Items with Subject: fluid mechanics

Abdeen, F N; Gunatilaka, R N; Sepasgozar, S M E and Edwards, D J (2024) The usability of a novel mobile augmented reality application for excavation process considering safety and productivity in construction. Construction Innovation, 24(4), pp. 892-911. ISSN 1471-4175

Adesi, M; Murphy, R and Kehily, D (2019) The strategy process of Irish quantity surveying firms operating within a turbulent business environment. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Al-Hussein, M; Alkass, S and Moselhi, O (2005) Optimization algorithm for selection and on site location of mobile cranes. Journal of Construction Engineering and Management, 131(5), pp. 579-590. ISSN 0733-9364

Alam, M K and Hasan, M D R (2010) Protection works against wave attacks in the haor areas of Bangladesh: Analysis of sustainability. Journal of Construction in Developing Countries, 15(2), pp. 69-85. ISSN 1823-6499

Ali, G M; Kosa, J; Bouferguene, A and Al-Hussein, M (2021) Competitive assessment of ice and frozen silt mat for crane ground support using finite-element analysis. Journal of Construction Engineering and Management, 147(6): 04021038, ISSN 0733-9364

Ali Khan, M S; Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(1), pp. 196-210.

Alnoaimi, Ali D (2021) Development of sustainability assessment framework for sewerage infrastructure projects in the Kingdom of Bahrain. PhD thesis, Griffith University, Australia.

Bai, S; Li, M; Lu, Q; Tian, H and Qin, L (2022) Global time optimization method for dredging construction cycles of trailing suction hopper dredger based on grey system model. Journal of Construction Engineering and Management, 148(2): 04021198, ISSN 0733-9364

Bamgbade, J A; Fung, E S; Moshood, T D; Kamaruddeen, A M and Liew, S (2023) The dynamics of ecological sustainability in housing delivery: Developers' perspectives. Architectural Engineering and Design Management, 19(2), pp. 183-199. ISSN 1745-2007

Bennett, W G and Karunarathna, H (2020) Coastal flood alleviation through management interventions under changing climate conditions. International Journal of Disaster Resilience in the Built Environment, 11(2), pp. 187-203. ISSN 1759-5916

Bhandiwad, M S; Dodamani, B M and M.D, D (2025) Effect of the drag coefficient on the performance of vertical porous baffles in a sloshing tank. Journal of Engineering, Design and Technology, 23(3), pp. 744-765. ISSN 1726-0531

Borba, Maria Lucia Guilherme (2014) Technical-scientific and sociopolitical aspects of urban water management: Stormwater drainage in the city of São Paulo. PhD thesis, Universidade de São Paulo, Brazil.

Božiček, D; Almezeraani, Y and Košir, M (2024) Making sense of LCA results when evaluating multiple building designs: Comparison of interpretation concepts. Building Research & Information, 52(1-2), pp. 129-147. ISSN 0961-3218

Brizendine, A L (1997) Risk based analysis of levees. PhD thesis, West Virginia University, USA.

Burton, C A; Ryan, C; Rismanchi, B and Candy, S (2020) Urban shared energy systems and behaviour change: simulating a common pooled resource problem. Smart and Sustainable Built Environment, 9(1), pp. 17-26. ISSN 2046-6099

Cable, J K; Jaselskis, E J; Walters, R C; Li, L and Bauer, C R (2009) Stringless Portland cement concrete paving. Journal of Construction Engineering and Management, 135(11), pp. 1253-1260. ISSN 0733-9364

Cheah, Charmaine Yi Ting (2017) Development of a methodology to quantify installation damage on geotextile for coastal application. PhD thesis, Queensland University of Technology, Australia.

Chen, Y.; Qiu, W. and Xiao, M. (2026) Influence mechanisms of digital construction organizations' capabilities on performance: Evidence from SEM and fsqca. Engineering, Construction and Architectural Management, 33(4), pp. 2744-2770. ISSN 0969-9988

Cho, Y K; Haas, C T; Sreenivasan, S V and Liapi, K (2004) Position error modeling for automated construction manipulators. Journal of Construction Engineering and Management, 130(1), pp. 50-58. ISSN 0733-9364

Choi, J (2003) Strategic motives underlying M and A transactions in the United States public construction industry. PhD thesis, University of Wisconsin - Madison, USA.

