Items with Subject: building performance

Abanomi, W M (2005) Environmental design of prototype school buildings in hot, arid regions with special reference to Riyadh, Saudi Arabia. PhD thesis, Cardiff University, UK.

Abdul Nasir, N A B; Hassan, A S; Khozaei, F and Abdul Nasir, M H B (2021) Investigation of spatial configuration management on social distancing of recreational clubhouse for COVID-19 in Penang, Malaysia. International Journal of Building Pathology and Adaptation, 39(5), pp. 782-810. ISSN 23984708

Abdulkareem, M (2016) Investigation of the daylighting and the thermal environment of Nigeria's low-income housing: the case of Abuja. PhD thesis, University of Portsmouth, UK.

Adamy, A and Abu Bakar, A H (2021) Developing a building-performance evaluation framework for post-disaster reconstruction: The case of hospital buildings in Aceh, Indonesia. International Journal of Construction Management, 21(1), pp. 56-77. ISSN 1562-3599

Agha, R H M and Hussein, A N (2024) Adaptation re-use of traditional cafés in Erbil, Iraq. International Journal of Building Pathology and Adaptation, 42(1), pp. 153-174. ISSN 23984708

Agha, R H M and Kamara, J M (2017) Adaptations in traditional courtyard houses in Baghdad, Iraq. International Journal of Building Pathology and Adaptation, 35(4), pp. 348-363.

Aghimien, E I and Li, D H W (2022) Application of luminous efficacies for daylight illuminance data generation in subtropical Hong Kong. Smart and Sustainable Built Environment, 11(2), pp. 271-293. ISSN 2046-6099

Aguilar-Carrasco, M T; Álvarez-López, A I; Bustamante, P; Álvarez Ríos, A I and Domínguez-Amarillo, S (2025) The impact of light adjustment versus tuneable white mode on ICU staff's circadian rhythms. Building Research & Information, 53(1-2), pp. 120-138. ISSN 0961-3218

Ahmadi, M; Ahmadi, A and Yousefi, S (2025) Human behavior and decision-making in earthquake emergencies: Insights from virtual reality and serious games. International Journal of Construction Management, 25(11), pp. 1254-1272. ISSN 1562-3599

Ahmadu, H A; Ibrahim, Y M; Ibrahim, A D and Abdullahi, M (2015) Modelling building construction durations. Journal of Financial Management of Property and Construction, 20(1), pp. 65-84. ISSN 1366-4387

Akin, S; Ergun, O; Surer, E and Gursel Dino, I (2021) An immersive performative architectural design tool with daylighting simulations: A building information modeling-based approach. Engineering, Construction and Architectural Management, 28(4), pp. 1319-1344. ISSN 0969-9988

Akuete, E; Nduka, D O and Ogundipe, K E (2022) Maintenance feedback mechanisms and limiting factors of post-occupancy evaluation in student residents of higher education institutions in Nigeria. Journal of Construction in Developing Countries, 27(2), pp. 17-41. ISSN 1823-6499

Al Jassmi, H; Al Ahmad, M and Ahmed, S (2021) Automatic recognition of labor activity: A machine learning approach to capture activity physiological patterns using wearable sensors. Construction Innovation, 21(4), pp. 555-575. ISSN 1471-4175

Alemu, S K (2022) Construction time prediction model for public building projects. Engineering, Construction and Architectural Management, 29(5), pp. 2183-2206. ISSN 0969-9988

Alhusban, A A; Alhusban, S A and Alhusban, M A (2022) How the COVID 19 pandemic would change the future of architectural design. Journal of Engineering, Design and Technology, 20(1), pp. 339-357. ISSN 1726-0531

Ali, I; Peng, C; Ullah, H; Deng, J; Bibi, A and Mahar, W A (2025) Multi-objective optimization of insulation materials for building energy and comfort improvements in hot and arid regions. Building Research & Information, 53(6), pp. 797-816. ISSN 0961-3218

Allam, A S; Bassioni, H; Ayoub, M and Kamel, W (2023) Investigating the performance of genetic algorithm and particle swarm for optimizing daylighting and energy performance of offices in alexandria, Egypt. Smart and Sustainable Built Environment, 12(3), pp. 682-700. ISSN 2046-6099

Allam, A S; Bassioni, H; Ayoub, M and Kamel, W (2024) A framework for obtaining a BIM-compatible design solution based on quantitative decisions on building performance. International Journal of Construction Management, 24(11), pp. 1176-1190. ISSN 1562-3599

Alwan, Z and Gledson, B J (2015) Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, 5(3), pp. 290-303. ISSN 2044-124X

Alzaed, A (2012) User centered passive building design. PhD thesis, University of Liverpool, UK.

Andersen, M (2002) Light distribution through advanced fenestration systems. Building Research & Information, 30(4), pp. 264-281. ISSN 0961-3218

Andersen, M; Kleindienst, S; Yi, L; Lee, J; Bodart, M and Cutler, B (2008) An intuitive daylighting performance analysis and optimization approach. Building Research & Information, 36(6), pp. 593-607. ISSN 0961-3218

Andreu, I C and Oreszczyn, T (2004) Architects need environmental feedback. Building Research & Information, 32(4), pp. 313-328. ISSN 0961-3218

Angel, S; Lamson-Hall, P and Blanco, Z G (2021) Anatomy of density: Measurable factors that constitute urban density. Buildings & Cities, 2(1), pp. 264-282. ISSN 2632-6655

Anwer, S; Li, H; Antwi-Afari, M F; Umer, W and Wong, A Y L (2021) Evaluation of physiological metrics as real-time measurement of physical fatigue in construction workers: State-of-the-art review. Journal of Construction Engineering and Management, 147(5): 03121001, ISSN 0733-9364

Aragon, V; Gauthier, S; Warren, P; James, P A B and Anderson, B (2019) Developing English domestic occupancy profiles. Building Research & Information, 47(4), pp. 375-393. ISSN 0961-3218

Asiedu, R O; Frempong, N K and Alfen, H W (2017) Predicting likelihood of cost overrun in educational projects. Engineering, Construction and Architectural Management, 24(1), pp. 21-39. ISSN 0969-9988

Asiedu, R O; Frempong, N K and Nani, G (2016) Parametric time overrun estimation of building projects. Journal of Financial Management of Property and Construction, 21(3), pp. 253-268. ISSN 1366-4387

Asiedu, R O and Gyadu-Asiedu, W (2020) Assessing the predictability of construction time overruns using multiple linear regression and Markov chain Monte Carlo. Journal of Engineering, Design and Technology, 18(3), pp. 583-600. ISSN 1726-0531

Ayda Montaser, K and Heidari, S (2021) Optimizing window size by integrating energy and lighting analyses considering occupants' visual satisfaction. Built Environment Project and Asset Management, 11(4), pp. 673-686. ISSN 2044-124X

Ayo-Odifiri, S O (2025) A systematic review of the applicability of nature-based solutions for resilient urban residences in southern Nigeria. International Journal of Disaster Resilience in the Built Environment, 16(3), pp. 344-362. ISSN 1759-5908

Baborska-Narozny, M; Bandurski, K and Grudzinska, M (2025) Understanding shading through home-use experience, measurement and modelling. Buildings & Cities, 6(1), pp. 466-489. ISSN 2632-6655

Baborska-Narożny, M and Stevenson, F (2019) Service controls interfaces in housing: Usability and engagement tool development. Building Research & Information, 47(3), pp. 290-304. ISSN 0961-3218

Bae, S; Martin, C S and Asojo, A O (2021) Higher education students' indoor environmental quality satisfaction benchmark. Building Research & Information, 49(6), pp. 679-694. ISSN 0961-3218

Baienat, S. and Iordanova, I. (2026) Quantifying building adaptability and circular performance through BIM: The adaptation intensity index (AII), circular adaptability performance (CAP), and digital adaptability passport (DAP). Smart and Sustainable Built Environment, pp. 1-22. ISSN 2046-6099

Bala, K; Bustani, S A and Waziri, B S (2014) A computer-based cost prediction model for institutional building projects in Nigeria: An artificial neural network approach. Journal of Engineering, Design and Technology, 12(4), pp. 519-530.

