Items with Index Term: integrated approach

Adebimpe, O A; Proverbs, D G and Oladokun, V O (2021) A fuzzy-analytic hierarchy process approach for measuring flood resilience at the individual property level. International Journal of Building Pathology and Adaptation, 39(2), pp. 197-217. ISSN 23984708

Adshead, J (2009) An integrated approach to water protection and management: The European Union model. International Journal of Law in the Built Environment, 1(3), pp. 234-243. ISSN 1756-1450

Ahuja, R; Sawhney, A and Arif, M (2018) Developing organizational capabilities to deliver lean and green project outcomes using BIM. Engineering, Construction and Architectural Management, 25(10), pp. 1255-1276. ISSN 0969-9988

Al Hashmi, E (2016) Fire engineering in sustainable buildings: an evaluation for the application of performance-based design in Abu Dhabi. PhD thesis, University of Central Lancashire, UK.

Al-Gahtani, K; Alsugair, A; Alsanabani, N; Alabduljabbar, A and Almutairi, B (2024) Forecasting delay-time model for Saudi construction projects using DEMATEL–sd technique. International Journal of Construction Management, 24(11), pp. 1225-1239. ISSN 1562-3599

Al-Yami, A M H (2008) An integrated approach to value management and sustainable construction during strategic briefing in Saudi construction projects. PhD thesis, Loughborough University, UK.

Alavipour, S M R and Arditi, D (2019) Maximizing expected contractor profit using an integrated model. Engineering, Construction and Architectural Management, 26(1), pp. 118-138. ISSN 0969-9988

Ali, F; Chowdary, B V and Gonzales, L (2013) An integrated design approach for rapid product development: A case study through application of reverse engineering, re-engineering and fast prototyping tools. Journal of Engineering, Design and Technology, 11(2), pp. 178-189. ISSN 1726-0531

Almatroushi, H; Hariga, M; As'ad, R and Al-Bar, A (2020) The multi resource leveling and materials procurement problem: An integrated approach. Engineering, Construction and Architectural Management, 27(9), pp. 2135-2161. ISSN 0969-9988

Alnsour, M A M (2020) Integrating sustainability assessment into public works development in Jordan. PhD thesis, University of Leeds, UK.

Alvand, A; Mirhosseini, S M; Ehsanifar, M; Zeighami, E and Mohammadi, A (2023) Identification and assessment of risk in construction projects using the integrated FMEA-swara-waspas model under fuzzy environment: A case study of a construction project in Iran. International Journal of Construction Management, 23(3), pp. 392-404. ISSN 1562-3599

Asadi, E (2020) Risk-informed multi-criteria decision framework for resilience and sustainability assessment of building structures. PhD thesis, Case Western Reserve University, USA.

Assaad, R; El-Adaway, I H and Abotaleb, I S (2020) Predicting project performance in the construction industry. Journal of Construction Engineering and Management, 146(5): 04020030, ISSN 0733-9364

Ayman Anwar, R (2022) Enhancing the integration of sustainability assessment within dynamic BIM enabled design projects. PhD thesis, Northumbria University, UK.

Aziz, Z; Qasim, R M and Wajdi, S (2017) Improving productivity of road surfacing operations using value stream mapping and discrete event simulation. Construction Innovation, 17(3), pp. 294-323. ISSN 1471-4175

Balasubramanian, S (2017) Green supply chain management: an investigation on the construction sector. PhD thesis, Middlesex University, UK.

Balgheeth, Y (2016) Enhancing existing health and safety processes in public sector construction projects within Saudi Arabia using building information modelling approaches. PhD thesis, University of Salford, UK.

Bastos, J; Batterman, S A and Freire, F (2016) Significance of mobility in the life-cycle assessment of buildings. Building Research & Information, 44(4), pp. 376-393. ISSN 0961-3218

Belhadj, T A (1989) Computer aided architectural evaluation and design: a cost modelling experiment. PhD thesis, University of Sheffield, UK.

Beliveau, Y J (1984) A cost control model for on-site work activities for construction (estimating, cost-codes, forms). PhD thesis, Purdue University, USA.