Cummings, S; McDougall, J A and Swaffield, J A (2007) Hydraulic assessment of non-circular-section building drainage. Building Research & Information, 35(3), pp. 316-328. ISSN 0961-3218

Edwards, D; Parn, E A; Sing, M C P and Thwala, W D (2019) Risk of excavators overturning: Determining horizontal centrifugal force when slewing freely suspended loads. Engineering, Construction and Architectural Management, 26(3), pp. 479-498. ISSN 0969-9988

Edwards, D J (1999) A methodology for predicting the total average hourly maintenance cost of tracked hydraulic excavators operating in the UK opencast mining industry. PhD thesis, University of Wolverhampton, UK.

Edwards, D J and Holt, G D (2000) Estivate: A model for calculating excavator productivity and output costs. Engineering, Construction and Architectural Management, 7(1), pp. 52-62. ISSN 0969-9988

Edwards, D J and Holt, G D (2000) Quantifying the cost of plant operators' productivity. Journal of Financial Management of Property and Construction, 5(1-2), pp. 85-92. ISSN 1366-4387

Edwards, D J and Holt, G D (2001) Predicting construction plant maintenance expenditure. Building Research & Information, 29(6), pp. 417-427. ISSN 0961-3218

Edwards, D J; Holt, G D and Harris, F C (1998) Financial management of construction plant: Conceptualising cost prediction. Journal of Financial Management of Property and Construction, 3(2), pp. 59-74. ISSN 1366-4387

Edwards, D J; Holt, G D and Harris, F C (1999) Predicting maintenance expenditure on construction plant: Model development and performance analysis. Journal of Financial Management of Property and Construction, 4(1), pp. 31-46. ISSN 1366-4387

Edwards, D J; Holt, G D and Harris, F C (2000) Estimating life cycle plant maintenance costs. Construction Management and Economics, 18(4), pp. 427-435. ISSN 01446193

Edwards, D J; Holt, G D and Harris, F C (2000) A model for predicting plant maintenance costs. Construction Management and Economics, 18(1), pp. 65-75. ISSN 01446193

Edwards, D J; Holt, G D and Harris, F C (2002) Predicting downtime costs of tracked hydraulic excavators operating in the UK opencast mining industry. Construction Management and Economics, 20(7), pp. 581-591. ISSN 01446193

Edwards, D J; Thorpe, T and Love, P (2004) Financial implications of poorly utilised construction plant and equipment. Journal of Financial Management of Property and Construction, 9(1), pp. 3-12. ISSN 1366-4387

Edwards, D J and Yisa, S (2001) Modelling the magnitude of plant downtime: A tool for improving plant operations management. Engineering, Construction and Architectural Management, 8(3), pp. 225-232. ISSN 0969-9988

Egger, C S (2015) Sewer rehabilitation planning under uncertainty. PhD thesis, ETH Zürich, Switzerland.

Eid, M E M (2004) Rethinking relationships in the construction industry: integrating sustainable development into project management processes. PhD thesis, University of Edinburgh, UK.

Ekanayake, E M A C; Shen, G and Kumaraswamy, M M (2021) Critical capabilities of improving supply chain resilience in industrialized construction in Hong Kong. Engineering, Construction and Architectural Management, 28(10), pp. 3236-3260. ISSN 0969-9988

Elazouni, A M and Basha, I M (1996) Evaluating the performance of construction equipment operators in Egypt. Journal of Construction Engineering and Management, 122(2), pp. 109-114. ISSN 0733-9364

Fallahtafti, R and Mahdavinejad, M (2021) Window geometry impact on a room's wind comfort. Engineering, Construction and Architectural Management, 28(9), pp. 2381-2410. ISSN 0969-9988