Ballal, T M A and Sher, W D (2003) Artificial neural network for the selection of buildable structural systems. Engineering, Construction and Architectural Management, 10(4), pp. 263-271. ISSN 0969-9988

Barbosa, S; Alberto, K C and Piroozfar, P (2025) Natural daylighting through double skin façades: A review. Architectural Engineering and Design Management, 21(2), pp. 231-251. ISSN 1745-2007

Basurto, C; Kämpf, J H and Scartezzini, J-L (2017) Multi-criteria analysis for the integrated performance assessment of complex fenestration systems. Building Research & Information, 45(8), pp. 926-942. ISSN 0961-3218

Batista Silveira Dos Santos, L F (2020) Efficient modeling strategies for performance-based building design supported by daylight and building energy simulations. PhD thesis, University of California, Berkeley, USA.

Best, R and Purdey, B (2012) Assessing occupant comfort in an iconic sustainable education building. Construction Economics and Building, 12(3), pp. 55-65. ISSN 2204-9029

Bhorkar, S; Glew, D and Fletcher, M (2026) Improving survey-based data collection for more effective domestic retrofit evaluations: Perspectives from occupants and surveyors. Building Research & Information, 54(3), pp. 273-288. ISSN 0961-3218

Blackman, I Q and Picken, D H (2010) Height and construction costs of residential high-rise buildings in Shanghai. Journal of Construction Engineering and Management, 136(11), pp. 1169-1180. ISSN 0733-9364

Boissonneault, A and Peters, T (2024) An exploration of post-occupancy evaluation in Canada: Origins, milestones and next steps. Building Research & Information, 52(3), pp. 332-357. ISSN 0961-3218

Bolchover, J and Mundle, K (2026) Post-disaster reconstruction: Infill housing prototypes for kathmandu. Buildings & Cities, 7(1), pp. 273-292. ISSN 2632-6655

Bourgeois, D; Reinhart, C F and Ward, G (2008) Standard daylight coefficient model for dynamic daylighting simulations. Building Research & Information, 36(1), pp. 68-82. ISSN 0961-3218

Boussabaine, A H and Kirkham, R J (2004) Simulation of maintenance costs in UK local authority sport centres. Construction Management and Economics, 22(10), pp. 1011-1020. ISSN 01446193

Brown, L A and Cresciani, M (2017) Adaptable design in olympic construction. International Journal of Building Pathology and Adaptation, 35(4), pp. 397-416.

Burman, E (2016) Assessing the operational performance of educational buildings against design expectations: a case study approach. PhD thesis, University College London, UK.

Cammarano, S; Pellegrino, A; Lo Verso, V R M and Aghemo, C (2015) Assessment of daylight in rooms with different architectural features. Building Research & Information, 43(2), pp. 222-237. ISSN 0961-3218

Carlos, J S (2017) The impact of refurbished windows on Portuguese old school buildings. Architectural Engineering and Design Management, 13(3), pp. 185-201. ISSN 1745-2007

Carpino, C; Loukou, E; Heiselberg, P and Arcuri, N (2020) Energy performance gap of a nearly zero energy building (nZEB) in Denmark: The influence of occupancy modelling. Building Research & Information, 48(8), pp. 899-921. ISSN 0961-3218

Carter, D J (2004) Developments in tubular daylight guidance systems. Building Research & Information, 32(3), pp. 220-234. ISSN 0961-3218

Cebrat, K; Narożny, J; Baborska-Narozny, M and Smektała, M (2025) Modelling site-specific outdoor temperature for buildings in urban environments. Buildings & Cities, 6(1), pp. 490-510. ISSN 2632-6655

Chan, D W M and Kumaraswamy, M M (1995) A study of the factors affecting construction durations in Hong Kong. Construction Management and Economics, 13(4), pp. 319-333. ISSN 01446193

Chauhan, H; Jang, Y and Jeong, I (2026) Assessing the impact of human-robot collaboration on worker productivity in construction through psychophysiological response analysis. Journal of Construction Engineering and Management, 152(3): 04025273, ISSN 0733-9364

Chen, W and Lai, J (2025) Performance assessment of residential building renovation: A scientometric analysis and qualitative review of literature. Smart and Sustainable Built Environment, 14(3), pp. 625-648. ISSN 2046-6099

Clark, G G (1993) Rule-based integrated building management systems. PhD thesis, Brunel University, UK.

Comiskey, D and Wilson, K (2020) A performance barrier? Cavity barrier installation in wall envelope makeups. In: Scott, L and Neilson, C J (eds.) Proceedings of 36th Annual ARCOM Conference, 7-8 September 2020, Online Event, UK.

Conejos, S; Chew, M Y L and Yung, E H K (2017) The future adaptivity of nineteenth century heritage buildings. International Journal of Building Pathology and Adaptation, 35(4), pp. 332-347.

Curwell, S; Yates, A; Howard, N; Bordass, B and Doggart, J (1999) The green building challenge in the UK. Building Research & Information, 27(4-5), pp. 286-293. ISSN 0961-3218

Dadi, G B (2013) Applying cognitive principles to the delivery of engineering information by different mediums. PhD thesis, University of Kentucky, USA.

Dahlan, N D; Ghaffarianhoseini, A and Hassan, N (2022) Sensory and physiological assessment of spatial transient thermal environment changes at a tropical university campus. Smart and Sustainable Built Environment, 11(3), pp. 516-531. ISSN 2046-6099

Das, S; Chew, M Y L and Poh, K L (2010) Multi-criteria decision analysis in building maintainability using analytical hierarchy process. Construction Management and Economics, 28(10), pp. 1043-1056. ISSN 1466433X

Davies, M; Jackaway, A; Hardy, R; Dewey, E and Littler, J (2000) A translucent louvre system: Design concepts, modelling work and monitored data. Building Research & Information, 28(1), pp. 42-50. ISSN 0961-3218

De Dear, R (2011) Revisiting an old hypothesis of human thermal perception: Alliesthesia. Building Research & Information, 39(2), pp. 108-117. ISSN 0961-3218

Debrah, C; Chan, A P C; Darko, A; Akowuah, E; Amudjie, J; Asare, K A B and Ghansah, F A (2025) A bibliometrix-based scientometric-systematic analysis and visualization of the global outlook on post-occupancy evaluation of green building. Building Research & Information, 53(8), pp. 1058-1074. ISSN 0961-3218

Deng, L. and Zu, F. (2026) Promoting public housing development on private land: The case of Hong Kong. Engineering, Construction and Architectural Management, pp. 1-24. ISSN 0969-9988

Domínguez-Hernández, J; Pérez-Bella, J M; Alonso-Martínez, M; Cano-Suñén, E and del Coz-Díaz, J J (2017) Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), pp. 492-507. ISSN 0961-3218

Eisazadeh, N; De Troyer, F and Allacker, K (2025) Environmental performance of patient rooms using an integrated approach considering operational energy, daylight and comfort analysis. Smart and Sustainable Built Environment, 14(4), pp. 1117-1142. ISSN 2046-6099

El-Rayes, K and Hyari, K (2005) Conlight: Lighting design model for nighttime highway construction. Journal of Construction Engineering and Management, 131(4), pp. 467-476. ISSN 0733-9364

El-Rayes, K and Hyari, K (2005) Optimal lighting arrangements for nighttime highway construction projects. Journal of Construction Engineering and Management, 131(12), pp. 1292-1300. ISSN 0733-9364

Engelen, L; Rahmann, M and de Jong, E (2022) Design for healthy ageing–the relationship between design, well-being, and quality of life: A review. Building Research & Information, 50(1-2), pp. 19-35. ISSN 0961-3218

Eslamirad, N; Malekpour Kolbadinejad, S; Mahdavinejad, M and Mehranrad, M (2020) Thermal comfort prediction by applying supervised machine learning in green sidewalks of Tehran. Smart and Sustainable Built Environment, 9(4), pp. 361-374. ISSN 2046-6099

Evans, M (2013) An investigation into occupants' satisfaction in UK sustainable social housing. PhD thesis, University of the West of England, Bristol, UK.