Birgonul, M T; Dikmen, I and Bektas, S (2015) Integrated approach to overcome shortcomings in current delay analysis practices. Journal of Construction Engineering and Management, 141(4): 04014088, ISSN 0733-9364

Boissonneault, A and Peters, T (2023) Concepts of performance in post-occupancy evaluation post-probe: A literature review. Building Research & Information, 51(4), pp. 369-391. ISSN 0961-3218

Bonilla, M; Castelblanco, G and Rasdorf, W (2026) The paradox of project performance: The role of procurement, contextual, and contractor-related factors. Journal of Construction Engineering and Management, 152(6): 04026062, ISSN 0733-9364

Bosher, L; Dainty, A; Carrillo, P; Glass, J and Price, A (2007) Integrating disaster risk management into construction: A UK perspective. Building Research & Information, 35(2), pp. 163-177. ISSN 0961-3218

Bouchlaghem, D; Shang, H; Anumba, C J; Cen, M; Miles, J and Taylor, M (2005) ICT-enabled collaborative working environment for concurrent conceptual design. Architectural Engineering and Design Management, 1(4), pp. 261-280. ISSN 1745-2007

Boyacioglu, S E; Greenwood, D; Rogage, K; Gledson, B; Parry, A and Hinds, M (2022) Developing an improved process model for forensic analysis of construction project delays. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 38th Annual ARCOM Conference, 5-7 September 2022, Glasgow Caledonian University, Glasgow, UK.

Boyd, P and Harding, D (2025) Generative AI: reconfiguring supervision and doctoral research. Buildings & Cities, 6(1), pp. 294-309. ISSN 2632-6655

Castelblanco, G; Fenoaltea, E M; De Marco, A; Demagistris, P; Petruzzi, S and Zeppegno, D (2024) Combining stakeholder and risk management: Multilayer network analysis for complex megaprojects. Journal of Construction Engineering and Management, 150(2): 04023161, ISSN 0733-9364

Chen, L (2019) An integrated construction schedule risk analysis approach for infrastructure projects under uncertainty. PhD thesis, University of Hong Kong, Hong Kong.

Chenchu, M. K.; Ruikar, K. and Jha, K. N. (2026) Strategic social network analysis for overcoming knowledge management challenges in construction: An in-depth review. Engineering, Construction and Architectural Management, 33(7), pp. 5495-5521. ISSN 0969-9988

Chiozzi, Maria Alma (2020) A collaborative contracting framework supported by BIM and lean. PhD thesis, Queensland University of Technology, Australia.

Chiponde, D B; Gledson, B and Greenwood, D (2020) An integrated approach to learning from project-related failures. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Cho, S K (2011) The relation between lean construction and performance in the Korean construction industry. PhD thesis, University of California, Berkeley, USA.

Clarke, N P; Spillane, J P and Bradley, J G (2024) Barriers to adopting strategic planning as a management tool in small construction firms. In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Dann, N; Hills, S and Worthing, D (2006) Assessing how organizations approach the maintenance management of listed buildings. Construction Management and Economics, 24(1), pp. 97-104. ISSN 01446193

Dasandara, M; Ingirige, B; Kulatunga, U and Fernando, T (2023) Climate financing barriers and strategies: The case of Sri Lanka. Journal of Financial Management of Property and Construction, 28(2), pp. 242-259. ISSN 1366-4387

Dawood, N N (1996) A strategy for a computer-based materials management system for the building industry. Journal of Financial Management of Property and Construction, 1(2), pp. 17-28. ISSN 1366-4387

Disney, O; Roupé, M and Johansson, M (2023) Driving circularity with total BIM: An integrated approach to data-driven design. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Domingo, N; Osmani, M and Price, A D F (2008) Reducing construction waste in healthcare facilities: A project lifecycle approach. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Dong, N (2012) Automated look-ahead schedule generation and optimization for the finishing phase of complex construction projects. PhD thesis, Stanford University, USA.

Duan, P; Zhou, J and Goh, Y M (2023) Safety risk diagnosis based on motion trajectory for construction workers: An integrated approach. Journal of Construction Engineering and Management, 149(11): 04023116, ISSN 0733-9364

Eisazadeh, N; De Troyer, F and Allacker, K (2025) Environmental performance of patient rooms using an integrated approach considering operational energy, daylight and comfort analysis. Smart and Sustainable Built Environment, 14(4), pp. 1117-1142. ISSN 2046-6099

Eker, S; Zimmermann, N; Carnohan, S and Davies, M (2018) Participatory system dynamics modelling for housing, energy and wellbeing interactions. Building Research & Information, 46(7), pp. 738-754. ISSN 0961-3218

Eldin, N N (1991) Management of engineering/design phase. Journal of Construction Engineering and Management, 117(1), pp. 163-175. ISSN 0733-9364

Ellis, R C T (2001) Lessons in project management. PhD thesis, Loughborough University, UK.

Elsayah, O S (2016) A framework for improvement of contractor selection procedures on major construction project in Libya. PhD thesis, Edinburgh Napier University, UK.

Eltinay, N and Egbu, C (2017) Disaster risk reduction conceptual framework: Open data for building resilience in critical infrastructure. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Elvin, G A (1998) A process model for integrated design and construction. PhD thesis, University of California, Berkeley, USA.

Enz, D L (2009) Construction project administration and management for mitigating work zone crashes and fatalities: An integrated risk management model. PhD thesis, Iowa State University, USA.

