, S and Duff, R (2005) Construction tools and equipment: their influence on accident causality. Journal of Engineering, Design and Technology, 3(1), pp. 12-23. ISSN 1726-0531

Gibb, A; Lingard, H; Behm, M and Cooke, T (2014) Construction accident causality: Learning from different countries and differing consequences. Construction Management and Economics, 32(5), pp. 446-459. ISSN 01446193

Golizadeh, Hamed (2019) Adoption of building information modelling innovations to reduce occupational fatalities in the Australian construction industry. PhD thesis, Queensland University of Technology, Australia.

Guo, H; Yu, Y; Ding, Q and Skitmore, M (2018) Image-and-skeleton-based parameterized approach to real-time identification of construction workers' unsafe behaviors. Journal of Construction Engineering and Management, 144(6): 04018042, ISSN 0733-9364

Guo, H; Zhang, Z; Yu, R; Sun, Y and Li, H (2023) Action recognition based on 3D skeleton and LSTM for the monitoring of construction workers' safety harness usage. Journal of Construction Engineering and Management, 149(4): 04023015, ISSN 0733-9364

Guo, S; Zhao, Y; Luoren, Y; Liang, K and Tang, B (2022) Knowledge discovery of correlations between unsafe behaviors within construction accidents. Engineering, Construction and Architectural Management, 29(4), pp. 1797-1816. ISSN 0969-9988

Han, Y; Shen, J; Zhu, X; An, B and Bao, X (2024) Interaction mechanisms of interface management risks in complex systems of high-speed rail construction projects: An association rule mining-based modeling framework. Engineering, Construction and Architectural Management, 31(5), pp. 2101-2127. ISSN 0969-9988

Harvey, E (2019) Rethinking construction safety. PhD thesis, Loughborough University, UK.

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(2), pp. 373-419.

Hide, S (2003) Exploring accident causation in the construction industry. PhD thesis, Loughborough University, UK.

Hinze, J and Bren, D (1996) Analysis of fatalities and injuries due to powerline contacts. Journal of Construction Engineering and Management, 122(2), pp. 177-182. ISSN 0733-9364

Hinze, J; Huang, X and Terry, L (2005) The nature of struck-by accidents. Journal of Construction Engineering and Management, 131(2), pp. 262-268. ISSN 0733-9364

Holland, N and Hinze, J (2000) Daylight savings time changes and construction accidents. Journal of Construction Engineering and Management, 126(5), pp. 404-406. ISSN 0733-9364

Hon, C K H; Chan, A P C and Yam, M C H (2012) Empirical study to investigate the difficulties of implementing safety practices in the repair and maintenance sector in Hong Kong. Journal of Construction Engineering and Management, 138(7), pp. 877-884. ISSN 0733-9364

Hsiao, W T; Yu, W D and Shih, C C (2026) Proactive construction hazard prevention model using machine learning. Journal of Construction Engineering and Management, 152(2): 04025261, ISSN 0733-9364

Irizarry, J; Simonsen, K L and Abraham, D M (2005) Effect of safety and environmental variables on task durations in steel erection. Journal of Construction Engineering and Management, 131(12), pp. 1310-1319. ISSN 0733-9364

Irumba, R (2015) Modelling of construction safety performance and housing markets in Kampala, Uganda. PhD thesis, KTH Royal Institute of Technology, Sweden.

Jiang, W; Ding, L and Zhou, C (2021) Cyber physical system for safety management in smart construction site. Engineering, Construction and Architectural Management, 28(3), pp. 788-808. ISSN 0969-9988

Kang, L (2025) Examining the relationship between construction fatalities and the construction economy in China: A three-decade analysis. Engineering, Construction and Architectural Management, 32(8), pp. 5558-5577. ISSN 0969-9988

Kartam, N A (1997) Integrating safety and health performance into construction CPM. Journal of Construction Engineering and Management, 123(2), pp. 121-126. ISSN 0733-9364

Kazan, E E (2013) Analysis of fatal and nonfatal accidents involving earthmoving equipment operators and on-foot workers. PhD thesis, Wayne State University, USA.

Kazar, G and Comu, S (2021) Effectiveness of serious games for safety training: A mixed method study. Journal of Construction Engineering and Management, 147(8): 04021091, ISSN 0733-9364

Kazar, G and Comu, S (2022) Exploring the relations between the physiological factors and the likelihood of accidents on construction sites. Engineering, Construction and Architectural Management, 29(1), pp. 456-475. ISSN 0969-9988

Khawam, A A (2017) Project manager's role in safety performance of Saudi construction firms: A correlational study. PhD thesis, University of Phoenix, USA.