Fang, T; Sun, L; Xu, X; Li, H and Shao, Z (2024) Exploring the impacts of spatial morphology of underground shopping mall atriums on natural lighting performance. Architectural Engineering and Design Management, 20(4), pp. 808-831. ISSN 1745-2007

Farnham, C; Emura, K and Mizuno, T (2015) Evaluation of cooling effects: Outdoor water mist fan. Building Research & Information, 43(3), pp. 334-345. ISSN 0961-3218

Fernandes, Luciana Oliveira (2015) Procedure for retrofit of the heat power performance of educational buildings by applying passive strategies conditioning. PhD thesis, Universidade Estadual de Campinas, Brazil.

Fletcher, K (2018) A systemic model for a building performance and condition evaluation for primary schools. PhD thesis, University of Salford, UK.

Forcada, N; Macarulla, M and Love, P E D (2013) Assessment of residential defects at post-handover. Journal of Construction Engineering and Management, 139(4), pp. 372-378. ISSN 0733-9364

Forsythe, P (2018) Extending and operationalizing construction productivity measurement on building projects. Construction Management and Economics, 36(12), pp. 683-699. ISSN 01446193

Forsythe, P and Ding, G (2014) Greenhouse gas emissions from excavation on residential construction sites. Construction Economics and Building, 14(4), pp. 1-10. ISSN 2204-9029

Foster, J A and Poston, A (2024) Occupant experience of domestic kitchen environments in low-energy social and affordable housing in Scotland. Building Research & Information, 52(7), pp. 799-816. ISSN 0961-3218

Franke, M and Nadler, C (2021) Towards a holistic approach for assessing the impact of IEQ on satisfaction, health, and productivity. Building Research & Information, 49(4), pp. 417-444. ISSN 0961-3218

Futcher, J; Mills, G and Emmanuel, R (2018) Interdependent energy relationships between buildings at the street scale. Building Research & Information, 46(8), pp. 829-844. ISSN 0961-3218

Galasiu, A D and Reinhart, C F (2008) Current daylighting design practice: A survey. Building Research & Information, 36(2), pp. 159-174. ISSN 0961-3218

Garmston, H; Pan, W and de Wilde, P (2012) Decision-making in façade selection for multi-storey buildings. In: Smith, S D (ed.) Proceedings of 28th Annual ARCOM Conference, 3-5 September 2012, Edinburgh, UK.

Garretón, J Y; Rodriguez, R and Pattini, A (2016) Effects of perceived indoor temperature on daylight glare perception. Building Research & Information, 44(8), pp. 907-919. ISSN 0961-3218

Gaspari, J; Fabbri, K and Marchi, L (2025) Investigating the influence of perforated façade skins on indoor illuminance level: A case study. Architectural Engineering and Design Management, 21(2), pp. 211-230. ISSN 1745-2007

Geekiyanage, D and Ramachandra, T (2020) Nexus between running costs and building characteristics of commercial buildings: Hedonic regression modelling. Built Environment Project and Asset Management, 10(3), pp. 389-406. ISSN 2044-124X

Geekiyanage, D; Ramachandra, T and Rotimi, J O B (2017) A morphology-based model for forecasting cooling energy demand of condominium buildings in Sri Lanka. In: Chan, P W and Neilson, C J (eds.) Proceedings of 33rd Annual ARCOM Conference, 4-6 September 2017, Fitzwilliam College, Cambridge, UK.

Geng, S; Chau, H W; Yan, S; Zhang, W and Zhang, C (2020) Comparative analysis of hospital environments in Australia and China using the space syntax approach. International Journal of Building Pathology and Adaptation, 39(3), pp. 525-546. ISSN 23984708

Gholami, M; Mofidi Shemirani, M and Fayaz, R (2018) A modelling methodology for a solar energy-efficient neighbourhood. Smart and Sustainable Built Environment, 7(1), pp. 117-132. ISSN 2046-6099

Golzan, S S; Pouyanmehr, M and Sadeghi Naeini, H (2023) Recommended angle of a modular dynamic façade in hot-arid climate: Daylighting and energy simulation. Smart and Sustainable Built Environment, 12(1), pp. 27-37. ISSN 2046-6099

González, J; Da Costa, B B F; Tam, V W Y and Haddad, A (2024) Effects of latitude and building orientation in indoor-illuminance levels towards energy efficiency. International Journal of Construction Management, 24(7), pp. 784-798. ISSN 1562-3599

Gosling, J; Naim, M; Sassi, P; Iosif, L and Lark, R (2008) Flexible buildings for an adaptable and sustainable future. In: Dainty, A (ed.) Proceedings of 24th Annual ARCOM Conference, 1-3 September 2008, Cardiff, UK.

Guerra-Santin, O and Silvester, S (2017) Development of Dutch occupancy and heating profiles for building simulation. Building Research & Information, 45(4), pp. 396-413. ISSN 0961-3218

Gujar, S and Deshmukh, A (2023) Methodology for visual comfort analysis in intermediate open spaces of residential areas, case study: Nagpur, India. Architectural Engineering and Design Management, 19(6), pp. 602-619. ISSN 1745-2007

Gunasagaran, S; Mari, T; Mohamed, R; Ng, V and Srirangam, S (2024) Students’ perception of virtual reality applications to analyse daylighting and spatial functions in architecture and environment. Journal of Construction in Developing Countries, 29(2), pp. 147-165. ISSN 1823-6499

Gupta, N K; Thakre, G D and Kumar, M (2020) Dry sliding wear performance on self-healing Al6061 composites. Journal of Engineering, Design and Technology, 18(5), pp. 1357-1370. ISSN 1726-0531

Gupta, R; Gregg, M and Cherian, R (2020) Developing a new framework to bring consistency and flexibility in evaluating actual building performance. International Journal of Building Pathology and Adaptation, 38(1), pp. 228-255. ISSN 23984708

Gupta, R; Gregg, M; Manu, S; Vaidya, P and Dixit, M (2019) Customized performance evaluation approach for Indian green buildings. Building Research & Information, 47(1), pp. 56-74. ISSN 0961-3218

Gurmu, A and Miri, M P (2025) Machine learning regression for estimating the cost range of building projects. Construction Innovation, 25(2), pp. 577-593. ISSN 1471-4175

Hamed, O (2022) Developing a BIM-based tool to automate green buildings assessment: the case of Jordan Green Building Guide. PhD thesis, University of Sheffield, UK.

Hamida, M. B.; Remøy, H.; Gruis, V. and van Laar, B. (2026) Towards promoting circular building adaptability in adaptive reuse projects: A co-developed framework. Smart and Sustainable Built Environment, 15(3), pp. 1313-1340. ISSN 2046-6099

Hamida, M B (2025) Circular and adaptable building transformation: Reconceptualization, practice exploration, framework co‑development and implementation. PhD thesis, Delft University of Technology, Netherlands.