Espada, R J; Apan, A and McDougall, K (2015) Vulnerability assessment and interdependency analysis of critical infrastructures for climate adaptation and flood mitigation. International Journal of Disaster Resilience in the Built Environment, 6(3), pp. 313-346. ISSN 1759-5916

Eyiah, A K (2001) An integrated approach to financing small contractors in developing countries: A conceptual model. Construction Management and Economics, 19(5), pp. 511-518. ISSN 01446193

Faccio, M; Gamberi, M; Nedaei, M and Pilati, F (2018) Technical and economic modelling and evaluation of a water distribution system equipped with an autoclave for industrial production applications. Journal of Engineering, Design and Technology, 16(3), pp. 342-359. ISSN 1726-0531

Farouk, A M and Rahman, R A (2025) Integrated applications of building information modeling in project cost management: A systematic review. Journal of Engineering, Design and Technology, 23(1), pp. 287-305. ISSN 1726-0531

Fieldson, R (2007) Towards a framework for sustainability in UK retail architecture. PhD thesis, University of Newcastle upon Tyne, UK.

Foulds, C; Powell, J and Seyfan, G (2013) Investigating the performance of everyday domestic practices using building monitoring. Building Research & Information, 41(6), pp. 622-636. ISSN 0961-3218

Fu, Y; Chen, Y; Zhang, S and Wang, W (2015) Promoting cooperation in construction projects: An integrated approach of contractual incentive and trust. Construction Management and Economics, 33(8), pp. 653-670. ISSN 01446193

Gunning, J G (1997) The costs and benefits of achieving business excellence in construction organisations. Journal of Financial Management of Property and Construction, 2(1), pp. 45-58. ISSN 1366-4387

Gyi, D E; Gibb, A G F and Haslam, R A (1999) The quality of accident and health data in the construction industry: Interviews with senior managers. Construction Management and Economics, 17(2), pp. 197-204. ISSN 01446193

Haddad, A N; Silva, A B; Hammad, A W A; Najjar, M K; Vazquez, E G and Tam, V W Y (2023) An integrated approach of building information modelling and life cycle assessment (BIM-LCA) for gas and solar water heating systems. International Journal of Construction Management, 23(14), pp. 2452-2468. ISSN 1562-3599

Halfawy, M M R (1998) A multi-agent collaborative framework for concurrent design of constructed facilities. PhD thesis, Ohio State University, USA.

Harding, D and Boyd, P (2024) Generative AI and phd supervision: A covert third wheel or a seat at the table? In: Thomson, C (ed.) Proceedings of 40th Annual ARCOM Conference, 2-4 September 2024, London South Bank University, UK.

Hassan, O A B (2016) An integrated approach to assessing the sustainability of buildings. Journal of Engineering, Design and Technology, 14(4), pp. 835-850.

Hoeber, H and Alsem, D (2016) Life-cycle information management using open-standard BIM. Engineering, Construction and Architectural Management, 23(6), pp. 696-708. ISSN 0969-9988

Ibbs, W and Nguyen, L D (2007) Alternative for quantifying field-overhead damages. Journal of Construction Engineering and Management, 133(10), pp. 736-742. ISSN 0733-9364

Ibn Majdoub Hassani, Z; El Barkany, A; Jabri, A; El Abbassi, I and Darcherif, A M (2020) Hybrid approach for solving the integrated planning and scheduling production problem. Journal of Engineering, Design and Technology, 18(1), pp. 172-189. ISSN 1726-0531

Iftikhar, Rehab (2017) Crisis management in project based organizations and mega projects: An integrated approach. PhD thesis, Luiss Guido Carli, Italy.

Ilhan, B and Yobas, B (2019) Measuring construction for social, economic and environmental assessment. Engineering, Construction and Architectural Management, 26(5), pp. 746-765. ISSN 0969-9988

Iqbal, M.; Lin, Z.; Ahmed, R. I.; Ahmad, N. and Hussain, K. (2026) Exploring the paths to big data analytics implementation success in construction projects: An integrated approach. Engineering, Construction and Architectural Management, 33(7), pp. 5418-5444. ISSN 0969-9988

Jacobs, C and Jacobs, K (2003) An integrated approach to curriculum at foundation level. Journal of Engineering, Design and Technology, 1(1), pp. 89-101. ISSN 1726-0531

Jacobs, C and Miller, S (2003) An integrated approach to project work: An exploration of assessment practices from lecturer perspectives. Journal of Engineering, Design and Technology, 1(1), pp. 75-87. ISSN 1726-0531

Jeeninga, H and Kets, A (2004) Evolution of energy policy in the Netherlands: Past, present and future. Building Research & Information, 32(1), pp. 38-41. ISSN 0961-3218

Jowett, B; Edwards, D J and Kassem, M (2024) Field BIM and mobile BIM technologies: A requirements taxonomy and its interactions with construction management functions. Construction Innovation, 24(1), pp. 134-163. ISSN 1471-4175

Kamara, J M; Augenbroe, G; Anumba, C J and Carrillo, P M (2002) Knowledge management in the architecture, engineering and construction industry. Construction Innovation, 2(1), pp. 53-67. ISSN 1471-4175

Karaz, Mahmoud Abdel Fattah Abdel Athim (2024) Construction waste management model for contractors using lean and BIM tools. PhD thesis, Universidade do Minho, Portugal.