Kim, J (2022) A multimodal approach to improve fire safety on construction sites. PhD thesis, Oklahoma State University, USA.

Kim, T and Chi, S (2019) Accident case retrieval and analyses: Using natural language processing in the construction industry. Journal of Construction Engineering and Management, 145(3): 04019004, ISSN 0733-9364

Kiral, I A and Demirkesen, S (2023) Assessing the impact of peripheral vision on construction site safety. Engineering, Construction and Architectural Management, 30(9), pp. 4435-4463. ISSN 0969-9988

Koc, K; Ekmekcioğlu, Ö and Gurgun, A P (2023) Prediction of construction accident outcomes based on an imbalanced dataset through integrated resampling techniques and machine learning methods. Engineering, Construction and Architectural Management, 30(9), pp. 4486-4517. ISSN 0969-9988

Koehn, E and Musser, K (1983) OSHA regulations effects on construction. Journal of Construction Engineering and Management, 109(2), pp. 233-244. ISSN 0733-9364

Leung, M-y; Liang, Q and Yu, J (2016) Development of a mindfulness-stress-performance model for construction workers. Construction Management and Economics, 34(2), pp. 110-128. ISSN 0144-6193

Li, X; Yang, X; Feng, K and Liu, C (2025) Automatic monitoring the risk coupling of foundation pits: Integrated point cloud, computer vision and Bayesian networks approach. Engineering, Construction and Architectural Management, 32(9), pp. 6233-6267. ISSN 0969-9988

Li, J; Wang, H; Xie, Y and Zeng, W (2020) Human error identification and analysis for shield machine operation using an adapted tracer method. Journal of Construction Engineering and Management, 146(8): 04020095, ISSN 0733-9364

Lim, T K; Park, S M; Lee, H C and Lee, D E (2016) Artificial neural network-based slip-trip classifier using smart sensor for construction workplace. Journal of Construction Engineering and Management, 142(2): 04015065, ISSN 0733-9364

Luo, X; Li, X; Song, X and Liu, Q (2023) Convolutional neural network algorithm-based novel automatic text classification framework for construction accident reports. Journal of Construction Engineering and Management, 149(12): 04023128, ISSN 0733-9364

Luo, Xiaowei (2013) Requirements, specifications and deployment models for autonomous jobsite safety proximity monitoring. PhD thesis, University of Texas at Austin, USA.

Lyu, P (2025) Assessing the impact of weather conditions on safety in construction environments: Data-driven approaches for learning from accidents. PhD thesis, Arizona State University, USA.

Lyu, S; Hon, C K H; Chan, A P C; Javed, A A; Zhang, R P and Wong, F K W (2020) An exploratory study of safety communication networks of ethnic minority crews in the Hong Kong construction industry. Engineering, Construction and Architectural Management, 28(4), pp. 1156-1175. ISSN 0969-9988

Ma, L; Guo, H and Fang, Y (2021) Analysis of construction workers' safety behavior based on Myers-Briggs type indicator personality test in a bridge construction project. Journal of Construction Engineering and Management, 147(1): 04020149, ISSN 0733-9364

Manase, D (2008) An exploratory study of GIS based analysis of health and safety related information. PhD thesis, University of Wolverhampton, UK.

Manu, P A (2012) An investigation into the accident causal influence of construction project features. PhD thesis, University of Wolverhampton, UK.

Mazlan, E M; Osman, M H and Saud, M S (2019) The level of competency knowledge in safety training among construction personnel. Journal of Construction in Developing Countries, 24(2), pp. 157-172. ISSN 1823-6499

Meng, Q; Zhu, J; Li, Z and Chong, H Y (2024) Clarifying unsafe behaviors of construction workers through a complex network of unsafe behavior chains. Journal of Construction Engineering and Management, 150(11): 04024164, ISSN 0733-9364

Mitropoulos, P; Abdelhamid, T S and Howell, G A (2005) Systems model of construction accident causation. Journal of Construction Engineering and Management, 131(7), pp. 816-825. ISSN 0733-9364

Mohajeri, M; Ardeshir, A and Malekitabar, H (2023) Diagnostic intervention program based on construction workers' internal factors for persistent reduction of unsafe behavior. Engineering, Construction and Architectural Management, 30(2), pp. 478-495. ISSN 0969-9988