Hamida, M B; Jylhä, T; Remøy, H and Gruis, V (2022) Circular building adaptability and its determinants: a literature review. International Journal of Building Pathology and Adaptation, 41(6), pp. 47-69. ISSN 23984708

Hamida, M B; Remøy, H; Gruis, V and Jylhä, T (2025) Circular building adaptability in adaptive reuse: Multiple case studies in the Netherlands. Journal of Engineering, Design and Technology, 23(1), pp. 161-183. ISSN 1726-0531

Hammad, A; Akbarnezhad, A; Grzybowska, H; Wu, P and Wang, X (2019) Mathematical optimisation of location and design of windows by considering energy performance, lighting and privacy of buildings. Smart and Sustainable Built Environment, 8(2), pp. 117-137. ISSN 2046-6099

Harty, J (2012) The impact of digitalisation on the management role of architectural technology. PhD thesis, Robert Gordon University, UK.

Hashemi, S; Ghaffarianhoseini, A; Ghaffarianhoseini, A; Naismith, N and Jamei, E (2026) A systematic review of microclimate and outdoor thermal comfort studies in Australia and New Zealand. Smart and Sustainable Built Environment, 15(1), pp. 156-181. ISSN 2046-6099

Hassan, M M; Odeh, I and El-Rayes, K (2011) New approach to compare glare and light characteristics of conventional and balloon lighting systems. Journal of Construction Engineering and Management, 137(1), pp. 39-44. ISSN 0733-9364

Hassanain, M A; Sanni-Anibire, M O and Mahmoud, A S (2023) Design quality assessment of campus facilities through post occupancy evaluation. International Journal of Building Pathology and Adaptation, 41(4), pp. 693-712. ISSN 23984708

Hay, R; Samuel, F; Watson, K J and Bradbury, S (2018) Post-occupancy evaluation in architecture: Experiences and perspectives from UK practice. Building Research & Information, 46(6), pp. 698-710. ISSN 0961-3218

He, Y; Bai, W; Ye, Y; Guo, W; Wang, X and Zou, X (2025) A lean approach to enhance the visual experience during wayfinding in the emergency department spaces: a case study of a large-scale general hospital in China. Architectural Engineering and Design Management, 21(4), pp. 642-664. ISSN 1745-2007

Heidrich, O; Kamara, J; Maltese, S; Re Cecconi, F and Dejaco, M C (2017) A critical review of the developments in building adaptability. International Journal of Building Pathology and Adaptation, 35(4), pp. 284-303.

Hema, C; Nshimiyimana, P; Messan, A; Lawane, A and Van Moeseke, G (2024) Reducing overheating risk in naturally ventilated houses through the design of compressed earth blocks walls in hot dry climate. International Journal of Building Pathology and Adaptation, 42(6), pp. 1203-1222. ISSN 2398-4708

Hill, S (1997) The complex effects of obstructions on horizontal illuminance in interior lighting design. PhD thesis, University of Reading, UK.

Hiyasat, R; Sosa, M and Ahmad, L (2023) Use of work-space at home under COVID-19 conditions in the UAE. Engineering, Construction and Architectural Management, 30(8), pp. 3142-3159. ISSN 0969-9988

Holmes, S H; Phillips, T and Wilson, A (2016) Overheating and passive habitability: Indoor health and heat indices. Building Research & Information, 44(1), pp. 1-19. ISSN 0961-3218

Hosseini, S. M.; Heidari, S.; Attia, S.; Wang, J. and Triantafyllidis, G. (2026) Biomimetic kinetic façade as a real-time daylight control: Complex form versus simple form with proper kinetic behavior. Smart and Sustainable Built Environment, 15(2), pp. 472-507. ISSN 2046-6099

Huang, L and Cao, Y (2025) A study on factors influencing the spatial oppressiveness in small courtyard spaces within university residential areas. Architectural Engineering and Design Management, 21(4), pp. 589-602. ISSN 1745-2007

Hyari, K and El-Rayes, K (2006) Lighting requirements for nighttime highway construction. Journal of Construction Engineering and Management, 132(5), pp. 435-443. ISSN 0733-9364

Ilgın, H E (2022) A study on interrelations of structural systems and main planning considerations in contemporary supertall buildings. International Journal of Building Pathology and Adaptation, 41(6), pp. 1-25. ISSN 23984708

Ilgın, H E (2022) Interrelations of slenderness ratio and main design criteria in supertall buildings. International Journal of Building Pathology and Adaptation, 41(6), pp. 139-161. ISSN 23984708

Ilgın, H E (2023) An analysis of space efficiency in asian supertall towers. International Journal of Building Pathology and Adaptation, 41(6), pp. 237-253. ISSN 23984708

Jarkas, A M and Horner, R M W (2015) Creating a baseline for labour productivity of reinforced concrete building construction in Kuwait. Construction Management and Economics, 33(8), pp. 625-639. ISSN 01446193

Jaselskis, E J and El-Misalami, T (2003) Implementing radio frequency identification in the construction process. Journal of Construction Engineering and Management, 129(6), pp. 680-688. ISSN 0733-9364

Jegard, L.; Castaño-Rosa, R. and Pelsmakers, S. (2026) Impact of glazed balcony design on daylight in Finnish apartments. Buildings & Cities, 7(1), pp. 576-596. ISSN 2632-6655

Jiang, H (2012) The development of a scenario independent method for evaluating the evacuation complexity of a building. PhD thesis, University of Greenwich, UK.

Jin, R; Han, S; Hyun, C and Kim, J (2014) Improving accuracy of early stage cost estimation by revising categorical variables in a case-based reasoning model. Journal of Construction Engineering and Management, 140(7): 04014025, ISSN 0733-9364

Jobe, K (2017) A flexible housing approach for self-help housing in Botswana. PhD thesis, University of Bath, UK.

Jones, J W (2008) Wayfinding: A grounded theory study of the information-seeking behavior of constructors. DEd thesis, Ball State University, USA.

Kantianis, D D (2022) Design morphology complexity and conceptual building project cost forecasting. Journal of Financial Management of Property and Construction, 27(3), pp. 387-414. ISSN 1366-4387

Kazar, G and Comu, S (2022) Exploring the relations between the physiological factors and the likelihood of accidents on construction sites. Engineering, Construction and Architectural Management, 29(1), pp. 456-475. ISSN 0969-9988

Kaçel, S and Lau, B (2018) Louis I. Kahn and Richard Kelly: Collaborative design in creation of the luminous environment. Architectural Engineering and Design Management, 14(4), pp. 306-316. ISSN 1745-2007

Khoshbakht Iradmoosa, Maryam (2019) Building performance studies for higher education campus buildings: Energy use, occupant satisfaction and thermal comfort. PhD thesis, Griffith University, Australia.

Khozaei Ravari, F; Hassan, A S; Abdul Nasir, M H and Mohammad Taheri, M (2024) The development of residential spatial configuration for visual privacy in Iranian dwellings, a space syntax approach. International Journal of Building Pathology and Adaptation, 42(4), pp. 672-703. ISSN 23984708

Kinawy, S N (2017) Customizing information delivery for citizens in transportation infrastructure projects: Towards active community participation in decision-making. PhD thesis, University of Toronto, Canada.

Kingma, B R M; Schweiker, M; Wagner, A and van Marken Lichtenbelt, W D (2017) Exploring internal body heat balance to understand thermal sensation. Building Research & Information, 45(7), pp. 808-818. ISSN 0961-3218

Kirkham, R J; Boussabaine, A H and Awwad, B H (2002) Probability distributions of facilities management costs for whole life cycle costing in acute care nhs hospital buildings. Construction Management and Economics, 20(3), pp. 251-261. ISSN 01446193

Kleindienst, S and Andersen, M (2012) Comprehensive annual daylight design through a goal-based approach. Building Research & Information, 40(2), pp. 154-173. ISSN 0961-3218

Ko, W H (2021) View and environmental quality in buildings. PhD thesis, University of California, Berkeley, USA.