Kartarn, S; Ballard, G and Ibbs, C W (1997) Introducing a new concept and approach to modeling construction. Journal of Construction Engineering and Management, 123(1), pp. 89-97. ISSN 0733-9364

Kartman, S A (1995) Reengineering construction planning systems. PhD thesis, University of California, Berkeley, USA.

Keusters, G; Bakker, H and Houwing, E J (2024) Improving the performance of civil engineering projects through the integrated design process. Journal of Engineering, Design and Technology, 22(2), pp. 344-364. ISSN 1726-0531

Khan, M I; Khan, S; Khan, U and Haleem, A (2023) Modeling the big data challenges in context of smart cities: an integrated fuzzy ISM-DEMATEL approach. International Journal of Building Pathology and Adaptation, 41(2), pp. 422-453. ISSN 23984708

Khuc, T Q; Nguyen, V T and Do, S T (2026) Barriers to the adoption of blockchain technology in the construction industry: A total interpretive structural modeling (t ISM) and demat el approach. Construction Innovation, 26(1), pp. 260-285. ISSN 1471-4175

Kim, C (1996) An evaluation of the impact of integration and computerization on construction projects. PhD thesis, Worcester Polytechnic Institute, USA.

King, A P; Knight, A D and Griffith, A (2001) Understanding the dynamics of novation: A contractor's perspective. In: Akintoye, A (ed.) Proceedings of 17th Annual ARCOM Conference, 5-7 September 2001, Salford, UK.

Kishk, M; Al-Hajj, A and Pollock, R (2002) An innovative integrated approach to whole life costing. Journal of Financial Management of Property and Construction, 7(1), pp. 31-40. ISSN 1366-4387

Kishk, M; Laing, R and Pollock, R (2004) A novel approach for selecting finishes: System algorithm and methodology. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

Kohler, N and Hassler, U (2002) The building stock as a research object. Building Research & Information, 30(4), pp. 226-236. ISSN 0961-3218

Kolokotroni, M; Robinson-Gayle, S; Tanno, S and Cripps, A (2004) Environmental impact analysis for typical office facades. Building Research & Information, 32(1), pp. 2-16. ISSN 0961-3218

Krishnaraj, L; Kumar, V R P; Balasubramanian, M; Kumar, N and Shyamala, T (2022) Futuristic evaluation of building energy simulation model with comparison of conventional villas. International Journal of Construction Management, 22(1), pp. 31-40. ISSN 1562-3599

Kwofie, T E; Aigbavboa, C O and Mpambela, J S (2018) Improving continuing professional development compliance among construction professionals through integrated strategies in South Africa. Journal of Engineering, Design and Technology, 16(4), pp. 637-653. ISSN 1726-0531

Lather, J I (2019) A hybrid modeling approach using discrete event simulation and layout optimization for healthcare layout planning problems. PhD thesis, Pennsylvania State University, USA.

Lazo, A G; Çidik, M S; Rillie, I and Addyman, S (2023) Interrelationships in safety, health and well-being: Concepts, management and perceptions. In: Tutesigensi, A and Neilson, C J (eds.) Proceedings of 39th Annual ARCOM Conference, 4-6 September 2023, University of Leeds, Leeds, UK.

Lee, Y. J. (2026) Integrating patent analytics and employee sentiment: A multi-dimensional methodology for assessing organizational culture and R&D performance by company size in the Korean construction industry. Construction Management and Economics, 44(7), pp. 499-517. ISSN 0144-6193

Li, H X; Nair, S; Li, Y; Yahaya, A; Timms, W and Owolabi, A B (2026) Evaluating energy performance of educational buildings: A case study in Australia. Engineering, Construction and Architectural Management, 33(15), pp. 137-158. ISSN 0969-9988

Li, B and Yao, R (2012) Building energy efficiency for sustainable development in China: Challenges and opportunities. Building Research & Information, 40(4), pp. 417-431. ISSN 0961-3218

Li, K; Zou, Z; Shrestha, A; Shan, T and Shuai, F (2025) Fostering technological innovation value in rail megaprojects: Powers from the knowledge-collaboration network. Journal of Construction Engineering and Management, 151(11): 04025176, ISSN 0733-9364

Li, Y (2023) Integrated multi-stage decision-support for enhanced infrastructure restoration under uncertainty. PhD thesis, George Mason University, USA.