Fan, R Y C; Ng, S T and Wong, J M W (2010) Reliability of the Box-Jenkins model for forecasting construction demand covering times of economic austerity. Construction Management and Economics, 28(3), pp. 241-254. ISSN 1466433X

Farzin, A; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Economic optimization of heat exchanger networks based on geometric parameters using hybrid genetic-particle swarm algorithm technique. Journal of Engineering, Design and Technology, 19(4), pp. 989-1015. ISSN 1726-0531

Fenis, S M; Diekmann, J E and Huang, P Y (1995) A GIS-based pipeline planning system. Engineering, Construction and Architectural Management, 2(3), pp. 227-238. ISSN 0969-9988

Garg, H C (2012) Theoretical modeling of orifice compensated symmetric hole-entry hybrid journal bearings. Journal of Engineering, Design and Technology, 10(3), pp. 421-435. ISSN 1726-0531

Ghosh, S; Kochhar, K; Sharma, A; Kaushal, S; Agrawal, J; Garg, A; Kumar, A and Dugar, Y (2016) Investigating structure generated turbulence using an unmanned aerial vehicle: A prelude to optimal ventilation strategies in India's upcoming smart cities. Smart and Sustainable Built Environment, 5(4), pp. 372-392. ISSN 2046-6099

Gibson, D L (2022) Best practices for executing high-risk construction projects. DBA thesis, University of Maryland University College, USA.

Gilmour, T; Wiesel, I; Pinnegar, S and Loosemore, M (2010) Social infrastructure partnerships: A firm rock in a storm? Journal of Financial Management of Property and Construction, 15(3), pp. 247-259. ISSN 1366-4387

Goncalves, Gustavo Henrique Vital (2022) Scenarios and support system for consortium management of construction waste applied to water resources management unit 12. PhD thesis, Universidade Federal de São Carlos, Brazil.

Gormley, M and Campbell, D P (2006) Modelling water reduction effects: Method and implications for horizontal drainage. Building Research & Information, 34(2), pp. 131-144. ISSN 0961-3218

Graca, Moacyr Eduardo Alves da (1985) Formulation of a model for evaluation of the determinant conditions for secondary vent need in buildings' drainage systems. PhD thesis, Universidade de São Paulo, Brazil.

Greene, I; Lokuge, W and Karunasena, W (2020) Structural design of floodways under extreme flood loading. International Journal of Disaster Resilience in the Built Environment, 11(4), pp. 535-555. ISSN 1759-5916

Grimm, Alec G (2023) Modeling and monitoring construction site sediment control measures to improve design, performance, and longevity. PhD thesis, Ohio State University, USA.

Grist, E (2014) The implementation of innovative and sustainable construction materials. EngD thesis, University of Bath, UK.

Guo, Z; Xu, X; Gao, X; Xu, Y; Liu, J; Zhang, M and Li, F (2025) Enhanced risk-based quality control for hydraulic engineering construction projects considering the risk-influencing mechanism. Journal of Construction Engineering and Management, 151(2): 04024204, ISSN 0733-9364

Hegab, M Y and Smith, G R (2007) Delay time analysis in microtunneling projects. Journal of Construction Engineering and Management, 133(2), pp. 191-195. ISSN 0733-9364

Hesse, K A (2006) Development of information communication technologies in construction project management: The relationship between theory and technology and its application to the construction industry, including a retrospective on the development of technology that demonstrates how theory was altered and how practice was influenced. PhD thesis, University College London, UK.

Hughes, P J; O’Connor, J T and Traver, A E (1989) Pipe manipulator enhancements for increased automation. Journal of Construction Engineering and Management, 115(3), pp. 412-423. ISSN 0733-9364

Hulio, Z H; Yousufzai, G and Jiang, W (2021) Statistical analysis of wind resource and energy potential assessment of quaidabad site, sindh Pakistan. Journal of Engineering, Design and Technology, 19(6), pp. 1291-1316. ISSN 1726-0531

Huong, H T L and Dzung, L H (2020) Criteria for flood warning levels in Vietnam. International Journal of Disaster Resilience in the Built Environment, 11(5), pp. 645-658. ISSN 1759-5916

Inan Gunaydin, T (2022) Wind flow on and around u-shaped buildings. Journal of Engineering, Design and Technology, 20(3), pp. 841-859. ISSN 1726-0531

Jackson, F (2006) Biodegradable hydraulic fluids: Reducing oil-related pollution in the construction industry. PhD thesis, Nottingham Trent University, UK.