Krishnaraj, L; Kumar, V R P; Balasubramanian, M; Kumar, N and Shyamala, T (2022) Futuristic evaluation of building energy simulation model with comparison of conventional villas. International Journal of Construction Management, 22(1), pp. 31-40. ISSN 1562-3599

Krych, K; Heeren, N and Hertwich, E G (2021) Factors influencing the life-cycle GHG emissions of Brazilian office buildings. Buildings & Cities, 2(1), pp. 856-873. ISSN 2632-6655

Kumar, A (1994) Development of a model for determining workzone illumination requirements during nighttime highway construction. PhD thesis, University of Florida, USA.

Kylili, A; Georgali, P Z; Christou, P and Fokaides, P (2024) An integrated building information modeling (BIM)-based lifecycle-oriented framework for sustainable building design. Construction Innovation, 24(2), pp. 492-514. ISSN 1471-4175

Laar, M and Grimme, F W (2002) German developments in daylight guidance systems: An overview. Building Research & Information, 30(4), pp. 282-301. ISSN 0961-3218

Lasebikan, B A; Akisanya, A R and Deans, W F (2015) Autoclave design for high pressure-high temperature corrosion studies. Journal of Engineering, Design and Technology, 13(4), pp. 539-555.

Lau, K K L; Ng, E; Ren, C; Ho, J C K; Wan, L; Shi, Y; Zheng, Y; Gong, F; Cheng, V; Yuan, C; Tan, Z and Wong, K S (2018) Defining the environmental performance of neighbourhoods in high-density cities. Building Research & Information, 46(5), pp. 540-551. ISSN 0961-3218

Lavy, S; Kiss, C W and Fernandez-Solis, J L (2015) Linking design and energy performance in U.S. Military hospitals. Architectural Engineering and Design Management, 11(1), pp. 41-64. ISSN 1745-2007

Leder, S; Newsham, G R; Veitch, J A; Mancini, S and Charles, K E (2016) Effects of office environment on employee satisfaction: A new analysis. Building Research & Information, 44(1), pp. 34-50. ISSN 0961-3218

Leo, L S; Buccolieri, R and Di Sabatino, S (2018) Scale-adaptive morphometric analysis for urban air quality and ventilation applications. Building Research & Information, 46(8), pp. 931-951. ISSN 0961-3218

Lindelöf, D and Morel, N (2008) Bayesian estimation of visual discomfort. Building Research & Information, 36(1), pp. 83-96. ISSN 0961-3218

Ling, F Y Y; Chan, S L; Chong, E and Ee, L P (2004) Predicting performance of design-build and design-bid-build projects. Journal of Construction Engineering and Management, 130(1), pp. 75-83. ISSN 0733-9364

Littlefair, P; Ortiz, J and Bhaumik, C D (2010) A simulation of solar shading control on UK office energy use. Building Research & Information, 38(6), pp. 638-646. ISSN 0961-3218

Littlefair, P J (1998) Predicting lighting energy use under daylight linked lighting controls. Building Research & Information, 26(4), pp. 208-222. ISSN 0961-3218

Love, P E D; Tse, R Y C and Edwards, D J (2005) Time-cost relationships in Australian building construction projects. Journal of Construction Engineering and Management, 131(2), pp. 187-194. ISSN 0733-9364

Lowe, R; Chiu, L F and Oreszczyn, T (2018) Socio-technical case study method in building performance evaluation. Building Research & Information, 46(5), pp. 469-484. ISSN 0961-3218

Luo, M; Zhang, H; Wang, Z; Arens, E; Chen, W; Bauman, F S and Raftery, P (2021) Ceiling-fan-integrated air-conditioning: Thermal comfort evaluations. Buildings & Cities, 2(1), pp. 928-951. ISSN 2632-6655

Mahmoud, H M (1998) Applying a fuzzy logic expert system in the selection of bridge deck joints. PhD thesis, University of Central Florida, USA.

Manewa, R M A S (2012) Economic considerations for adaptability in buildings. PhD thesis, Loughborough University, UK.

Mavahebi Tabatabai, G.; Tahsildoost, M.; Ardekani, A. and Zomorodian, Z. S. (2026) Optimizing urban block layouts and density distribution: A generative design framework for neighborhood performance. Smart and Sustainable Built Environment, 15(5), pp. 1722-1750. ISSN 2046-6099

McCormack, M; Treloar, G J; Palmowski, L and Crawford, R (2007) Modelling direct and indirect water requirements of construction. Building Research & Information, 35(2), pp. 156-162. ISSN 0961-3218

Mehdipoor, A; Iordanova, I and Al-Hussein, M (2025) Enhancing the manufacturing process in light-gauge steel off-site construction using semiautomation. Journal of Construction Engineering and Management, 151(6): 04025055, ISSN 0733-9364

Meinke, A; Hawighorst, M; Wagner, A; Trojan, J and Schweiker, M (2017) Comfort-related feedforward information: Occupants' choice of cooling strategy and perceived comfort. Building Research & Information, 45(1-2), pp. 222-238. ISSN 0961-3218

Meriläinen, S and Tervo, A (2025) The changing typology of urban apartment buildings in Aurinkolahti. Buildings & Cities, 6(1), pp. 50-69. ISSN 2632-6655

Mhundwa, R and Simon, M (2021) Electrical energy prediction using a surface fitting model for an on-farm direct expansion bulk milk cooler (DXBMC) in South Africa. Journal of Engineering, Design and Technology, 19(3), pp. 778-794. ISSN 1726-0531

Moon, H J and Augenbroe, G (2008) Empowerment of decision-makers in mould remediation. Building Research & Information, 36(5), pp. 486-498. ISSN 0961-3218

Morgan, C; Foster, J A; Poston, A and Sharpe, T R (2017) Overheating in Scotland: Contributing factors in occupied homes. Building Research & Information, 45(1-2), pp. 143-156. ISSN 0961-3218

Mostafavi, A; Valentin, V; Abraham, D M and Louis, J (2012) Assessment of the productivity of nighttime asphalt paving operations. Journal of Construction Engineering and Management, 138(12), pp. 1421-1432. ISSN 0733-9364

Mostafavi, F; Tahsildoost, M; Zomorodian, Z S and Shahrestani, S S (2024) An interactive assessment framework for residential space layouts using pix2pix predictive model at the early-stage building design. Smart and Sustainable Built Environment, 13(4), pp. 809-827. ISSN 2046-6099

Mun, H; Jeong, J; Jeong, J and Kumi, L (2025) Statistical hypothesis test approach considering workers' thermal comfort to determine nonworking days in different climate zones. Journal of Construction Engineering and Management, 151(9): 04025116, ISSN 0733-9364

Murtagh, N; Owen, A M and Simpson, K (2023) Engaging UK repair–maintain–improve practitioners in improved building performance. International Journal of Building Pathology and Adaptation, 41(1), pp. 11-24. ISSN 23984708

Muslimin, R. and Brasier, N. (2026) An analysis of outdoor thermal comfort impact on pedestrian walking patterns at sub-hour timescales with agent-based modelling. Smart and Sustainable Built Environment, 15(3), pp. 1149-1176. ISSN 2046-6099

Muthukumaran, V; Kumar, M S and Selladurai, V (2013) Improvement of surface properties of AISI 316lL SS by oxygen and helium ion implantation. Journal of Engineering, Design and Technology, 11(1), pp. 34-43. ISSN 1726-0531

Naik, N S; Elzeyadi, I; Minson, C T and Lee, J H (2021) Thermal pleasure inside solar screened spaces: An experimental study to explore alliesthesia in architecture. Building Research & Information, 49(7), pp. 795-812. ISSN 0961-3218

Nardecchia, F; Mattoni, B; Burattini, C and Bisegna, F (2020) The impact of humidity on vortex creation around isolated buildings. Building Research & Information, 48(5), pp. 551-571. ISSN 0961-3218

Nazeer, S F and De Silva, N (2016) Tbpe scoring framework for tropical buildings. Built Environment Project and Asset Management, 6(2), pp. 174-186. ISSN 2044-124X

Nguyen Van, T; Nguyen Hieu, T and De Troyer, F (2016) Managing pile foundation and land cost for high-rise buildings in the early design stages. Architectural Engineering and Design Management, 12(3), pp. 151-169. ISSN 1745-2007

Nigra, M; Lo Verso, V R M; Robiglio, M; Pellegrino, A and Martina, M (2022) 'Re-coding' environmental regulation–a new simplified metric for daylighting verification during the window and indoor space design process. Architectural Engineering and Design Management, 18(4), pp. 521-544. ISSN 1745-2007

Nkado, R N (1991) A construction time information system for the building industry. PhD thesis, University of Reading, UK.