Mohajeri, M; Ardeshir, A; Malekitabar, H and Rowlinson, S (2021) Structural model of internal factors influencing the safety behavior of construction workers. Journal of Construction Engineering and Management, 147(11): 04021156, ISSN 0733-9364

Mostafa Adel, E; Elnawawy, O; Ayman Ahmed Ezzat, O and Badawy, M (2021) A framework to activate the health and safety regulations in the Egyptian construction industry. Journal of Engineering, Design and Technology, 19(5), pp. 1158-1191. ISSN 1726-0531

Mostofi, F and Toǧan, V (2023) A data-driven recommendation system for construction safety risk assessment. Journal of Construction Engineering and Management, 149(12): 04023139, ISSN 0733-9364

Mun, H; Jeong, J; Jeong, J and Kumi, L (2025) Statistical hypothesis test approach considering workers' thermal comfort to determine nonworking days in different climate zones. Journal of Construction Engineering and Management, 151(9): 04025116, ISSN 0733-9364

Nguyen, F B T (2024) Quality control of front-end planning for electric power construction: A collaborative process-based approach using systems engineering. PhD thesis, Colorado State University, USA.

Nguyen, T; Do, Q; Le, T and Le, C (2024) Discovering workers' actions leading to severe construction accidents using accident report data and sequence mining techniques. Journal of Construction Engineering and Management, 150(12): 04024172, ISSN 0733-9364

Nguyen, Thinh Tan (2025) Accident data analytics and AI-based auditory enhancement for highway construction safety. PhD thesis, Clemson University, USA.

Paskins, J F (2012) The social experience of building construction work in and around Paris during the 1960s. PhD thesis, University College London, UK.

Patel, D A and Jha, K N (2016) An estimate of fatal accidents in Indian construction. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Peng, L; Man, S S; Chung, H T; Chan, A H S and Zhang, Z (2025) Prospective workers' perceptions of crane operation risks: Using a pairwise comparison. Journal of Construction Engineering and Management, 151(7): 05025001, ISSN 0733-9364

Polmear, M and Simmons, D R (2022) Industry perspective on the role of visualization technology in construction safety training. International Journal of Construction Education and Research, 18(4), pp. 352-373. ISSN 1557-8771

Qiao, J; Wang, C; Guan, S and Shuran, L (2022) Construction-accident narrative classification using shallow and deep learning. Journal of Construction Engineering and Management, 148(9): 04022088, ISSN 0733-9364

Rafieyan, A; Sarvari, H; Beer, M and Chan, D W M (2024) Determining the effective factors leading to incidence of human error accidents in industrial parks construction projects: Results of a fuzzy Delphi survey. International Journal of Construction Management, 24(7), pp. 748-760. ISSN 1562-3599

Rashidi, A; Woon, G L; Dasandara, M; Bazghaleh, M and Pasbakhsh, P (2025) Smart personal protective equipment for intelligent construction safety monitoring. Smart and Sustainable Built Environment, 14(3), pp. 835-858. ISSN 2046-6099

Ray, U.; Arteaga, C.; Ahn, Y. and Park, J. (2026) Enhanced identification of equipment failures from descriptive accident reports using language generative model. Engineering, Construction and Architectural Management, 33(3), pp. 2298-2313. ISSN 0969-9988

Rubio-Romero, J C; Rubio, M C and García-Hernández, C (2013) Analysis of construction equipment safety in temporary work at height. Journal of Construction Engineering and Management, 139(1), pp. 9-14. ISSN 0733-9364

Salarian, A A; Etemadfard, H; Rahimzadegan, A and Ghalehnovi, M (2023) Investigating the role of clustering in construction-accident severity prediction using a heterogeneous and imbalanced data set. Journal of Construction Engineering and Management, 149(2): 04022161, ISSN 0733-9364

Salminen, S (1995) Serious occupational accidents in the construction industry. Construction Management and Economics, 13(4), pp. 299-306. ISSN 01446193

Schmidt, J R (1997) Quantifying the impact of construction accidents using predictive models. PhD thesis, State University of New York at Buffalo, USA.