Jirandeh, R R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: a novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Kalainesan, S (2007) Best management practices for highway construction site sedimentation basins. PhD thesis, University of Pittsburgh, USA.

Kale, S and Arditi, D (1998) Business failures: Liabilities of newness, adolescence, and smallness. Journal of Construction Engineering and Management, 124(6), pp. 458-464. ISSN 0733-9364

Kazemi, Hamidreza (2014) Evaluating the effectiveness and hydrological performance of green infrastructure stormwater control measures. PhD thesis, University of Louisville, USA.

Kimura, N; Tai, A and Hashimoto, A (2017) Flood caused by driftwood accumulation at a bridge. International Journal of Disaster Resilience in the Built Environment, 8(5), pp. 466-477. ISSN 1759-5916

Koch, C and Gottlieb, S (2003) Consulting engineering under Europeanization: Denmark-based professional service firms in turbulence. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Kranz, C N (2021) Optimizing compost incorporation for stormwater infiltration, runoff quality, and vegetation establishment in post-construction soils. PhD thesis, North Carolina State University, USA.

Kulkarni, S; Chapman, C; Shah, H; Parn, E A and Edwards, D J (2018) Designing an efficient tidal turbine blade through bio-mimicry: A systematic review. Journal of Engineering, Design and Technology, 16(1), pp. 101-124.

Kulkarni, S S; Chapman, C; Shah, H and Edwards, D J (2018) A computational design method for bio-mimicked horizontal axis tidal turbines. International Journal of Building Pathology and Adaptation, 36(2), pp. 188-209. ISSN 23984708

Lee, E B; Roesler, J; Harvey, J T and Ibbs, C W (2002) Case study of urban concrete pavement reconstruction on Interstate 10. Journal of Construction Engineering and Management, 128(1), pp. 49-56. ISSN 0733-9364

Li, L; Cheng, M; Tu, K; Ding, R; Zhang, J and Xu, B (2025) Human-machine interface based on constraint velocity polytope for safe and efficient operation of large-size hydraulic manipulator. Journal of Construction Engineering and Management, 151(7): 04025082, ISSN 0733-9364

Li, T; Li, Z and Cai, J (2024) Antecedents and consequence of intra-organizational diffusion of prefabricated construction technology: A contingency theory perspective. Engineering, Construction and Architectural Management, 31(7), pp. 2932-2951. ISSN 0969-9988

Liu, J; Love, P E D; Sing, M C P; Carey, B and Matthews, J (2015) Modeling Australia's construction workforce demand: Empirical study with a global economic perspective. Journal of Construction Engineering and Management, 141(4): 05014019, ISSN 0733-9364

Locicero, Ryan Charles Robert (2015) Mainstreaming green infrastructure: The nexus of infrastructure and education using the green space based learning (gsbl) approach for bioretention plant selection. PhD thesis, University of South Florida, USA.

Lucke, T and Beecham, S (2011) Field investigation of clogging in a permeable pavement system. Building Research & Information, 39(6), pp. 603-615. ISSN 0961-3218

Lucke, T; Beecham, S and Qu, Y Y (2016) Estimating flow rates through individual outlets of siphonic roof drainage systems. Building Research & Information, 44(3), pp. 289-300. ISSN 0961-3218

Lv, Y; Feng, J; Wang, G and Li, H (2024) Stability characteristics and experiment of hydraulic drive four-wheel chassis. Journal of Engineering, Design and Technology, 22(2), pp. 598-612. ISSN 1726-0531

Mahdizadeh, H and Nor Mariah, A (2021) Numerical study of heat transfer in 90° bend tube by ai₂o₃ nano fluids using fluid injection. Journal of Engineering, Design and Technology, 19(1), pp. 127-148. ISSN 1726-0531

Majdalani, J G (2010) Management, operation, and maintenance of wastewater systems. DE thesis, Lamar University - Beaumont, USA.