Lisø, K R (2006) Integrated approach to risk management of future climate change impacts. Building Research & Information, 34(1), pp. 1-10. ISSN 0961-3218

Liu, F (2015) Integrated change and knowledge management for energy efficient retrofit projects. PhD thesis, Pennsylvania State University, USA.

Lo Prete, Matteo (2013) Synergies between management and valorization of cultural heritage through models based on BIM technologies. PhD thesis, Politecnico di Milano, Italy.

Lokuge, W; Gamage, N and Setunge, S (2016) Fault tree analysis method for deterioration of timber bridges using an Australian case study. Built Environment Project and Asset Management, 6(3), pp. 332-344. ISSN 2044-124X

Lummen, N S; Shirozu, H; Okada, N and Yamada, F (2016) Flood risk management an illustrative approach. International Journal of Disaster Resilience in the Built Environment, 7(4), pp. 388-405. ISSN 1759-5916

MacDonald, J and Mills, J (2013) An IPD approach to construction education. Construction Economics and Building, 13(2), pp. 93-103. ISSN 2204-9029

Mahato, B K and Ogunlana, S O (2011) Conflict dynamics in a dam construction project: A case study. Built Environment Project and Asset Management, 1(2), pp. 176-194. ISSN 2044-124X

Makrigeorgis, C N (1991) Development of an optimal durability-based highway cost allocation model. PhD thesis, Texas A&M University, USA.

Martabid, J E and Mourgues, C (2015) Criteria used for selecting envelope wall systems in Chilean residential projects. Journal of Construction Engineering and Management, 141(12): 05015011, ISSN 0733-9364

Marzouk, M and Zaher, M (2025) Integrated approach for facility management of existing buildings using point cloud segmentation. International Journal of Building Pathology and Adaptation, 43(6), pp. 1439-1465. ISSN 2398-4708

Mason, J (1999) The impact of total quality management on construction worker safety. PhD thesis, University of South Florida, USA.

McEntire, D; Crocker, C G and Peters, E (2010) Addressing vulnerability through an integrated approach. International Journal of Disaster Resilience in the Built Environment, 1(1), pp. 50-64. ISSN 1759-5916

Moghadam, M (2014) Lean-mod: An approach to modular construction manufacturing production efficiency improvement. PhD thesis, University of Alberta, Canada.

Mohammed, A B (2022) Applying BIM to achieve sustainability throughout a building life cycle towards a sustainable BIM model. International Journal of Construction Management, 22(2), pp. 148-165. ISSN 1562-3599

Molaei, M (2021) In pursuit of success: Evaluating the management of engineering projects, cross-sectoral analysis of project management efforts. PhD thesis, Delft University of Technology, Netherlands.

Mootanah, D P (2000) Theory meets practice: Proposal for a dynamic value and risk methodology for project management. Journal of Construction Research, 1(2), pp. 131-138. ISSN 1609-9451

Mostafaeipour, A; Qolipour, M; Rezaei, M; Jahangiri, M; Goli, A and Sedaghat, A (2021) A novel integrated approach for ranking solar energy location planning: A case study. Journal of Engineering, Design and Technology, 19(3), pp. 698-720. ISSN 1726-0531

Mwanaumo, E M (2013) An integrated approach to multi-stakeholder interventions in construction health and safety. DPhil thesis, University of Johannesburg, South Africa.

Nawi, M N M (2012) Development of a framework of critical success factors (CSFs) for effective integrated design team delivery in Malaysian IBS projects. PhD thesis, University of Salford, UK.

Negara, Kartika Puspa (2020) Client construction project manager competency in Indonesia. PhD thesis, Queensland University of Technology, Australia.

Nepal, M P (2011) Automated extraction and querying of construction-specific design features from a building information model. PhD thesis, University of British Columbia, Canada.

Nesan Lenin, J (2011) Integrated e-bidding framework for construction. International Journal of Construction Education and Research, 7(4), pp. 243-258. ISSN 1557-8771

Neshat, N; Hadian, H and Rahimi Alangi, S (2020) Technological learning modelling towards sustainable energy planning. Journal of Engineering, Design and Technology, 18(1), pp. 84-101. ISSN 1726-0531

Nirupama, N (2012) Risk and vulnerability assessment: A comprehensive approach. International Journal of Disaster Resilience in the Built Environment, 3(2), pp. 103-114. ISSN 1759-5916

Novak, V M (2012) Managing sustainability value in design: A systems approach. PhD thesis, Virginia Polytechnic Institute and State University, USA.

Novotny, V (2013) Water-energy nexus: Retrofitting urban areas to achieve zero pollution. Building Research & Information, 41(5), pp. 589-604. ISSN 0961-3218

Nzekwe-Excel, C (2010) Development of an integrated framework for satisfaction assessment of construction project teams. PhD thesis, University of Wolverhampton, UK.