Shuang, Q; Liu, X; Wang, Z and Xu, X (2024) Automatically categorizing construction accident narratives using the deep-learning model with a class-imbalance treatment technique. Journal of Construction Engineering and Management, 150(9): 04024107, ISSN 0733-9364

Simukonda, W (2019) Occupational health and safety practices among contractors in Malawi: A generic overview. Proceedings of Institution of Civil Engineers: Management, Procurement and Law, 172(3), pp. 118-124. ISSN 17514304

Son, J; Jeong, J; Jeong, J; Kumi, L and Mun, H (2026) Data-driven approach to analyzing factors influencing construction accident severity using shap analysis. Journal of Construction Engineering and Management, 152(3): 04025282, ISSN 0733-9364

Sun, N.; Wang, J. and Liao, P. C. (2026) EEG-based neural mechanisms of confidence and metacognition in construction safety hazard recognition. Journal of Construction Engineering and Management, 152(8): 04026127, ISSN 0733-9364

Sun, C; Ahn, S and Ahn, C R (2020) Identifying workers' safety behavior-related personality by sensing. Journal of Construction Engineering and Management, 146(7): 04020078, ISSN 0733-9364

Sung, W-K (2017) Factors motivating construction safety knowledge sharing in online social media. PhD thesis, University of Hong Kong, Hong Kong.

Suraji, A (2001) Development and validation of a theory of construction accident causation. PhD thesis, University of Manchester, UK.

Suraji, A and Duff, A R (2000) Construction management actions: A stimulant of construction accident causation. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Suraji, A; Duff, A R and Peckitt, S J (2001) Development of causal model of construction accident causation. Journal of Construction Engineering and Management, 127(4), pp. 337-344. ISSN 0733-9364

Suraji, A; Sulaiman, K; Mahyuddin, N and Mohamed, O (2006) Rethinking construction safety: An introduction to total safety management. Journal of Construction Research, 7(1), pp. 49-63. ISSN 1609-9451

Tang, S L; Ying, K C; Chan, W Y and Chan, Y L (2004) Impact of social safety investments on social costs of construction accidents. Construction Management and Economics, 22(9), pp. 937-946. ISSN 01446193

Tayebi, A; Abbasianjahromi, H and Aghakarimi, M (2025) Using a hybrid method to assess the consequence of hazards on the project success factors. Engineering, Construction and Architectural Management, 32(12), pp. 8273-8303. ISSN 0969-9988

Teizer, J (2016) Right-time vs real-time pro-active construction safety and health system architecture. Construction Innovation, 16(3), pp. 253-280. ISSN 1471-4175

Teo, E A L and Feng, Y (2011) Costs of construction accidents to Singapore contractors. International Journal of Construction Management, 11(3), pp. 79-92. ISSN 1562-3599

Toole, T M (2002) Construction site safety roles. Journal of Construction Engineering and Management, 128(3), pp. 203-210. ISSN 0733-9364

Tsang, Y T; Fung, I W H; Tam, V W Y; Sing, C P and Lu, C T (2017) Development of an accident modelling in the Hong Kong construction industry. International Journal of Construction Management, 17(2), pp. 124-131. ISSN 1562-3599

Umar, T (2021) Applications of drones for safety inspection in the gulf cooperation council construction. Engineering, Construction and Architectural Management, 28(9), pp. 2337-2360. ISSN 0969-9988

Umer, W; Li, H; Szeto, G P Y and Wong, A Y L (2018) Proactive safety measures: Quantifying the upright standing stability after sustained rebar tying postures. Journal of Construction Engineering and Management, 144(4): 04018010, ISSN 0733-9364

Usman, W. I.; Mazher, K. M.; Umer, W.; Wuni, I. Y.; Alshibani, A.; Ghaithan, A.; Nasir, A. R. and Mohammed, A. (2026) BIM-based construction accidents knowledge database management system: Centralized accessible information repository for enhanced learning from the past. Journal of Construction Engineering and Management, 152(9): 04026149, ISSN 0733-9364

Wang, D; Xu, G and Fang, S (2026) Data-driven analysis of public concerns in major construction accidents and intervention strategies. Journal of Construction Engineering and Management, 152(6): 04026060, ISSN 0733-9364

Wang, F.; Zhou, J. and Zheng, X. (2026) Identification of hydraulic engineering construction accident causes using instruction tuning and structured prompting in large language models. Journal of Construction Engineering and Management, 152(8): 04026122, ISSN 0733-9364

Wang, Y (2017) Zero incident safety management for continued safety improvement. PhD thesis, Polytechnic Institute of New York University, USA.