Malhotra, M; Sahu, V; Srivastava, A and Misra, A K (2020) Experimental and numerical investigation of the effect of pre-existing utility tunnel on the bearing capacity of shallow footing in sandy soils. Journal of Engineering, Design and Technology, 18(3), pp. 513-529. ISSN 1726-0531

Manu, E; Ankrah, N A; Chinyio, E and Proverbs, D G (2012) Influence of the macro-economy on trust in construction supply chain chains. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Marti, P; Trümpi, S and Heinzmann, D (2009) Hydraulic joint for pipe jacking. Journal of Construction Engineering and Management, 135(6), pp. 439-447. ISSN 0733-9364

Massoudi, A R (1995) Utilization of plant condition monitoring with reference to the Iranian construction industry. PhD thesis, Swansea University, UK.

McEvoy, M and Southall, R (2010) A programme of testing to evaluate a passive approach to whole-house ventilation. Construction Innovation, 10(4), pp. 395-407. ISSN 1471-4175

McLean, M (2014) A longitudinal analysis of a partial mediation model of employee engagement in a knowledge-intensive firm. PhD thesis, Nottingham Trent University, UK.

Mecca, S (1999) A model of construction planning procedure according to contingency theory. In: Hughes, W (ed.) Proceedings of 15th Annual ARCOM Conference, 15-17 September 1999, Liverpool, UK.

Merdinger, C J (1949) A history of civil engineering. PhD thesis, University of Oxford, UK.

Mohandes, S R; Kaddoura, K; Singh, A K; Elsayed, M Y; Banihashemi, S; Antwi-Afari, M F; Olawumi, T O and Zayed, T (2025) Application of a hybrid fuzzy-based algorithm to investigate the environmental impact of sewer overflow. Smart and Sustainable Built Environment, 14(6), pp. 1950-1990. ISSN 2046-6099

Moon, S and Bernold, L E (1998) Graphic-based human-machine interface for construction manipulator control. Journal of Construction Engineering and Management, 124(4), pp. 305-314. ISSN 0733-9364

Moyanga, Dorcas Titilayo; Ojo, Lekan Damilola and Ogunsemi, Deji Rufus (2026) Prioritizing strategies for surviving economic turbulence: Case of quantity surveying consultancy organizations in Nigeria. Journal of Construction Business and Management, 8(2), pp. 15-27. ISSN 2521-0165

Msomi, V and Oliver, G J (2016) Smart morphing based on shape memory alloy plate. Journal of Engineering, Design and Technology, 14(3), pp. 475-488.

Myrvang, R and Liu, C Y A (2025) Beyond traditional methods: Enhancing cost escalation forecasting in commercial construction amid economic turbulence. Journal of Construction Engineering and Management, 151(2): 04024201, ISSN 0733-9364

Nardecchia, F; Mattoni, B; Burattini, C and Bisegna, F (2020) The impact of humidity on vortex creation around isolated buildings. Building Research & Information, 48(5), pp. 551-571. ISSN 0961-3218

Nielsen, Y and Özbay, F O (2000) Information flow models for large scale public projects. In: Akintoye, A (ed.) Proceedings of 16th Annual ARCOM Conference, 6-8 September 2000, Glasgow, UK.

Olajide, J F; Ajayi, O O; Kudirat Ibilola, Z and Adenuga, O A (2021) Climatic conditions and the resilience of buildings along Lagos coastline. Built Environment Project and Asset Management, 11(4), pp. 738-749. ISSN 2044-124X

Oloke, D (2003) Development of a web-based off-highway plant information system. PhD thesis, University of Wolverhampton, UK.

Ostovar, M (2023) Environmental and social life cycle assessment (LCA) in transport infrastructure. PhD thesis, University of California, Davis, USA.