Ofosu, K (2010) An integrated approach to transportation infrastructure management. PhD thesis, Florida State University, USA.

Oladokun, T T and Komolafe, M O (2017) Drivers of rural housing development in Edo State, Nigeria. Journal of Construction Business and Management, 1(2), pp. 35-46. ISSN 2521-0165

Oliveira, Iberê Pinheiro de (2023) Criteria for building certification and assessment: An integrated approach to degradation and performance. PhD thesis, Universidade de Brasília, Brazil.

Ospina Alvarado, A M (2011) Unified framework for construction project integration and its potential association with project performance. PhD thesis, Georgia Institute of Technology, USA.

Ospina-Alvarado, A; Castro-Lacouture, D and Roberts, J S (2016) Unified framework for construction project integration. Journal of Construction Engineering and Management, 142(7): 4016019, ISSN 0733-9364

Owoyemi, J A (2018) Performance evaluation of higway transportation design-build project delivery: A case study. PhD thesis, University of Maryland, College Park, USA.

Ozorhon, B. and Karakurt, C. (2026) Navigating retail construction projects in Türkiye: Critical enablers and barriers. Engineering, Construction and Architectural Management, pp. 1-20. ISSN 0969-9988

Ozorhon, B. and Karakurt, C. (2026) Navigating retail construction projects in Türkiye: Critical enablers and barriers. Engineering, Construction and Architectural Management, pp. 1-20. ISSN 0969-9988

Pandithawatta, T P W S I; Zainudeen, N and Perera, C S R (2020) An integrated approach of lean-green construction: Sri Lankan perspective. Built Environment Project and Asset Management, 10(2), pp. 200-214. ISSN 2044-124X

Papageorgiou, G and Demetriou, G (2020) Investigating learning and diffusion strategies for sustainable mobility. Smart and Sustainable Built Environment, 9(1), pp. 1-16. ISSN 2046-6099

Patacas, J (2019) A framework and common data environment for the development and management of asset information models. PhD thesis, Teesside University, UK.

Pawan, P and Lorterapong, P (2016) A fuzzy-based integrated framework for assessing time contingency in construction projects. Journal of Construction Engineering and Management, 142(3): 04015083, ISSN 0733-9364

Pinheiro Santos Fernandes, P G; Elias Arantes, A and Ferreira Nobre Júnior, E (2024) Optimization model for earthwork allocations considering the construction of multiple haul roads: GIS-based integrated approach. Journal of Construction Engineering and Management, 150(4): 05024001, ISSN 0733-9364

Pongpeng, J (2002) Multicriteria and multidecision-makers in tender evaluation. PhD thesis, Queensland University of Technology, Australia.

Pouryarmohammadi, M; Ahmadi, H and Salaripour, A (2022) Developing physical resilience strategies in passive defense according to identification of endangered areas of urban environments (case study: Ahvaz city). International Journal of Disaster Resilience in the Built Environment, 13(1), pp. 14-30. ISSN 1759-5916

Richards, J L (1973) An integrated approach to construction management. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Root, D S; Thorpe, A; Thomson, D S; Austin, S A and Hammond, J W (2003) Design chains: Introducing supply chain management into the construction design process. Journal of Construction Procurement, 9(2), pp. 29-39. ISSN 1358-9180

Rwelamila, P D and Hall, K A (1995) Total systems intervention: An integrated approach to time, cost and quality management. Construction Management and Economics, 13(3), pp. 235-241. ISSN 01446193

Sadat, H and Thomas, N (2025) An integrated approach to investigate the causes of time delays and cost overruns in Afghanistan construction projects. International Journal of Construction Management, 25(6), pp. 624-634. ISSN 1562-3599

Sadeh, H; Mirarchi, C and Pavan, A (2021) Integrated approach to construction risk management: Cost implications. Journal of Construction Engineering and Management, 147(10), ISSN 0733-9364

Sanvido, V E and Medeiros, D J (1990) Applying computer-integrated manufacturing concepts to construction. Journal of Construction Engineering and Management, 116(2), pp. 365-379. ISSN 0733-9364

Schmidt, M; Crawford, R H and Warren-Myers, G (2020) Integrating life-cycle GHG emissions into a building's economic evaluation. Buildings & Cities, 1(1), pp. 361-378. ISSN 2632-6655

Schultmann, F and Rentz, O (2002) Scheduling of deconstruction projects under resource constraints. Construction Management and Economics, 20(5), pp. 391-401. ISSN 01446193

Shen, Q; Wang, H and Tang, B S (2014) A decision-making framework for sustainable land use in Hong Kong's urban renewal projects. Smart and Sustainable Built Environment, 3(1), pp. 35-53. ISSN 2046-6099

Sheng, Boyuan (2022) Enhancing green infrastructure management for flood-drought resilience in brisbane, Australia: An integrated approach. PhD thesis, Queensland University of Technology, Australia.