Nkado, R N (1992) Construction time information system for the building industry. Construction Management and Economics, 10(6), pp. 489-509. ISSN 01446193

Noorzai, E; Bakmohammadi, P and Garmaroudi, M A (2023) Optimizing daylight, energy and occupant comfort performance of classrooms with photovoltaic integrated vertical shading devices. Architectural Engineering and Design Management, 19(4), pp. 394-418. ISSN 1745-2007

Odeh, I; El-Rayes, K and Liu, L (2009) Field experiments to evaluate and control light tower glare in nighttime work zones. Journal of Construction Engineering and Management, 135(9), pp. 911-919. ISSN 0733-9364

Odeh, I S M (2010) Evaluation of glare and lighting performance in nighttime highway construction projects. PhD thesis, University of Illinois at Urbana-Champaign, USA.

Olatunji, O A (2008) A comparative analysis of tender sums and final costs of public construction and supply projects in Nigeria. Journal of Financial Management of Property and Construction, 13(1), pp. 60-79. ISSN 1366-4387

Olbina, S and Beliveau, Y (2009) Developing a transparent shading device as a daylighting system. Building Research & Information, 37(2), pp. 148-163. ISSN 0961-3218

Ollár, A (2024) Circular building adaptability in multi-residential buildings: The status quo and a conceptual design framework. International Journal of Building Pathology and Adaptation, 42(7), pp. 1-17. ISSN 23984708

Onitiri, M A and Adedayo, S M (2015) Compressive behaviour of polypropylene filled with iron ore tailings. Journal of Engineering, Design and Technology, 13(2), pp. 198-212.

Oo, B-L and Drew, D S (2008) Adapting building design to access by individuals with intellectual disability. Construction Economics and Building, 8(1), pp. 11-22. ISSN 2204-9029

Pallubinsky, H; Kingma, B R M; Schellen, L; Dautzenberg, B; van Baak, M A and van Marken Lichtenbelt, W D (2017) The effect of warmth acclimation on behaviour, thermophysiology and perception. Building Research & Information, 45(7), pp. 800-807. ISSN 0961-3218

Parkinson, T and De Dear, R (2015) Thermal pleasure in built environments: Physiology of alliesthesia. Building Research & Information, 43(3), pp. 288-301. ISSN 0961-3218

Parkinson, T and de Dear, R (2016) Thermal pleasure in built environments: Spatial alliesthesia from contact heating. Building Research & Information, 44(3), pp. 248-262. ISSN 0961-3218

Parkinson, T and de Dear, R (2017) Thermal pleasure in built environments: Spatial alliesthesia from air movement. Building Research & Information, 45(3), pp. 320-335. ISSN 0961-3218

Parkinson, T; de Dear, R and Candido, C (2016) Thermal pleasure in built environments: Alliesthesia in different thermoregulatory zones. Building Research & Information, 44(1), pp. 20-33. ISSN 0961-3218

Passe, U (2020) A design workflow for integrating performance into architectural education. Buildings & Cities, 1(1), pp. 565-578. ISSN 2632-6655

Patel, H and Green, S D (2020) Beyond the performance gap: Reclaiming building appraisal through archival research. Building Research & Information, 48(5), pp. 469-484. ISSN 0961-3218

Patil, M. P.; Salama, A. M.; Arnfield, J. and Alvanides, S. (2026) Youwalk-youreclaim: A co-assessment approach for active university campus environments. Smart and Sustainable Built Environment, 15(5), pp. 1663-1694. ISSN 2046-6099

Patil, S; Goudar, M and Kharadkar, R (2022) Neural network-based estimation of lighting condition in indoor environment with improved brain storm algorithm. Journal of Engineering, Design and Technology, 20(6), pp. 1565-1580. ISSN 1726-0531

Pavlovas, V (2006) Energy savings in existing Swedish apartment buildings: Some aspects on demand controlled ventilation and individual metering. PhD thesis, Chalmers Tekniska Hogskola, Sweden.

Pinheiro, Gustavo Focesi (2022) The importance of municipal public policies for the design of sustainable buildings and cities: Focus on the city of Campinas – SP. PhD thesis, Universidade Estadual de Campinas, Brazil.

Pinheiro, Gustavo Focesi (2022) The importance of municipal public policies for the design of sustainable buildings and cities. Unpublished PhD thesis, Universidade Estadual de Campinas, Brazil.

Pérez-Bella, J M; Domínguez-Hernández, J; Rodríguez-Soria, B; Del Coz-Díaz, J J and Cano-Suñén, E (2013) A new method for determining the water tightness of building facades. Building Research & Information, 41(4), pp. 401-414. ISSN 0961-3218

Qian, Q K; Fan, K and Chan, E H W (2016) Regulatory incentives for green buildings: Gross floor area concessions. Building Research & Information, 44(5-6), pp. 675-693. ISSN 0961-3218

Queiroz, N; Fernandes, L and Fernando Oscar Ruttkay, P (2024) Comparison of fast daylighting climate-based simulation methods for parametric design: Two-phase, three-phase method and path tracing. Architectural Engineering and Design Management, 20(3), pp. 559-577. ISSN 1745-2007

Rahmani Asl, M (2015) A building information model (BIM) based framework for performance optimization. PhD thesis, Texas A&M University, USA.

Ramalingam Rethnam, O. and Thomas, A. (2026) A physics-informed deep learning-based urban building thermal comfort modeling and prediction framework for identifying thermally vulnerable building stock. Smart and Sustainable Built Environment, 15(2), pp. 622-648. ISSN 2046-6099

Rana Abdollahi, R; Bagherzadeh, F; Schnabel, M A and Bakshi, N (2024) A design methodology to consider occupants' spatial adjustment and manage view content in adaptive façade design for improving visual comfort. Architectural Engineering and Design Management, 20(1), pp. 168-190. ISSN 1745-2007

Ribeiro, C; Pereira, P F; Ramos, N M M; Flores-Colen, I and Valentim, N (2024) Assessment of the impacts of balconies on indoor environmental quality in mild climate conditions, Portugal. Building Research & Information, 52(3), pp. 292-310. ISSN 0961-3218

Rooke, C N; Rooke, J A; Koskela, L and Tzortzopoulos, P (2010) Using the physical properties of artefacts to manage through-life knowledge flows in the built environment: An initial exploration. Construction Management and Economics, 28(6), pp. 601-613. ISSN 1466433X

Roskams, M J and Haynes, B P (2021) Testing the relationship between objective indoor environment quality and subjective experiences of comfort. Building Research & Information, 49(4), pp. 387-398. ISSN 0961-3218

Roy, S; Majumder, S; Bhattacharya, S and Sardar, I H (2021) Simulation and analysis of the effects of room surface reflectance combinations on a proposed retrofit illumination system of an office. Journal of Engineering, Design and Technology, 19(6), pp. 1620-1647. ISSN 1726-0531

Ryu, S R; Rhee, K N; Yeo, M S and Kim, K W (2008) Strategies for flow rate balancing in radiant floor heating systems. Building Research & Information, 36(6), pp. 625-637. ISSN 0961-3218

Saade, M R M; da Silva, M G; Gomes, V; Franco, H G; Schwamback, D and Lavor, B (2014) Material eco-efficiency indicators for Brazilian buildings. Smart and Sustainable Built Environment, 3(1), pp. 54-71. ISSN 2046-6099

Safizadeh, M (2024) Simulation of the circulation complexity in student residence buildings using space syntax analyses (Case studies: Highland hall, Rita Atkinson, Rutgers University and Tooker Residences, USA). Architectural Engineering and Design Management, 20(4), pp. 741-760. ISSN 1745-2007

Sakib, M N; Chaspari, T and Behzadan, A H (2022) A feedforward neural network for drone accident prediction from physiological signals. Smart and Sustainable Built Environment, 11(4), pp. 1017-1041. ISSN 2046-6099

Sakpere, W E; Mlitwa, N B W and Oshin, M A (2017) Towards an efficient indoor navigation system: A near field communication approach. Journal of Engineering, Design and Technology, 15(4), pp. 505-527.