Paik, S M; Leviakangas, P and Choi, J (2022) Making most of BIM in design: Analysis of the importance of design coordination. International Journal of Construction Management, 22(12), pp. 2225-2233. ISSN 1562-3599

Painting, N J; Piroozfar, P A E and Farr, E R P (2014) Refurbishment of higher education premises: Stakeholder engagement in the process and product. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Paliari, José Carlos (2008) Method for the prognosis of productivity and the unitary consumption of materials: Hydraulic building systems. PhD thesis, Universidade de São Paulo, Brazil.

Pham Vu Hong, S and Nguyen Thanh, V (2023) Application of artificial intelligence algorithm to optimize the design of water distribution system. International Journal of Construction Management, 23(16), pp. 2830-2840. ISSN 1562-3599

Pogorelskiy, S (2024) BIM-based methods for optimizing the design and maintenance of telecommunications infrastructure in data centres. PhD thesis, Debreceni Egyetem, Hungary.

Pries, F and Janszen, F (1995) Innovation in the construction industry: The dominant role of the environment. Construction Management and Economics, 13(1), pp. 43-51. ISSN 01446193

Pushpakumara, B H J and Thusitha, G A (2021) Development of a structural health monitoring tool for underwater concrete structures. Journal of Construction Engineering and Management, 147(10): 04021135, ISSN 0733-9364

Pérez, Z G (2005) Appropriate designs and appropriating irrigation systems : Irrigation infrastructure development and users' management capability in Bolivia. PhD thesis, Wageningen University and Research, Netherlands.

Qi, J K; Yang, J Y; Oliver Hoon Leh, L; Edwards, R and Jamalunlaili, A (2021) Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD. Smart and Sustainable Built Environment, 10(1), pp. 18-36. ISSN 2046-6099

Radebe, T B; Huan, Z and Baloyi, J (2021) Simulation of eutectic plates in medium refrigerated transport. Journal of Engineering, Design and Technology, 19(1), pp. 62-80. ISSN 1726-0531

Raduenz, Henrique (2022) On machine learning-based control for energy management in construction machines. PhD thesis, Universidade Federal de Santa Catarina, Brazil.

Ramezanpour Jirandeh, R; Ghazi, M; Sotoodeh, A F and Nikian, M (2021) Plate-fin heat exchanger network modeling, design and optimization: A novel and comprehensive algorithm. Journal of Engineering, Design and Technology, 19(5), pp. 1017-1043. ISSN 1726-0531

Rihani, R A (2006) An investigation of critical success factors for robotic masonry. PhD thesis, North Carolina State University, USA.

Ryu, S R; Rhee, K N; Yeo, M S and Kim, K W (2008) Strategies for flow rate balancing in radiant floor heating systems. Building Research & Information, 36(6), pp. 625-637. ISSN 0961-3218

Sandy, T (2018) High-accuracy mobile manipulation for on-site robotic building construction. DSc thesis, ETH Zürich, Switzerland.

Schexnayder, C J and David, S A (2002) Past and future of construction equipment: part iv. Journal of Construction Engineering and Management, 128(4), pp. 279-286. ISSN 0733-9364

Schmidt, J Q (2024) Overcoming barriers to adoption of smart stormwater technologies. PhD thesis, University of Michigan, USA.

Schweber, L. and Green, M. (2026) Negotiating net-zero carbon: An ant analysis of two buildings. Buildings & Cities, 7(1), pp. 791-807. ISSN 2632-6655

Shadid, W K (2018) A framework for managing organizations in complex environments. Construction Management and Economics, 36(4), pp. 182-202. ISSN 01446193

Shah, D D; Jain, S K and Prybella, R W (1993) Performance of remotely controlled fiberglass pipe jacking system. Journal of Construction Engineering and Management, 119(4), pp. 832-851. ISSN 0733-9364

Shaurette, M (2015) Higher hourly cost compensation for heavy equipment used in demolition activity. International Journal of Construction Education and Research, 11(4), pp. 280-291. ISSN 1557-8771

Snyder, J R; Stephenson, L C; Mackie, J E and Smith, S D (2016) Agent-based modelling and the byzantine: Understanding the construction of antiquity's largest infrastructure project. In: Chan, P W and Neilson, C J (eds.) Proceedings of 32nd Annual ARCOM Conference, 5-7 September 2016, Manchester, UK.