Shupe-Diggs, C; Diko, S K and Santo, C A (2020) An integrated social vulnerability assessment of riverine flood hazards in Shelby County, Tennessee. International Journal of Disaster Resilience in the Built Environment, 12(3), pp. 308-321. ISSN 1759-5916

Siva, J; Gajendran, T; Toinpre, O and Vaughan, J (2025) Driving the zero-carbon construction strategy: Key barriers and enablers. Built Environment Project and Asset Management, 15(3), pp. 380-398. ISSN 2044-124X

Solnosky, R L (2013) Integrated structural process model: An inclusive non-material specific approach to determining the required tasks and information exchanges for structural building information modeling. PhD thesis, Pennsylvania State University, USA.

Soltani, M; Aouag, H and Mouss, M D (2020) An integrated framework using VSM, AHP and TOPSIS for simplifying the sustainability improvement process in a complex manufacturing process. Journal of Engineering, Design and Technology, 18(1), pp. 211-229. ISSN 1726-0531

Soltanmohammadlou, N.; Hon, C. K. H.; Drogemuller, R.; Sheikhkhoshkar, M. and Rahimian, F. (2026) An advanced exploration of technological functionalities addressing risk factors in earthmoving equipment operation on construction sites: A systematic literature review. Smart and Sustainable Built Environment, 15(5), pp. 1846-1876. ISSN 2046-6099

Staub-French, S; Pilon, A; Poirier, E; Fallahi, A; Kasbar, M; Calderon, F; Teshnizi, Z and Froese, T (2022) Construction process innovation on brock commons tallwood house. Construction Innovation, 22(1), pp. 1-22. ISSN 1471-4175

Stephenson, P (1988) Estimating, planning and control systems based on production data in the construction industry. PhD thesis, Sheffield City Polytechnic, UK.

Stewart, R A (2003) Lifecycle management of information technology (IT) projects in construction. PhD thesis, Griffith University, Australia.

Sulaiman, M J (1997) Intesite: Intelligent site layout planning within an object-oriented integrated construction environment. PhD thesis, University of Salford, UK.

Sun, M (1993) Technology transfer, architectural design and integrated building design systems. PhD thesis, University of Newcastle upon Tyne, UK.

Syal, M G (1992) Construction process knowledge model to assist method selection in project planning. PhD thesis, Pennsylvania State University, USA.

Syal, M G; Grobler, F; Willenbrock, J H and Parfitt, M K (1992) Construction project planning process model for small-medium builders. Journal of Construction Engineering and Management, 118(4), pp. 651-666. ISSN 0733-9364

Teixeira, J M (1993) Contractors management functions: an integrated approach for planning, estimating and control. PhD thesis, Loughborough University, UK.

Tellam, I (2024) Culture change in the UK construction industry: an anthropological perspective. Buildings & Cities, 5(1), pp. 620-628. ISSN 2632-6655

Thomson, C and El-Haram, M (2014) Potential and implications of sustainability action plans: Lessons from the Greater Middlehaven Regeneration Project. Built Environment Project and Asset Management, 4(1), pp. 108-122. ISSN 2044-124X

Tian, S; Abdalla, A; Zhang, G; Tang, Y and Cao, X (2025) Pathways of construction dispute formation in China: A DEMATEL, AISM, and MICMAC-based approach. Journal of Construction Engineering and Management, 151(10): 05025013, ISSN 0733-9364

Tijhuis, W (1996) Contractors at work or into conflict? Lessons from international collaboration: Dutch experiences into German construction industry. PhD thesis, Eindhoven University of Technology, Netherlands.

Tran, T X M; Malano, H M and Thompson, R G (2003) Application of the analytic hierarchy process to prioritise irrigation asset renewals: The case of the la khe irrigation scheme, Vietnam. Engineering, Construction and Architectural Management, 10(6), pp. 382-390. ISSN 0969-9988

Tse, R Y C and Raftery, J (2001) Infrastructure policy and economic growth: Case of Hong Kong. Construction Economics and Building, 1(1), pp. 66-79. ISSN 2204-9029

Uniacke, H (2001) Design of a low cost ventilated photovoltaic cladding. PhD thesis, Cardiff University, UK.

Ur Rehman, H S; Raza, M A; Masood, R; Khan, M A; Alamgir, S; Javed, M A; Roy, K and Lim, J B P (2023) A multi-facet BIM based approach for green building design of new multi-family residential building using LEED system. International Journal of Construction Management, 23(12), pp. 2024-2038. ISSN 1562-3599

Vanegas Pabon, J A (1988) A model for design/construction integration during the initial phases of design for building construction projects. PhD thesis, Stanford University, USA.