Salat, S (2009) Energy loads, CO2 emissions and building stocks: Morphologies, typologies, energy systems and behaviour. Building Research & Information, 37(5-6), pp. 598-609. ISSN 0961-3218

Sanni-Anibire, M O and Adenle, Y A (2024) Residential satisfaction of vertical urban settlements in Hong Kong. Journal of Engineering, Design and Technology, 22(6), pp. 1705-1722. ISSN 1726-0531

Sanusi, K O and Oliver, G J (2009) Effects of grain size on mechanical properties of nanostructured copper alloy by severe plastic deformation (SPD) process. Journal of Engineering, Design and Technology, 7(3), pp. 335-341. ISSN 1726-0531

Saratsis, E; Dogan, T and Reinhart, C F (2017) Simulation-based daylighting analysis procedure for developing urban zoning rules. Building Research & Information, 45(5), pp. 478-491. ISSN 0961-3218

Sari, L H; Kayan, B A and Zahriah, Z (2024) An assessment of indoor environmental quality in COVID-19 affected houses: A case study in Banda Aceh, Indonesia. International Journal of Building Pathology and Adaptation, 42(5), pp. 932-956. ISSN 2398-4708

Sarkar, D; Bapat, H; Bhattacharjee, B and Jha, B (2025) Automation and optimization in daylight analysis and life cycle assessment for automated daylight monitoring device for a metro rail station box in Ahmedabad, India. International Journal of Construction Management, 25(1), pp. 124-138. ISSN 1562-3599

Saroglou, T; Itzhak-Ben-Shalom, H and Meir, I A (2022) Pedestrian thermal perception: Studies around two high-rise buildings in the mediterranean climate. Building Research & Information, 50(1-2), pp. 171-191. ISSN 0961-3218

Sayın, S and Çelebi, G (2020) A practical approach to performance-based building design in architectural project. Building Research & Information, 48(4), pp. 446-468. ISSN 0961-3218

Schellen, L; Loomans, M; De Wit, M and Van Marken Lichtenbelt, W (2013) The influence of different cooling techniques and gender on thermal perception. Building Research & Information, 41(3), pp. 330-341. ISSN 0961-3218

Seneviratne, K; Amaratunga, D and Haigh, R (2017) Managing housing needs of post conflict housing reconstruction: Sri Lankan perspective. Engineering, Construction and Architectural Management, 24(2), pp. 275-288. ISSN 0969-9988

Shahi, S; Beesley, P and Haas, C T (2023) Creating space and time for innovation: a methodology for building adaptation design appraisal using physics-based simulation tools and interactive multi-objective optimization. Engineering, Construction and Architectural Management, 30(3), pp. 1098-1121. ISSN 0969-9988

Sharifi, S; Saman, W; Alemu, A and Boland, J (2021) A proposed long-term thermal comfort scale. Building Research & Information, 49(6), pp. 661-678. ISSN 0961-3218

Sharmin, T and Khalid, R (2022) Post occupancy and participatory design evaluation of a marginalized low-income settlement in ahmedabad, India. Building Research & Information, 50(5), pp. 574-594. ISSN 0961-3218

Sharpe, T (2019) Ethical issues in domestic building performance evaluation studies. Building Research & Information, 47(3), pp. 318-329. ISSN 0961-3218

Shih, N J and Huang, Y S (2001) A study of reflection glare in taipei. Building Research & Information, 29(1), pp. 30-39. ISSN 0961-3218

Shipworth, M; Firth, S K; Gentry, M I; Wright, A J; Shipworth, D T and Lomas, K J (2010) Central heating thermostat settings and timing: Building demographics. Building Research & Information, 38(1), pp. 50-69. ISSN 0961-3218

Shooshtarian, S and Ridley, I (2016) Determination of acceptable thermal range in outdoor built environments by various methods. Smart and Sustainable Built Environment, 5(4), pp. 352-371. ISSN 2046-6099

Simons, B.; Akubah, J. T.; Amos-Abanyie, S.; Adade-Boateng, A. O. and Simpeh, E. K. (2026) A daylight performance analysis of a design block fenestrated classroom in Ghana: A point-in-time versus simulated analysis. International Journal of Building Pathology and Adaptation, 44(4), pp. 1013-1029. ISSN 2398-4708

Song, X; Carlsson, C and Nguyen, D (2025) Life cycle assessment of geotechnical works for high-rise building construction on soft clay in Sweden. Building Research & Information, 53(6), pp. 717-733. ISSN 0961-3218

Sorooshnia, E; Rashidi, M; Rahnamayiezekavat, P; Rezaei, F and Samali, B (2023) Optimum external shading system for counterbalancing glare probability and daylight illuminance in sydney's residential buildings. Engineering, Construction and Architectural Management, 30(1), pp. 296-320. ISSN 0969-9988

Sousa, V; Almeida, N M and Dias, L A (2014) Role of statistics and engineering judgment in developing optimized time-cost relationship models. Journal of Construction Engineering and Management, 140(8): 04014034, ISSN 0733-9364

Ssenyimba, S; Kigozi, J; Tumutegyereize, P; Muyonga, J H and Mutumba, R (2022) Design and evaluation of a refractance window lab-scale dryer. Journal of Engineering, Design and Technology, 20(6), pp. 1499-1518. ISSN 1726-0531

Steadman, P; Evans, S and Batty, M (2009) Wall area, volume and plan depth in the building stock. Building Research & Information, 37(5-6), pp. 455-467. ISSN 0961-3218

Stevenson, F (2019) Embedding building performance evaluation in UK architectural practice and beyond. Building Research & Information, 47(3), pp. 305-317. ISSN 0961-3218

Stevenson, F and Baborska-Narozny, M (2018) Housing performance evaluation: Challenges for international knowledge exchange. Building Research & Information, 46(5), pp. 501-512. ISSN 0961-3218

Stevenson, F and Rijal, H B (2010) Developing occupancy feedback from a prototype to improve housing production. Building Research & Information, 38(5), pp. 549-563. ISSN 0961-3218

Stoy, C and Schalcher, H R (2007) Residential building projects: Building cost indicators and drivers. Journal of Construction Engineering and Management, 133(2), pp. 139-145. ISSN 0733-9364

Summerfield, A J; Lowe, R J and Oreszczyn, T (2010) Two models for benchmarking UK domestic delivered energy. Building Research & Information, 38(1), pp. 12-24. ISSN 0961-3218

Swaffield, L M and Pasquire, C L (1999) Examination of relationships between building form and function, and the cost of mechanical and electrical services. Construction Management and Economics, 17(4), pp. 483-492. ISSN 01446193

Tam, C M; Tong, T K L; Lau, T C T and Chan, K K (2005) Selection of vertical formwork system by probabilistic neural networks models. Construction Management and Economics, 23(3), pp. 245-254. ISSN 01446193