Sonawan, H; Sofia, E and Ramadhan, A (2022) Assessment of direct evaporative cooler performance with a cooling pad made from banana midrib and ramie fiber. Smart and Sustainable Built Environment, 11(3), pp. 469-482. ISSN 2046-6099

Song, S H; Choi, J O and Cho, H (2024) Transportation-induced impact on a prefinished volumetric modular house using trailer bogie: Case study. Journal of Construction Engineering and Management, 150(7): 05024007, ISSN 0733-9364

Sousa, Rita dos Santos (2019) Production planning and control methodology for soil bioengineering works. PhD thesis, Universidade Federal de Santa Maria, Brazil.

Stanic, N (2016) Assessment methods for structural and hydraulic properties of concrete sewer pipes. PhD thesis, Delft University of Technology, Netherlands.

Sun, Q; He, L; Ding, F; Chen, X; Ding, L and Tu, Y (2021) Modeling and analysis of structure parameters on the lifting force for power catwalk. Journal of Engineering, Design and Technology, 19(1), pp. 187-202. ISSN 1726-0531

Sutrisna, M; Pellicer, E; Torres-Machi, C and Picornell, M (2020) Exploring earned value management in the Spanish construction industry as a pathway to competitive advantage. International Journal of Construction Management, 20(1), pp. 1-12. ISSN 1562-3599

Swaffield, J A (1980) Building drainage system research: Past influences, current efforts and future objectives. Construction Papers, 1(1), pp. 45-61. ISSN 0144-8587

Tansey, P and Spillane, J (2018) Vistas of strategy-making within Northern Ireland construction firms: How sme's differ from large firms. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Tansey, P and Spillane, J P (2014) Government influence on the construction industry during the economic recession 2007-2013. In: Raiden, A and Aboagye-Nimo, E (eds.) Proceedings of 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.

Tatum, C B; Vorster, M and Klingler, M (2006) Innovations in earthmoving equipment: New forms and their evolution. Journal of Construction Engineering and Management, 132(9), pp. 987-997. ISSN 0733-9364

Taylor, D D J (2018) Tools for managing intermittent water supplies. PhD thesis, Massachusetts Institute of Technology, USA.

Tian, D; Li, M; Han, S and Shen, Y (2022) A novel and intelligent safety-hazard classification method with syntactic and semantic features for large-scale construction projects. Journal of Construction Engineering and Management, 148(10): 04022109, ISSN 0733-9364

Tian, D; Liu, H; Chen, S; Li, M and Liu, C (2022) Human error analysis for hydraulic engineering: Comprehensive system to reveal accident evolution process with text knowledge. Journal of Construction Engineering and Management, 148(9): 04022093, ISSN 0733-9364

Tokarczyk, J A (2011) An examination of strategic challenges and opportunities in the wood-based building product industry. PhD thesis, Oregon State University, USA.

Tong, M K L; Akintoye, A; Kelly, J and Tookey, J (2003) Understanding construction supply chain relationships: An aetiological approach. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Tran, T X M; Malano, H M and Thompson, R G (2003) Application of the analytic hierarchy process to prioritise irrigation asset renewals: The case of the la khe irrigation scheme, Vietnam. Engineering, Construction and Architectural Management, 10(6), pp. 382-390. ISSN 0969-9988

Tryggestad, K; Hugosson, M and Søberg, P (2018) Managing risk and uncertainty in sustainable construction innovation: The role of the partnering contract. In: Gorse, C and Neilson, C J (eds.) Proceedings of 34th Annual ARCOM Conference, 3-5 September 2018, Queen’s University, Belfast, UK.