Wong, F K W; Chan, A P C; Yam, M C H; Wong, E Y S; Tse, K T C; Yip, K K C and Cheung, E (2009) Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height. Journal of Engineering, Design and Technology, 7(2), pp. 130-142. ISSN 1726-0531

Wong, L; Wang, Y; Law, T and Lo, C T (2016) Association of root causes in fatal fall-from-height construction accidents in Hong Kong. Journal of Construction Engineering and Management, 142(7): 4016018, ISSN 0733-9364

Wu, W; Wen, C; Yuan, Q; Chen, Q and Cao, Y (2025) Construction and application of knowledge graph for construction accidents based on deep learning. Engineering, Construction and Architectural Management, 32(2), pp. 1097-1121. ISSN 0969-9988

Xia, X; Xiang, P; Khanmohammadi, S; Gao, T and Arashpour, M (2024) Predicting safety accident costs in construction projects using ensemble data-driven models. Journal of Construction Engineering and Management, 150(7): 04024054, ISSN 0733-9364

Xie, L.; Yu, Z. and Zhao, X. (2025) Assessing construction safety risks in large urban complex projects: An interval ordinal priority approach. Engineering, Construction and Architectural Management, 33(5), pp. 3996-4018. ISSN 0969-9988

Yan, X and Kim, Y C (2018) A conceptual framework of ITSMCA for a building collapse accident. Engineering, Construction and Architectural Management, 25(6), pp. 721-737. ISSN 0969-9988

Yousef, R A (2015) Toward effective construction safety: Application of morphological analysis to the Arabian Gulf region. PhD thesis, University of Texas at Dallas, USA.

Yu, W D; Wang, K C and Wu, H T (2022) Empirical comparison of learning effectiveness of immersive virtual reality-based safety training for novice and experienced construction workers. Journal of Construction Engineering and Management, 148(9): 04022078, ISSN 0733-9364

Zahoor, H; Chan, A P C; Gao, R and Utama, W P (2017) The factors contributing to construction accidents in Pakistan: Their prioritization using the Delphi technique. Engineering, Construction and Architectural Management, 24(3), pp. 463-485. ISSN 0969-9988

Zahoor, H; Chan, A P C; Masood, R; Choudhry, R M; Javed, A A and Utama, W P (2016) Occupational safety and health performance in the Pakistani construction industry: Stakeholders' perspective. International Journal of Construction Management, 16(3), pp. 209-219. ISSN 1562-3599

Zhang, F (2022) A hybrid structured deep neural network with word2vec for construction accident causes classification. International Journal of Construction Management, 22(6), pp. 1120-1140. ISSN 1562-3599

Zhang, H; Yan, X; Li, H; Jin, R and Fu, H (2019) Real-time alarming, monitoring, and locating for non-hard-hat use in construction. Journal of Construction Engineering and Management, 145(3): 04019006, ISSN 0733-9364

Zhang, R P; Cheung, C M and Lei, H (2019) Applications of visualisation technology in construction safety training: A preliminary review. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Zhang, Z; Guo, H; Li, H and Fang, Y (2025) Agent-based simulation approach to analyzing the impact of construction safety management behaviors on workers' safety behaviors. Journal of Construction Engineering and Management, 151(8): 04025106, ISSN 0733-9364

Zhi, M; Hua, G B; Wang, S Q and Ofori, G (2003) Total factor productivity growth accounting in the construction industry of Singapore. Construction Management and Economics, 21(7), pp. 707-718. ISSN 01446193

Zhou, H.; Xu, M. and Yang, Q. (2026) Quantitative safety risk coupling assessment method based on complex network theory: A case study in super-high-rise building construction. Journal of Construction Engineering and Management, 152(7): 04026095, ISSN 0733-9364

Zhou, J; Zheng, X; Wang, F and Tian, D (2025) Intelligent identification approach for accident causation in hydraulic and hydropower engineering construction. Journal of Construction Engineering and Management, 151(12): 04025195, ISSN 0733-9364

Zolfagharian, S; Irizarry, J; Ressang, A; Nourbakhsh, M and Gheisari, M (2014) Automated safety planning approach for residential construction sites in Malaysia. International Journal of Construction Management, 14(3), pp. 134-147. ISSN 1562-3599

Zou, P X W; Shi, V Y and Li, Z (2010) An econometric evaluation framework for investment in construction safety. In: Egbu, C (ed.) Proceedings of 26th Annual ARCOM Conference, 6-8 September 2010, Leeds, UK.

Zulkeflee, A A; Faisol, N; Ismail, F and Ismail, N A A (2022) Safety compliances enhancement: Foreign labours behaviour in the Malaysian construction site. Journal of Construction in Developing Countries, 27(1), pp. 153-171. ISSN 1823-6499