Terzioglu, T and Polat, G (2026) Evaluating interactions between formwork system selection criteria for building construction projects: A rough DEMATEL approach. Journal of Construction Engineering and Management, 152(1): 04025225, ISSN 0733-9364

Teshnehdel, S; Soflaei, F and Shokouhian, M (2020) Assessment of solar shading performance of courtyard houses in desert climate of Kashan, Iran. Architectural Engineering and Design Management, 16(6), pp. 473-492. ISSN 1745-2007

Thomas, J; Giddings, B and Little, L (2006) An holistic evaluation of the workplace environment. In: Boyd, D (ed.) Proceedings of 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Thomas, L E (2010) Evaluating design strategies, performance and occupant satisfaction: A low carbon office refurbishment. Building Research & Information, 38(6), pp. 610-624. ISSN 0961-3218

Traylor, C; Zhao, W and Tao, Y X (2019) Utilizing modulating-temperature setpoints to save energy and maintain alliesthesia-based comfort. Building Research & Information, 47(2), pp. 190-201. ISSN 0961-3218

Trinh, Hoang T (2021) Optimisation framework for sustainable design of concrete buildings. PhD thesis, Griffith University, Australia.

Tugrul Okbaz, F (2025) Evaluation of space efficiency criteria in high-rise buildings based on functions: A case study of türkiye. Architectural Engineering and Design Management, 21(1), pp. 60-77. ISSN 1745-2007

Tweed, C and Zapata-Lancaster, G (2018) Interdisciplinary perspectives on building thermal performance. Building Research & Information, 46(5), pp. 552-565. ISSN 0961-3218

Umer, W; Yu, Y and Antwi Afari, M F (2022) Quantifying the effect of mental stress on physical stress for construction tasks. Journal of Construction Engineering and Management, 148(3): 04021204, ISSN 0733-9364

Unver, H; Alptekin, O and Kalkan, M (2024) Comparison of the building adaptability assessment models: A semi-systematic review. International Journal of Building Pathology and Adaptation, 42(5), pp. 982-1001. ISSN 2398-4708

Valitabar, M; GhaffarianHoseini, A; GhaffarianHoseini, A and Attia, S (2022) Advanced control strategy to maximize view and control discomforting glare: A complex adaptive façade. Architectural Engineering and Design Management, 18(6), pp. 829-849. ISSN 1745-2007

Vargas, G; Lawrence, R and Stevenson, F (2017) The role of lobbies: Short-term thermal transitions. Building Research & Information, 45(7), pp. 759-782. ISSN 0961-3218

Vatankhah, M; Vakilinezhad, R; Zakeri, S M H and Fattahi, K (2024) Optimizing energy and daylight performance of vernacular dwellings for contemporary architecture: A parametric analysis. Architectural Engineering and Design Management, 20(6), pp. 1795-1814. ISSN 1745-2007

Victoria, M F (2017) Developing decision support models for early stage embodied carbon management in buildings. PhD thesis, Northumbria University, UK.

Vidanapathirana, M; Perera, N; Emmanuel, R and Coorey, S (2025) High-rise building density optimization for air quality improvement and investment potential. Built Environment Project and Asset Management, 15(3), pp. 467-482. ISSN 2044-124X

Von Kluge, P. N.; Doumia, B. and Sengha, G. G. (2026) Nonlinear soil-structure interaction effects on eccentric seismic pounding and torsional response of adjacent buildings: Experimental validation and reduced-order modelling. Architectural Engineering and Design Management, 22(3), pp. 809-843. ISSN 1745-2007

Weerasinghe, A S; Ramachandra, T and Nawarathna, A (2019) Effects of green retrofits: A case of industrial manufacturing buildings in Sri Lanka. In: Gorse, C and Neilson, C J (eds.) Proceedings of 35th Annual ARCOM Conference, 2-4 September 2019, Leeds Beckett University, Leeds, UK.

Weerasinghe, A S; Ramachandra, T and Rotimi, J O B (2022) Towards sustainable commercial buildings: An analysis of operation and maintenance (O&M) costs in Sri Lanka. Smart and Sustainable Built Environment, 11(3), pp. 454-468. ISSN 2046-6099

Willems, S; Saelens, D and Heylighen, A (2024) How to investigate differences in indoor environmental comfort and adaptation? Mixed methods research with patients. Building Research & Information, 52(8), pp. 851-869. ISSN 0961-3218

Wu, H; Sun, X and Wu, Y (2022) Methods for probability distributions estimation of indoor environmental parameters and long-term IEQ assessment. Building Research & Information, 50(7), pp. 771-791. ISSN 0961-3218

Yamakawa, S (1997) The development of a framework for inter-diciplinary building design working, and the application of intelligent knowledge-base system techniques. PhD thesis, Cranfield University, UK.

Yeung, H C; Ridwan, T; Tariq, S and Zayed, T (2022) Beam plus implementation in Hong Kong: Assessment of challenges and policies. International Journal of Construction Management, 22(14), pp. 2830-2844. ISSN 1562-3599

Yildirim, K; Lutfi Hidayetoglu, M and Sen, A (2012) Effects on sustainability of various skylight systems in buildings with an atrium. Smart and Sustainable Built Environment, 1(2), pp. 139-152. ISSN 2046-6099

Yusoff, W F M; Shaharil, M I; Mohamed, M F; Rasani, M R M; Sapian, A R and Dahlan, N D (2023) Review of openings with shading devices at naturally ventilated buildings. Architectural Engineering and Design Management, 19(5), pp. 463-479. ISSN 1745-2007

Zani, A; Speroni, A; Mainini, A G; Zinzi, M; Caldas, L and Poli, T (2024) Customized shading solutions for complex building façades: The potential of an innovative cement-textile composite material through a performance-based generative design. Construction Innovation, 24(1), pp. 256-279. ISSN 1471-4175

Zeiler, W; Vissers, D; Maaijen, R and Boxem, G (2014) Occupants' behavioural impact on energy consumption: 'Human-in-the-loop' comfort process control. Architectural Engineering and Design Management, 10(1-2), pp. 108-130. ISSN 1745-2007

Zeng, C (2014) Automated building information extraction and evaluation from high-resolution remotely sensed data. PhD thesis, University of Western Ontario, Canada.

Zhang, S; Duan, J; Sunindijo, R Y and Xu, Q (2026) Building psychological resilience to improve the mental health of construction professionals. Journal of Construction Engineering and Management, 152(4): 04026030, ISSN 0733-9364

Zhang, L (2021) Artificial neural network intelligent technique and multiple nonlinear regression for prediction and optimization of the transmittance of lightpipes and implementation in BIM. PhD thesis, University of Nottingham, UK.

Zhang, Z; Zhang, Y and Jin, L (2017) Thermal comfort of rural residents in a hot-humid area. Building Research & Information, 45(1-2), pp. 209-221. ISSN 0961-3218

Zhao, Y (2022) An ontology-based semantic building post-occupancy evaluation framework and its application. PhD thesis, Brunel University, UK.

Zhao, Y; Mantha, B R K; Knijnenburg, B P and Li, D (2025) Exploring the feasibility of mobile robots for post-occupancy evaluations. Building Research & Information, 53(1-2), pp. 165-182. ISSN 0961-3218

Zimmermann, R K; Barjot, Z; Rasmussen, F N; Malmqvist, T; Kuittinen, M and Birgisdottir, H (2023) GHG emissions from building renovation versus new-build: Incentives from assessment methods. Buildings & Cities, 4(1), pp. 274-291. ISSN 2632-6655

Çepni, M. S.; Kutluca, A. K.; Salihoğlu, T.; Atmaca, A. and Mintemur, S. (2026) Changing land-use metrics in mass housing: Türkiye case study. Buildings & Cities, 7(1), pp. 541-558. ISSN 2632-6655