Ugwuoke, A A (2018) Innovation persistence during economic crisis by Nigeria's construction contracting firms: an investigation of the critical success factors. PhD thesis, University of Salford, UK.

Van Bohemen, H D (2004) Ecological engineering and civil engineering works. PhD thesis, Delft University of Technology, Netherlands.

Van Noortwijk, J M (1996) Optimal maintenance decisions for hydraulic structures under isotropic deterioration. PhD thesis, Delft University of Technology, Netherlands.

Vinodh, S; Kamala, V and Jayakrishna, K (2015) Application of fuzzy axiomatic design methodology for selection of design alternatives. Journal of Engineering, Design and Technology, 13(1), pp. 2-22.

Wahalathantri, B; Lokuge, W; Karunasena, W and Setunge, S (2018) Quantitative assessment of flood discharges and floodway failures through cross-cultivation of advancement in knowledge and traditional practices. International Journal of Disaster Resilience in the Built Environment, 9(4-5), pp. 435-456. ISSN 1759-5916

Wang, F.; Zhou, J. and Zheng, X. (2026) Identification of hydraulic engineering construction accident causes using instruction tuning and structured prompting in large language models. Journal of Construction Engineering and Management, 152(8): 04026122, ISSN 0733-9364

Wang, S; Zhu, S and Yuen, P L (2021) Assessment of ground-borne vibration impact on nearby underground facilities induced by ground surface excavation. Journal of Construction Engineering and Management, 147(7): 04021071, ISSN 0733-9364

Wild, A (2004) Re-interpreting the building industry communications research project. Construction Management and Economics, 22(3), pp. 303-310. ISSN 01446193

Wild, S (1996) Observations on the use of ground waste clay brick as a cement replacement material. Building Research & Information, 24(1), pp. 35-40. ISSN 0961-3218

Wong, K C (2021) Factors affecting behavior of roadside construction workers in using personal protective equipment against dust and noise. PhD thesis, University of Hong Kong, Hong Kong.

Wong, M K (2006) A study of capacity predictions for driven piles by dynamic pile testing. PhD thesis, University of Hong Kong, Hong Kong.

Wong, P S P and Lam, K Y (2012) Facing turbulence: Driving force for construction organizations to regain unlearning and learning traction. Journal of Construction Engineering and Management, 138(10), pp. 1202-1211. ISSN 0733-9364

Wright, G B and Jack, L B (2013) Property-level stormwater drainage systems: Integrated flow simulation and whole-life costs. Building Research & Information, 41(2), pp. 223-236. ISSN 0961-3218

Wurthmann, K A (2023) Designing photovoltaic arrays for groundwater pumping for remote agriculture using synthetically generated daily rainfall and irrigation needs. Journal of Engineering, Design and Technology, 21(6), pp. 1803-1826. ISSN 1726-0531

Zarghami, S A and Gunawan, I (2020) A domain-specific measure of centrality for water distribution networks. Engineering, Construction and Architectural Management, 27(2), pp. 341-355. ISSN 0969-9988

Zarghami, S A and Gunawan, I (2021) The emergence and evolution of reliability theory for water distribution networks. Built Environment Project and Asset Management, 11(2), pp. 251-265. ISSN 2044-124X

Zhang, Y (2009) Research on hydraulic engineering construction management decision support system based on network analysis method (in Chinese). PhD thesis, Beijing University of Aeronautics and Astronautics, China.

Zhou, Y; Liang, H; Foo, Z L; Koh, Y Z and Yeoh, J K W (2026) Audio-based excavator preoperational checks using few-shot deep learning. Journal of Construction Engineering and Management, 152(1): 04025212, ISSN 0733-9364

Zhou, J; Zheng, X; Wang, F and Tian, D (2025) Intelligent identification approach for accident causation in hydraulic and hydropower engineering construction. Journal of Construction Engineering and Management, 151(12): 04025195, ISSN 0733-9364

d'Apolito, L and Hong, H (2020) Forklift truck performance simulation and fuel consumption estimation. Journal of Engineering, Design and Technology, 18(3), pp. 689-703. ISSN 1726-0531