Wang, S (2017) Integrated approach and analysis of reliability, robustness, resilience and infrastructure applications. PhD thesis, University of Washington, USA.

Wang, Z; Jia, L; Lv, J and Huang, J (2024) Minimization of rebar cutting waste using BIM and cutting pattern-oriented multiobjective optimization. Journal of Construction Engineering and Management, 150(11): 04024166, ISSN 0733-9364

Warszawski, A (1984) Construction management program. Journal of Construction Engineering and Management, 110(3), pp. 297-310. ISSN 0733-9364

Waugh, L M (1990) A construction planner. PhD thesis, Stanford University, USA.

Whelton, M G and Keane, M M (1998) The systematic development of a software environment for building appraisal in the building renovation industry. In: Hughes, W (ed.) Proceedings of 14th Annual ARCOM Conference, 9-11 September 1998, Reading, UK.

Willar, D; Estrellita Varina Yanti, W; Daisy Debora Grace, P and Rudolf Estephanus Golioth, M (2021) Sustainable construction practices in the execution of infrastructure projects: The extent of implementation. Smart and Sustainable Built Environment, 10(1), pp. 106-124. ISSN 2046-6099

Wright, G B and Jack, L B (2013) Property-level stormwater drainage systems: Integrated flow simulation and whole-life costs. Building Research & Information, 41(2), pp. 223-236. ISSN 0961-3218

Xiang, Y; Opoku, A and Florez-Perez, L (2021) Carbon emissions optimisation in prefabrication construction: A review of current design integrated approaches. In: Scott, L and Neilson, C J (eds.) Proceedings of 37th Annual ARCOM Conference, 6-7 September 2021, Online Event, UK.

Xiang, Z; Rashidi, A and Ou, G (2021) Automated framework to translate rebar spatial information from GPR into BIM. Journal of Construction Engineering and Management, 147(10): 04021120, ISSN 0733-9364

Xiao, H and Proverbs, D G (2003) Cost certainty and time certainty: An international investigation. In: Greenwood, D J (ed.) Proceedings of 19th Annual ARCOM Conference, 3-5 September 2003, Brighton, UK.

Yu, H (2010) An integrated approach toward lean for production homebuilders. PhD thesis, University of Alberta, Canada.

Yu, Yifei (2024) Circular construction ecosystems: Designing a circularity information platform for the built environment. PhD thesis, University of Twente, Netherlands.

Yun, G C (2008) The utility of knowledge mapping as an approach to improving corporate and project performance: a case study of a large South Korean consulting firm. PhD thesis, University of Salford, UK.

Yılmaz, M B and Rızvanoğlu, K (2022) Understanding users' behavioral intention to use voice assistants on smartphones through the integrated model of user satisfaction and technology acceptance: A survey approach. Journal of Engineering, Design and Technology, 20(6), pp. 1738-1764. ISSN 1726-0531

Zaid Alkilani, Suhair (2018) Performance measurement and improvement model for small and medium contractors in developing countries. PhD thesis, University of New South Wales, Australia.

Zeb, J (2022) A level of service framework for service-centric asset management planning. Built Environment Project and Asset Management, 12(2), pp. 147-162. ISSN 2044-124X

Zhan, H; Hwang, B G and Jabbar, S B B A (2025) An integrated approach to assessing digitalization of integrated digital delivery projects. Journal of Construction Engineering and Management, 151(6): 04025044, ISSN 0733-9364

Zhan, H; Hwang, B G and Jabbar, S B B A (2025) Erratum for: An integrated approach to assessing digitalization of integrated digital delivery projects (journal of construction engineering and management DOI: 10.1061/jcemd4.Coeng-16149). Journal of Construction Engineering and Management, 151(10): 08225001, ISSN 0733-9364

Zhang, Guomin (2005) Factors influencing the implementation of raised floor system for the fitout of office buildings in the Australian context. PhD thesis, Queensland University of Technology, Australia.

Zhou, W (2009) An investigation into a distributed virtual reality environment for real-time collaborative 4D construction planning and simulation. PhD thesis, University of Wolverhampton, UK.

Zulu, S and Brown, A (2004) Quality of the project management process: An integrated approach. In: Khosrowshahi, F (ed.) Proceedings of 20th Annual ARCOM Conference, 1-3 September 2004, Edinburgh, UK.

de Ridder, H and Vrijhoef, R (2008) Developing a strategy for 'living buildings': Beyond cradle to cradle with living building concept. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

van den Adel, J F; Al-Jibouri, S H; Karim, U F A and Mawdesley, M (2003) Integrated foundation design of buildings: Case demonstration of a prototype expert system. Journal of Engineering, Design and Technology, 1(1), pp. 55-74. ISSN 1726-0531